751 research outputs found
Pollutant emissions in common-rail diesel engines in extraurban cycle: rapeseed oils vs diesel fuel
The new energy strategy of EU (i.e., Directive 2009/28/EC) requires increasing the use of biofuels in transports up to
at least 10% of the total fuel consumption. In the last years, the share of Diesel engines in automotive applications
reached about 55% in EU market, thus trying to widen the alternatives to Diesel fuel is very important. In this
framework straight vegetable oils (SVO) can represent one of the available possibilities at least in some specific
applications (i.e., public transportation, hybrid or marine propulsion, etc.). SVO properties may be very different
form Diesel fuel, thus operating a Diesel engine with SVO might result in some problems, especially in automotive
configuration where the electronic unit acts as if it is working with Diesel fuel. This reflects in possible engine power
and torque reduction, maintenance problems, and pollutant emissions during vehicles running. The latter aspect is the
focus of the present paper. In this work, we used a turbocharged, four stroke, four cylinders, water cooled, commonrail
multijet Diesel engine in automotive configuration to simulate the extraurban cycle according to the EU standard,
comparing pollutant emissions in case of SVO and gasoil fuelling
Payloads development for European land mobile satellites: A technical and economical assessment
The European Space Agency (ESA) has defined two payloads for Mobile Communication; one payload is for pre-operational use, the European Land Mobile System (EMS), and one payload is for promoting the development of technologies for future mobile communication systems, the L-band Land Mobile Payload (LLM). A summary of the two payloads and a description of their capabilities is provided. Additionally, an economic assessment of the potential mobile communication market in Europe is provided
Investigations on diurnal and seasonal variations of Schumann resonance intensities in the auroral region
Measurements of the magnetic component of the Schumann resonance in the frequency range 6-14 Hz were performed
at high latitude location (TNB Antarctica; geographic coordinates: 74.7°S, 164.1°E; geomagnetic coordinates:
80.0°S, 307.7°E; LT=UT+13; MLT=UT8; altitude=28 m a.s.l.), during the two years 1996-1997. TNB
is a particularly important observation site located in a region characterised by a high electromagnetic activity in the
ELF and VLF bands. Moreover its remote location in Antarctica provides the important advantage that electromagnetic
background noise is not corrupted by anthropogenic noise and that the continental lightning activity is very low.
The combination of low additional anthropogenic electromagnetic radiation and low atmospheric noise in this area
allows detailed investigations into wave generation and amplification in the polar ionosphere and magnetosphere not
possible anywhere else in the world. This paper reports the study of the magnetic power of the 8 Hz Schumann resonance
mode. For both the years considered diurnal and long-term seasonal variations were observed
Investigations on diurnal and seasonal variations of Schumann resonance intensities in the auroral region
Measurements of the magnetic component of the Schumann resonance in the frequency range 6-14 Hz were performed
at high latitude location (TNB Antarctica; geographic coordinates: 74.7°S, 164.1°E; geomagnetic coordinates:
80.0°S, 307.7°E; LT=UT+13; MLT=UT–8; altitude=28 m a.s.l.), during the two years 1996-1997. TNB
is a particularly important observation site located in a region characterised by a high electromagnetic activity in the
ELF and VLF bands. Moreover its remote location in Antarctica provides the important advantage that electromagnetic
background noise is not corrupted by anthropogenic noise and that the continental lightning activity is very low.
The combination of low additional anthropogenic electromagnetic radiation and low atmospheric noise in this area
allows detailed investigations into wave generation and amplification in the polar ionosphere and magnetosphere not
possible anywhere else in the world. This paper reports the study of the magnetic power of the 8 Hz Schumann resonance
mode. For both the years considered diurnal and long-term seasonal variations were observed
Rain erosion numerical modeling applied to multi-MW off-shore wind turbine
In this work, the authors present a numerical prediction of erosion on two different
blade geometry of a 6 MW HAWT designed for different aerodynamic loading, with the aim of studying
their sensitiveness to erosion.
First, the fully 3D simulations are performed using an Euler-Lagrangian approach. Flow field
simulations are carried out with the open-source code OpenFOAM, based on a finite
volume approach, using Multiple Reference Frame methodology. Reynolds Averaged Navier- Stokes
equations for incompressible flow were solved with a k-ε turbulence model.
An in-house code (P-Track) is used to compute the rain drops transport and dispersion,
adopting the Particle Cloud Tracking approach (PCT). The PCT was used by some of the
authors in previous works (Corsini et al., 2012; Corsini et al., 2014) to predict erosion on both
axial and centrifugal fans, obtaining satisfactory results. The PCT allows to simulate a huge
number of transported phase tracking just few cloud trajectories, thus resulting in reduction of
computational time comparing with single particle tracking approach.
Erosion is modelled accounting for the main quantities affecting the phenomenon, which is impact
velocity and angle, and material properties of the target surface.
Results provide the regions of the two blades more sensitive to erosion, and the effect of
the blade geometry on erosion attitude
Variational control approach to energy extraction from a fluid flow
Energy harvesting from the environment is an important aspect of many technologies. The scale of energy capturing and storage can involve the power range from mWatt up to MWatt, depending on the used devices and the considered environments (from ambient acoustic and vibration to ocean wave motion, or wind). In this paper, the wind turbine energy harvesting problem is approached as an optimal control problem, where the objective function is the absorption of an amount of energy in a given time interval by a fluid-flow environment, that should be maximized. The interest relies on outlining general control models of fluid-flow-based extraction plants and identifying an optimum strategy for the regulation of an electrical machine to obtain a maximum-efficiency process for the related energy storage. The mathematical tools are found in the light of optimal control theory, where solutions to the fundamental equations are in the frame of Variational Control (the basis of the Pontryagin optimal control theory). A special problem, named Optimally Controlled Betz’s Machine OCBM-optimal control steady wind turbine, is solved in closed form, and it is shown that, in the simpler steady case, it reproduces the maximum efficiency machine developed in Betz’s theory
Rain erosion numerical modeling applied to multi-MW off-shore wind turbine
In this work, the authors present a numerical prediction of erosion on two different
blade geometry of a 6 MW HAWT designed for different aerodynamic loading, with the aim of studying
their sensitiveness to erosion.
First, the fully 3D simulations are performed using an Euler-Lagrangian approach. Flow field
simulations are carried out with the open-source code OpenFOAM, based on a finite
volume approach, using Multiple Reference Frame methodology. Reynolds Averaged Navier- Stokes
equations for incompressible flow were solved with a k-ε turbulence model.
An in-house code (P-Track) is used to compute the rain drops transport and dispersion,
adopting the Particle Cloud Tracking approach (PCT). The PCT was used by some of the
authors in previous works (Corsini et al., 2012; Corsini et al., 2014) to predict erosion on both
axial and centrifugal fans, obtaining satisfactory results. The PCT allows to simulate a huge
number of transported phase tracking just few cloud trajectories, thus resulting in reduction of
computational time comparing with single particle tracking approach.
Erosion is modelled accounting for the main quantities affecting the phenomenon, which is impact
velocity and angle, and material properties of the target surface.
Results provide the regions of the two blades more sensitive to erosion, and the effect of
the blade geometry on erosion attitude
Numerical study on active and passive trailing edge morphing applied to a multi-MW wind turbine section
A progressive increasing in turbine dimension has characterized the
technological evelopment in offshore wind energy utilization. This aspect reflects on
the growing in blade length and weight. For very large turbines, the standard control systems may
not be optimal to give the best performance and the best vibratory load damping, keeping the
condition of maximum energy production. For this reason, some new solutions have been
proposed in research. One of these is the possibility of morphs the blade surface in an active way
(increasing the performance in low wind region) or passive (load reduction) way.
In this work, we present a numerical study on the active and passive trailing edge
morphing, applied to large wind turbines. In particular, the study focuses on the aerodynamic
response of a midspan blade section, in terms of fluid structure interaction (FSI) and driven
surface deformation.
We test the active system in a simple start-up procedure and the passive system in a power
production with turbulent wind conditions, that is, two situations in which we expect these systems
could improve the performance.
All the computations are carried out with a FSI code, which couples a 2D-CFD solver, a moving mesh
solver (both implemented in OpenFOAM library) and a FEM solver.
We evaluate all the boundary conditions to apply in the section problem by simulating the
5MW NREL wind turbine with the NREL CAE-tools developed for wind turbine simulation
Vegetable Oils as Fuels in Diesel Engine. Engine Performance and Emissions
AbstractThe EU new energy strategy represents a challenge and a boost for industries and researchers pushing them to find new solutions to supply the energy demand complying with new environmental requests. The transport sector is one of the most addicted to oil product and then pollutant. A new bio-fuels generation is being studied, but the use of the ones already available should be increased. The use of vegetable oils (VO) and waste cooking oils (WCO) could represent interesting alternative fuels for Diesel engines in some specific applications (i.e., public transportation, hybrid or marine propulsion, etc.). Moreover, VO can be produced almost everywhere in the world in relatively small plants, and WCO would represent the use of a waste material which otherwise should be disposed. However, operating a Diesel engine (DE) with a different fuel might results in some problems. Indeed VO and WCO have different characteristics compared to Diesel fuel (i.e, a smaller heating value, a larger density and viscosity), and this can affect the operation of a DE. In particular the DE is expected to have some problem at the injection system and power loss.In this work different vegetable oils (both straight and waste) are used to fuel a DE in automotive configuration and study its behavior. Tests are performed using a turbocharged, four stroke, four cylinders, water cooled, common-rail multijet DE. The influence of fuel used on engine power, specific consumption, efficiency, and exhaust opacity, are compared with those obtained fuelling with Diesel fuel
- …