Earthquake-reactivated landslide scenarios in Southern Italy based on spectral-matching input analysis

n/

Rainfall Thresholding and Susceptibility assessment of rainfall induced landslides: application to landslide management in St Thomas, Jamaica

The final publication is available at Springer via http://dx.doi.org/10.1007/s10064-009-0232-zThe parish of St Thomas has one of the highest densities of landslides in Jamaica, which impacts the residents, local economy and the built and natural environment. These landslides result from a combination of steep slopes, faulting, heavy rainfall and the presence of highly weathered volcanics, sandstones, limestones and sandstone/shale series and are particularly prevalent during the hurricane season (June–November). The paper reports a study of the rainfall thresholds and landslide susceptibility assessment to assist the prediction, mitigation and management of slope instability in landslide-prone areas of the parish

Seismically induced landslide hazard and exposure modelling in Southern California based on the 1994 Northridge, California earthquake event

Quantitative modelling of landslide hazard, as opposed to landslide susceptibility, as a function of the earthquake trigger is vital in understanding and assessing future potential exposure to landsliding. Logistic regression analysis is a method commonly used to assess susceptibility to landsliding; however, estimating probability of landslide hazard as a result of an earthquake trigger is rarely undertaken. This paper utilises a very detailed landslide inventory map and a comprehensive dataset on peak ground acceleration for the 1994 Mw6.7 Northridge earthquake event to fit a landslide hazard logistic regression model. The model demonstrates a high success rate for estimating probability of landslides as a result of earthquake shaking. Seven earthquake magnitude scenarios were simulated using the Open Source Seismic Hazard Analysis (OpenSHA) application to simulate peak ground acceleration, a covariate of landsliding, for each event. The exposure of assets such as population, housing and roads to high levels of shaking and high probabilities of landsliding was estimated for each scenario. There has been urban development in the Northridge region since 1994, leading to an increase in prospective exposure of assets to the earthquake and landslide hazards in the event of a potential future earthquake. As the earthquake scenario magnitude increases, the impact from earthquake shaking initially increases then quickly levels out, but potential losses from landslides increase at a rapid rate. The modelling approach, as well as the specific model, developed in this paper can be used to estimate landslide probabilities as a result of an earthquake event for any scenario where the peak ground acceleration variable is available

Semi-empirical relationships to assess the seismic performance of slopes from an updated version of the Italian seismic database

Funder: Dipartimento della Protezione Civile, Presidenza del Consiglio dei Ministri; doi: http://dx.doi.org/10.13039/100012783; Grant(s): ReLUIS research project - Working Pachage 16: Geotechnical Engineering - Task Group 2: Slope stabilityAbstractSeismic performance of slopes can be assessed through displacement-based procedures where earthquake-induced displacements are usually computed following Newmark-type calculations. These can be adopted to perform a parametric integration of earthquake records to evaluate permanent displacements for different slope characteristics and seismic input properties. Several semi-empirical relationships can be obtained for different purposes: obtaining site-specific displacement hazard curves following a fully-probabilistic approach, to assess the seismic risk associated with the slope; providing semi-empirical models within a deterministic framework, where the seismic-induced permanent displacement is compared with threshold values related to different levels of seismic performance; calibrating the seismic coefficient to be used in pseudo-static calculations, where a safety factor against limit conditions is computed. In this paper, semi-empirical relationships are obtained as a result of a parametric integration of an updated version of the Italian strong-motion database, that, in turn, is described and compared to older versions of the database and to well-known ground motion prediction equations. Permanent displacement is expressed as a function of either ground motion parameters, for a given yield seismic coefficient of the slope, or of both ground motion parameters and the seismic coefficient. The first are meant to be used as a tool to develop site-specific displacement hazard curves, while the last can be used to evaluate earthquake-induced slope displacements, as well as to calibrate the seismic coefficient to be used in a pseudo-static analysis. Influence of the vertical component of seismic motion on these semi-empirical relationships is also assessed.</jats:p

Archaeoseismology: Methodological issues and procedure

Archaeoseismic research contributes important data on past earthquakes. A limitation of the usefulness of archaeoseismology is due to the lack of continuous discussion about the methodology. The methodological issues are particularly important because archaeoseismological investigations of past earthquakes make use of a large variety of methods. Typical in situ investigations include: (1) reconstruction of the local archaeological stratigraphy aimed at defining the correct position and chronology of a destruction layer, presumably related to an earthquake; (2) analysis of the deformations potentially due to seismic shaking or secondary earthquake effects, detectable on walls; (3) analysis of the depositional characteristics of the collapsed material; (4) investigations of the local geology and geomorphology to define possible natural cause(s) of the destruction; (5) investigations of the local factors affecting the ground motion amplifications; and (6) estimation of the dynamic excitation, which affected the site under investigation. Subsequently, a 'territorial' approach testing evidence of synchronous destruction in a certain region may delineate the extent of the area struck by the earthquake. The most reliable results of an archaeoseismological investigation are obtained by application of modern geoarchaeological practice (archaeological stratigraphy plus geological–geomorphological data), with the addition of a geophysical-engineering quantitative approach and (if available) historical information. This gives a basic dataset necessary to perform quantitative analyses which, in turn, corroborate the archaeoseismic hypothesis. Since archaeoseismological investigations can reveal the possible natural causes of destruction at a site, they contribute to the wider field of environmental archaeology, that seeks to define the history of the relationship between humans and the environment. Finally, through the improvement of the knowledge on the past seismicity, these studies can contribute to the regional estimation of seismic hazard

Control of style-of-faulting on spatial pattern of earthquake-triggered landslides

Predictive mapping of susceptibility to earthquake-triggered landslides (ETLs) commonly uses distance to fault as spatial predictor, regardless of style-of-faulting. Here, we examined the hypothesis that the spatial pattern of ETLs is influenced by style-of-faulting based on distance distribution analysis and Fry analysis. The Yingxiu–Beichuan fault (YBF) in China and a huge number of landslides that ruptured and occurred, respectively, during the 2008 Wenchuan earthquake permitted this study because the style-of-faulting along the YBF varied from its southern to northern parts (i.e. mainly thrust-slip in the southern part, oblique-slip in the central part and mainly strike-slip in the northern part). On the YBF hanging-wall, ETLs at 4.4–4.7 and 10.3–11.5 km from the YBF are likely associated with strike- and thrust-slips, respectively. On the southern and central parts of the hanging-wall, ETLs at 7.5–8 km from the YBF are likely associated with oblique-slips. These findings indicate that the spatial pattern of ETLs is influenced by style-of-faulting. Based on knowledge about the style-of-faulting and by using evidential belief functions to create a predictor map based on proximity to faults, we obtained higher landslide prediction accuracy than by using unclassified faults. When distance from unclassified parts of the YBF is used as predictor, the prediction accuracy is 80%; when distance from parts of the YBF, classified according to style-of-faulting, is used as predictor, the prediction accuracy is 93%. Therefore, mapping and classification of faults and proper spatial representation of fault control on occurrence of ETLs are important in predictive mapping of susceptibility to ETLs