The Claims Culture: A Taxonomy of Industry Attitudes

This paper presents an analysis of a familiar aspect of construction industry culture that we have dubbed 'the claims culture'. This is a culture of contract administration that lays a strong emphasis on the planning and management of claims. The principal elements of the analysis are two sets of distinctions. The first comprises economic and occupational orders, referring to two kinds of control that are exercised over the construction process; predicated respectively on economic ownership and occupational competence. The second refers to contrasting attitudes towards relationships and problem solving within these orders: respectively 'distributive' and 'integrative'. The concepts of economic and occupational order entail further sub-categories. The various attitudes associated with these categories and sub-categories are described. They are assessed as to their consequences for change initiatives in the industry

Using the forces of hydrodynamic countercurrent chromatography for the study of bacteriophages

Bacteriophages (phages) are viruses that target bacteria, with the ability to lyse and kill host bacterial cells. Due to this, they have been of some interest as a therapeutic since their discovery in the early 1900s, but with the recent increase in antibiotic resistance, phages have seen a resurgence in attention. Current methods of isolation and purification of phages can be long and tedious, with caesium chloride concentration gradients the gold standard for purifying a phage fraction. Isolation of novel phages requires centrifugation and ultrafiltration of mixed samples, such as water sources, effluent or faecal samples etc, to prepare phage filtrates for further testing. We propose countercurrent chromatography as a novel and alternative approach to use when studying phages, as a scalable and high-yield method for obtaining phage fractions. However, the full extent of the usefulness and resolution of separation with this technique has not been researched; it requires optimization and ample testing before this can be revealed. Here we present an initial study to determine survivability of two phages, T4 and ϕX174, using only water as a mobile phase in a Spectrum Series 20 HPCCC. Both phages were found to remain active once eluted from the column. Phages do not fully elute from the column and sodium hydroxide is necessary to flush the column between runs to deactivate remaining phages

Away Then to the Mountains

The hunter dreads no danger,While a long the steep locks wending;From youth a mountain ranger,With the wind and snow contending.From the peak he looks on the valley brooks,While his heart for home is bounding;And he marks the maid on the valley glade, Who lists to his wild horn sounding.way then to the &c, &c. The way then to the mountains,While the morning sun is shining;The mist has left the fountain,And the herds in shade are reclining.Up the rocks we\u27ll climb to the top sublime,And we\u27ll watch the light deer bounding;While the sun wades through the sea of blue,And the alpine horn is sounding.A way then to the mountains, While the morning sun is shining;The mist has left the fountains, And the herds in shade are reclining

The duration-energy-size enigma for acoustic emission

Abstract: Acoustic emission (AE) measurements of avalanches in different systems, such as domain movements in ferroics or the collapse of voids in porous materials, cannot be compared with model predictions without a detailed analysis of the AE process. In particular, most AE experiments scale the avalanche energy E, maximum amplitude Amax and duration D as E ~ Amaxx and Amax ~ Dχ with x = 2 and a poorly defined power law distribution for the duration. In contrast, simple mean field theory (MFT) predicts that x = 3 and χ = 2. The disagreement is due to details of the AE measurements: the initial acoustic strain signal of an avalanche is modified by the propagation of the acoustic wave, which is then measured by the detector. We demonstrate, by simple model simulations, that typical avalanches follow the observed AE results with x = 2 and ‘half-moon’ shapes for the cross-correlation. Furthermore, the size S of an avalanche does not always scale as the square of the maximum AE avalanche amplitude Amax as predicted by MFT but scales linearly S ~ Amax. We propose that the AE rise time reflects the atomistic avalanche time profile better than the duration of the AE signal

The duration-energy-size enigma for acoustic emission

Abstract: Acoustic emission (AE) measurements of avalanches in different systems, such as domain movements in ferroics or the collapse of voids in porous materials, cannot be compared with model predictions without a detailed analysis of the AE process. In particular, most AE experiments scale the avalanche energy E, maximum amplitude Amax and duration D as E ~ Amaxx and Amax ~ Dχ with x = 2 and a poorly defined power law distribution for the duration. In contrast, simple mean field theory (MFT) predicts that x = 3 and χ = 2. The disagreement is due to details of the AE measurements: the initial acoustic strain signal of an avalanche is modified by the propagation of the acoustic wave, which is then measured by the detector. We demonstrate, by simple model simulations, that typical avalanches follow the observed AE results with x = 2 and ‘half-moon’ shapes for the cross-correlation. Furthermore, the size S of an avalanche does not always scale as the square of the maximum AE avalanche amplitude Amax as predicted by MFT but scales linearly S ~ Amax. We propose that the AE rise time reflects the atomistic avalanche time profile better than the duration of the AE signal

Models and metaphors: complexity theory and through-life management in the built environment

Complexity thinking may have both modelling and metaphorical applications in the through-life management of the built environment. These two distinct approaches are examined and compared. In the first instance, some of the sources of complexity in the design, construction and maintenance of the built environment are identified. The metaphorical use of complexity in management thinking and its application in the built environment are briefly examined. This is followed by an exploration of modelling techniques relevant to built environment concerns. Non-linear and complex mathematical techniques such as fuzzy logic, cellular automata and attractors, may be applicable to their analysis. Existing software tools are identified and examples of successful built environment applications of complexity modelling are given. Some issues that arise include the definition of phenomena in a mathematically usable way, the functionality of available software and the possibility of going beyond representational modelling. Further questions arising from the application of complexity thinking are discussed, including the possibilities for confusion that arise from the use of metaphor. The metaphor of a 'commentary machine' is suggested as a possible way forward and it is suggested that an appropriate linguistic analysis can in certain situations reduce perceived complexity

Retail Price and Point of Sale Display of Tobacco in the UK: A Descriptive Study of Small Retailers

Background: Since the implementation of the 2002 Tobacco Advertising and Promotion Act, point-of-sale (PoS) tobacco displays are one of few remaining means of communication between the tobacco industry and customers in the UK. This study aimed to explore the characteristics of tobacco displays in a UK city, and particularly to assess the tobacco prices and promotional offers, types and pack sizes on display. Methods: Digital pictures of PoS displays were taken in 117 small retail shops in Nottingham in mid 2010. Data were analysed using Windows Photo Gallery software and SPSS version 16. Results: Just over half (52%) of cigarette packs on display were packs of 20, and 43 % packs of 10. Cigarette prices differed substantially between brands, ranging from £4.19 to £6.85 for 20-packs, and from £2.12 to £3.59 for 10-packs. Forty four percent of cigarette packs and 40 % of RYO (Roll-Your-Own) tobacco pouches, almost exclusively lower priced brands, were displayed with a pricemark, implying a promotional price offer. Eighty percent of 20-pack cigarette brand or brand variants on sale were priced below the EU-defined Most Popular Price Category (MPPC) for the UK in 2010; 45 % were priced below the Weighted Average Price (WAP), which replaced the MPPC in 2011. Conclusion: PoS displays communicate value by displaying a high proportion of lower cost brands, and smaller and hence lower-cost packs, and by displaying price discounts on packs. The MPPC substantially overestimated the prices at whic

Evidence of clonal budding in a radial cluster of Paraconularia crustula (White) (Pennsylvanian: ?Cnidaria)

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73153/1/j.1502-3931.1992.tb01645.x.pd

Piston ring oil film thickness measurements in a four-stroke diesel engine during steady-state, start-up and shut-down

Internal combustion engine research predominantly focuses on routes to lower emissions to meet various emission legislation. Lower emissions can be achieved with increased fuel efficiency and less lubricant throw off/lubricant combustion in the piston ring zone. These are all dependent on the oil film that forms between the liner and piston components. This article details the use of ultrasonic sensors to study the lubricant film thickness between the engine liner and piston rings/skirt in a fired diesel two-cylinder YTR engine. The testing regime covered a series of engine speeds and loading levels and found the minimum oil film thickness to vary from 1 to 3.5 μm. Spectrograms (time-varying ultrasonic amplitude spectra) have shown a residual oil film on the liner, first present after the skirt moves above the sensor that peaks at 440 μm, which then dissipates until the next oil control ring passage. Start-up and shut-down captures have visualised the build-up and reduction of the film thickness, in which during start-up typically a 2-s interval between the first ring passage and a consistent film thickness was seen. Whilst the shut-down tests showed a lesser variation, anticipated to be due to the oil pump already operating and is, therefore, less subjective to a reduction in engine speed providing a threshold of oil remains on the liner. Measurements like this help to describe how lubrication occurs in the piston ring zone and hence can optimise component design and an oil injection schedule