Interactions between wear and corrosion on cast and sintered Ti-12Nb alloy in comparison with the commercial Ti-6Al-4V alloy

This work investigates the corrosion and tribocorrosion behavior of alpha + beta Ti-12Nb alloy processed by casting and sintering, in 9 g/l NaCl solution at body temperature, and compares the results with the commercial Ti-6Al-4 V alloy. Different electrochemical techniques were used to access the corrosion behavior. Tribocorrosion behavior was studied at open circuit potential under continuous and intermittent sliding, and at anodic potentiostatic condition under continuous sliding. Results revealed that Ti-12Nb alloys presented similar tribocorrosion behavior although the sintered one exhibited a better corrosion behavior. Nevertheless, Ti-6Al-4 V presented better overall degradation resistance than both Ti-12Nb alloys.- This work was supported by FCT national funds, under the national support to R&D units grant, through the reference project UIDB/04436/2020 and UIDP/04436/2020, together with M-ERA-NET/0001/2015, and co-supported by Brazilian agencies CNPq [grants #308.204/2017-4 and #125.954/2018-2] and FAPESP M-ERA-NET [grant #2015/50.280-5], also by MINECO (Spain) through the program PCIN-2016-123 and the Ramon y Cajal project RYC-2014-15014. I. Caha is grateful for a PhD grant under the NORTE-08-5369-FSE-000012 project

International nosocomial infection control consortium (INICC) report, data summary of 36 countries, for 2004-2009

The results of a surveillance study conducted by the International Nosocomial Infection Control Consortium (INICC) from January 2004 through December 2009 in 422 intensive care units (ICUs) of 36 countries in Latin America, Asia, Africa, and Europe are reported. During the 6-year study period, using Centers for Disease Control and Prevention (CDC) National Healthcare Safety Network (NHSN; formerly the National Nosocomial Infection Surveillance system [NNIS]) definitions for device-associated health care-associated infections, we gathered prospective data from 313,008 patients hospitalized in the consortium's ICUs for an aggregate of 2,194,897 ICU bed-days. Despite the fact that the use of devices in the developing countries' ICUs was remarkably similar to that reported in US ICUs in the CDC's NHSN, rates of device-associated nosocomial infection were significantly higher in the ICUs of the INICC hospitals; the pooled rate of central line-associated bloodstream infection in the INICC ICUs of 6.8 per 1,000 central line-days was more than 3-fold higher than the 2.0 per 1,000 central line-days reported in comparable US ICUs. The overall rate of ventilator-associated pneumonia also was far higher (15.8 vs 3.3 per 1,000 ventilator-days), as was the rate of catheter-associated urinary tract infection (6.3 vs. 3.3 per 1,000 catheter-days). Notably, the frequencies of resistance of Pseudomonas aeruginosa isolates to imipenem (47.2% vs 23.0%), Klebsiella pneumoniae isolates to ceftazidime (76.3% vs 27.1%), Escherichia coli isolates to ceftazidime (66.7% vs 8.1%), Staphylococcus aureus isolates to methicillin (84.4% vs 56.8%), were also higher in the consortium's ICUs, and the crude unadjusted excess mortalities of device-related infections ranged from 7.3% (for catheter-associated urinary tract infection) to 15.2% (for ventilator-associated pneumonia). Copyright © 2012 by the Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved

Digestibility studies in rainbow trout (Oncorhynchus mykiss)

SIGLEAvailable from British Library Document Supply Centre- DSC:D179611 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Machining of Hybrid Composite Materials

Composite materials have been having an increasing importance in the industry. Their high specific properties and their high flexibility that allows tailoring materials that suit the needs of practically every project, have been leading to a growth in the demand of this kind of materials. Fiber-Metal Laminates have an established usage on the aeronautic industry and lately have been subject of research by the automotive industry.  Since composite manufacturing methods allow the obtention of components with their final geometry, drilling is the most used machining operation in the machining of composites. Drilling of composites is very demanding from the tools point of view, with very high wear rates and several defects can occur to the workpiece like delamination, fiber pull-outs, burrs and matrix degradation. When combined with a metal, additional challenges appear in drilling these materials such as loads of different magnitudes during a single operation and surface defects on the interface because of chip removal. Orbital drilling is seen as a promising alternative to conventional drilling, presenting several advantages that result in holes with higher quality.  Given the interest the automotive industry has been showing in fiber-metal laminates constituted by steel and carbon fiber reinforced plastics (CFRP) and due to the lack of information regarding drilling of this combination of materials, the aim of this work was to evaluate the influence of the machining parameters in the quality of holes obtained by orbital drilling. A full factorial design of experiments was done and the influence of the parameters was then evaluated by means of an Analysis of Variance (ANOVA).&nbsp

Pesquisa de Yersinia pestis em roedores e outros pequenos mamíferos nos focos pestosos do Nordeste do Brasil no período 1966 a 1982 Detection of Yersinia pestis in rodents and other small mammals in the northeast of Brazil during the period from 1966 to 1982

Foi feita análise da metodologia empregada e dos resultados alcançados em pesquisa de Yersinia pestis, em material de 24.703 roedores e outros pequenos mamíferos oriundos dos focos pestosos do Nordeste do Brasil, no período de 1966 a 1982. Concluiu-se ser necessário haver maior rapidez na realização dos exames para que os dados obtidos sejam convenientemente aplicados nas atividades de vigilância e controle da peste.<br>The analysis of the methods employed and the results obtained in the research into Yersinia pestis in 24.703 rodents and other small mammals from plague foci in the Northeast of Brazil during the period from 1966 to 1982, shows that the examinations should be carried out more guickly, to make prompter use of the data obtained in the activities of plague surveillance and control possible