Automatic, fast and robust characterization of noise distributions for diffusion MRI

Knowledge of the noise distribution in magnitude diffusion MRI images is the centerpiece to quantify uncertainties arising from the acquisition process. The use of parallel imaging methods, the number of receiver coils and imaging filters applied by the scanner, amongst other factors, dictate the resulting signal distribution. Accurate estimation beyond textbook Rician or noncentral chi distributions often requires information about the acquisition process (e.g. coils sensitivity maps or reconstruction coefficients), which is not usually available. We introduce a new method where a change of variable naturally gives rise to a particular form of the gamma distribution for background signals. The first moments and maximum likelihood estimators of this gamma distribution explicitly depend on the number of coils, making it possible to estimate all unknown parameters using only the magnitude data. A rejection step is used to make the method automatic and robust to artifacts. Experiments on synthetic datasets show that the proposed method can reliably estimate both the degrees of freedom and the standard deviation. The worst case errors range from below 2% (spatially uniform noise) to approximately 10% (spatially variable noise). Repeated acquisitions of in vivo datasets show that the estimated parameters are stable and have lower variances than compared methods.Comment: v2: added publisher DOI statement, fixed text typo in appendix A

The role of crustal accretion variations in determining slab hydration at an Atlantic subduction zone

We present a 2D P-wave velocity model from the outer rise region of the Lesser Antilles island arc, the first wide-angle seismic study of outer rise processes at an Atlantic subduction zone. The survey consists of 46 OBS receivers over a 174 km profile with velocities resolved to 15 km below top basement. The final velocity model, produced through tomographic inversion, shows a clear decrease in the velocity of the lower crust and upper mantle of the incoming plate as it approaches the trench. We attribute this drop to outer rise bend-related hydration, similar to Pacific cases, but superimposed on spatial variations in hydration generated at the slow-spreading ridge axis. In thin, tectonically controlled crust formed under magma-poor spreading conditions the superposition of these sources of hydration results in compressional velocities as low as 6.5 km s−1 beneath the PmP reflector. In contrast, segments of crust interpreted as having formed under magma-rich conditions show velocity reductions and inferred hydrous alteration more like that observed in the Pacific. Hence, variations in the style of crustal accretion, which is observed on 50–100 km length scales both along and across isochrons, is a primary control over the distribution of water within the slab at Atlantic subduction systems. This heterogeneous pattern of water storage within the slab is likely further complicated by along strike variations in outer rise bending, subducting fracture zones and deformation at segment ends and may have important implications for our understanding of long-term patterns of hazard at Atlantic subduction systems

Síndrome de Stevens-Johnson. Apresentação de Caso Clínico

Introdução: A Síndrome de Stevens-Johnson (SSJ) é uma doença mucocutânea rara e potencialmente fatal, mais frequente no sexo masculino, cuja incidência aumenta com a idade e em determinados grupos de risco. A SSJ e a Necrólise Tóxica Epidérmica (NET) são duas entidades da mesma doença, com severidade diferente. A etiologia não é clara, mas pensa-se que se deva maioritariamente a reacções adversas a fármacos. Caso clínico: Um jovem de 17 anos de idade, sem antecedentes pessoais relevantes, foi observado no Serviço de Urgência por surgimento de lesões maculopapulares, com 3 dias de evolução, dispersas pela face, cavidade oral, tronco e extremidades, com prostração e taquicardia. Foi internado com o diagnóstico de SSJ. Discussão e Conclusões: O SSJ e a NET têm grande morbilidade e considerável mortalidade. O rápido reconhecimento desta identidade, com a remoção do fármaco desencadeador é essencial. A perda da função de barreira da pele, com a consequente alteração da homeostasia, implica muitas vezes a manutenção da terapêutica de suporte em Unidades de Cuidados Intensivos ou de Queimados.info:eu-repo/semantics/publishedVersio

"I am your mother and your father!": In vitro derived gametes and the ethics of solo reproduction

In this paper, we will discuss the prospect of human reproduction achieved with gametes originating from only one person. According to statements by a minority of scientists working on the generation of gametes in vitro, it may become possible to create eggs from men’s non-reproductive cells and sperm from women’s. This would enable, at least in principle, the creation of an embryo from cells obtained from only one individual: ‘solo reproduction’. We will consider what might motivate people to reproduce in this way, and the implications that solo reproduction might have for ethics and policy. We suggest that such an innovation is unlikely to revolutionise reproduction and parenting. Indeed, in some respects it is less revolutionary than in vitro fertilisation as a whole. Furthermore, we show that solo reproduction with in vitro created gametes is not necessarily any more ethically problematic than gamete donation—and probably less so. Where appropriate, we draw parallels with the debate surrounding reproductive cloning. We note that solo reproduction may serve to perpetuate reductive geneticised accounts of reproduction, and that this may indeed be ethically questionable. However, in this it is not unique among other technologies of assisted reproduction, many of which focus on genetic transmission. It is for this reason that a ban on solo reproduction might be inconsistent with continuing to permit other kinds of reproduction that also bear the potential to strengthen attachment to a geneticised account of reproduction. Our claim is that there are at least as good reasons to pursue research towards enabling solo reproduction, and eventually to introduce solo reproduction as an option for fertility treatment, as there are to do so for other infertility related purposes

Identifying predictors of ventral hernia recurrence: systematic review and meta-analysis.

BACKGROUND: Ventra hernias are increasing in prevalence and many recur despite attempted repair. To date, much of the literature is underpowered and divergent. As a result there is limited high quality evidence to inform surgeons succinctly which perioperative variables influence postoperative recurrence. This systematic review aimed to identify predictors of ventral hernia recurrence. METHODS: PubMed was searched for studies reporting prognostic data of ventral hernia recurrence between 1 January 1995 and 1 January 2018. Extracted data described hernia type (primary/incisional), definitions of recurrence, methods used to detect recurrence, duration of follow-up, and co-morbidity. Data were extracted for all potential predictors, estimates and thresholds described. Random-effects meta-analysis was used. Bias was assessed with a modified PROBAST (Prediction model Risk Of Bias ASsessment Tool). RESULTS: Screening of 18 214 abstracts yielded 274 individual studies for inclusion. Hernia recurrence was defined in 66 studies (24.1 per cent), using 41 different unstandardized definitions. Three patient variables (female sex, age 65 years or less, and BMI greater than 25, 30, 35 or 40 kg/m2), five patient co-morbidities (smoking, diabetes, chronic obstructive pulmonary disease, ASA grade III-IV, steroid use), two hernia-related variables (incisional/primary, recurrent/primary), six intraoperative variables (biological mesh, bridged repair, open versus laparoscopic surgery, suture versus mesh repair, onlay/retrorectus, intraperitoneal/retrorectus), and six postoperative variables (any complication, surgical-site occurrence, wound infection, seroma, haematoma, wound dehiscence) were identified as significant prognostic factors for hernia recurrence. CONCLUSION: This study summarized the current evidence base for predicting ventral hernia recurrence. Results should inform best practice and future research

Patient and surgery related factors associated with fatigue type polyethylene wear on 49 PCA and DURACON retrievals at autopsy and revision

<p>Abstract</p> <p>Background</p> <p>Polyethylene wear is an important factor for longevity of total knee arthroplasty. Proven and suspicious factors causing wear can be grouped as material, patient and surgery related. There are more studies correlating design and/or biomaterial factors to in vivo wear than those to patient and surgery related factors. Many retrieval studies just include revision implants and therefore may not be representative. This study is aimed to correlate patient- and surgery- related factors to visual wear score by minimizing design influence and include both autopsy and revision implants. Comparison between the groups was expected to unmask patient and surgery-related factors responsible for wear.</p> <p>Methods</p> <p>The amount of joint side wear on polyethylene retrievals was measured using a modification of an established visual wear score. Fatigue type wear was defined as summation of the most severe wear modes of delamination, pitting and cracks. Analysis of patient and surgery related variables suspicious to cause wear included prospectively sampled patient activity which was measured by self reported walking capacity. Statistical analysis was done by univariate analysis of variance. Activity level and implantation time were merged to an index of use and correlated to the wear score.</p> <p>Results</p> <p>Wear score after comparable implantation time was significantly less in the autopsy group. Even so, fatigue type wear accounted for 84 and 93 % of total wear score on autopsy and revision implants respectively. A highly significant influence on wear score was found in time of implantation (p = 0.002), level of activity (p = 0.025) and inserts belonging to revision group (p = 0.006). No influence was found for the kind of patella replacement (p = 0.483). Body mass index and accuracy of component alignment had no significant influence on visual wear score. Fatigue-type wear in the medial compartment was closely correlated to the index of use in the autopsy (R²= 0.383) and the revision group (R²= 0.813).</p> <p>Conclusion</p> <p>The present study's finding of substantial fatigue type wear in both autopsy and revision retrievals supports the theory that polyethylene fatigue strength is generally exceeded in this type of prosthesis. Furthermore, this study correlated fatigue-type polyethylene wear to an index of use as calculated by activity over time. Future retrieval studies may use activity over time as an important patient related factor correlated to the visual wear score. When evaluating total knee arthroplasty routine follow up, the surgeon must think of substantial wear present even without major clinical signs.</p

Exploring types of focused factories in hospital care: a multiple case study

Background: Focusing on specific treatments or diseases is proposed as a way to increase the efficiency of hospital care. The definition of "focus" or "focused factory", however, lacks clarity. Examples in health care literature relate to very different organizations.\ud Our aim was to explore the application of the focused factory concept in hospital care, including an indication of its performance, resulting in a conceptual framework that can be helpful in further identifying different types of focused factories. Thus contributing to the understanding of the diversity of examples found in the literature. - \ud \ud Methods: We conducted a cross-case comparison of four multiple-case studies into hospital care. To cover a broad array of focus, different specialty fields were selected. Each study investigated the organizational context, the degree of focus, and the operational performance. Focus was measured using an instrument translated from industry. Data were collected using both qualitative and quantitative methods and included site visits. A descriptive analysis was performed at the case study and cross-case studies level. - \ud \ud Results: The operational performance per specialty field varied considerably, even when cases showed comparable degrees of focus. Cross-case comparison showed three focus domains. The product domain considered specialty based focused factories that treated patients for a single-specialty, but did not pursue a specific strategy nor adapted work-designs or layouts. The process domain considered delivery based focused factories that treated multiple groups of patients and often pursued strategies to improve efficiency and timeliness and adapted work-designs and physical layouts to minimize delays. The product-process domain considered procedure based focused factories that treated a single well-defined group of patients offering one type of treatment. The strategic focusing decisions and the design of the care delivery system appeared especially important for delivery and procedure based focused factories. - \ud \ud Conclusions: Focus in hospital care relates to limitations on the patient group treated and the range of services offered. Based on these two dimensions, we identified three types of focused factories: specialty based, delivery based, and procedure based. Focus could lead to better operational performance, but only when clear strategic focusing decisions are made