2,111 research outputs found
Failure analysis of a tool steel torque shaft
A low design load drive shaft used to deliver power from an experimental exhaust heat recovery system to the crankshaft of an experimental diesel truck engine failed during highway testing. An independent testing laboratory analyzed the failure by routine metallography and attributed the failure to fatigue induced by a banded microstructure. Visual examination by NASA of the failed shaft plus the knowledge of the torsional load that it carried pointed to a 100 percent ductile failure with no evidence of fatigue. Scanning electron microscopy confirmed this. Torsional test specimens were produced from pieces of the failed shaft and torsional overload testing produced identical failures to that which had occurred in the truck engine. This pointed to a failure caused by a high overload and although the microstructure was defective it was not the cause of the failure
All Hands on Deck: Collaborative Global Strategies in the Battle Against Corruption and Human Trafficking in Africa
Quality Audit in the Fastener Industry
Both the financial and quality communities rely on audits to verify customers records. The financial community is highly structured around three categories of risk, INHERENT RISK, CONTROL RISK, and DETECTION RISK. Combined, the product of these three categories constitute the AUDIT RISK. The financial community establishes CONTROL RISK based in large part on a systems level understanding of the process flow. This system level understanding is best expressed in a flowchart. The quality community may be able to adopt this structure and thereby reduce cost while maintaining and enhancing quality. The quality community should attempt to flowchart the systems level quality process before beginning substantive testing. This theory needs to be applied in several trial cases to prove or disprove this hypothesi
Decoupling Extreme Programming From Byzantine Fault Tolerance in Multicast Algorithms
Unified embedded archetypes have led to many practical advances, including fiber-optic cables and Internet QoS. In fact, few biologists would disagree with the simulation of agents, demonstrates the significant importance of machine learning. Kapia, our new heuristic for the con- struction of extreme programming, is the solution to all of these problems
Strategi Positioning Slank Dalam Menanamkan Citra Sebagai Salah Satu Grup Band Di Indonesia
 Abstract: This research is aimed to analyze the positioning strategy of music group band, the Slank, that still now can exist in Indonesia.The Slank is offering some differentiation that can be identified, offering an unique selling proposition (USP) that can be differentiate among their competitors. Some several findings in the research are: the Slank delivers a tagline “polos dan apa adanya†(means innocent and just be yourself) which contains solid and clear messages to their audience. This message divulged in their overall activities including in how they communicate and promote to their audience. The message “polos dan apa adanya†have been emerging in various of a medium that Slank used to communicate, including music and the lyrics of the songs, video clips, their performances or life style in their daily activities, their cover and logo, Slank’s live show and Slank’s merchandises. From their lyrics of the Slank song titled Seperti Para Koruptor, the Slank gives a clear message to persuade the audiences to live with humble and just be ourselves because in the living world, happiness and peaceful is much more worthed instead of being rich and famous. With all that efforts, the Slank tries to place their image among their audience and trying to be unique and different. Positioning strategy that pertain to the Slank should be managed and controlled in order to surviving Slank among of the competitors
Synthesis and Conductivity Studies of Tetraarylphosphonium Salts As Potential Electrolytes in Advanced Batteries
The purpose of this study was to synthesize polysubstituted tetraarylphosphonium/tetrakis (pentafluorophenyl) borate salts 3, also known as TAPR/TFAB where R is a substituent, and to measure their conductance/conductivity in low-polarity media such as tetrahydrofuran (THF) and dichloromethane (DCM). Such determination was to provide a rationale to the question of whether these compounds, and other weakly coordinating cations/anions combinations are suitable electrolytes for advanced batteries which are energized in safer, low-polarity organic solvents
Interleukin-6 Interweaves the Bone Marrow Microenvironment, Bone Loss, and Multiple Myeloma
The immune system is strongly linked to the maintenance of healthy bone. Inflammatory cytokines, specifically, are crucial to skeletal homeostasis and any dysregulation can result in detrimental health complications. Interleukins, such as interleukin 6 (IL-6), act as osteoclast differentiation modulators and as such, must be carefully monitored and regulated. IL-6 encourages osteoclastogenesis when bound to progenitors and can cause excessive osteoclastic activity and osteolysis when overly abundant. Numerous bone diseases are tied to IL-6 overexpression, including rheumatoid arthritis, osteoporosis, and bone-metastatic cancers. In the latter, IL-6 can be released with growth factors into the bone marrow microenvironment (BMM) during osteolysis from bone matrix or from cancer cells and osteoblasts in an inflammatory response to cancer cells. Thus, IL-6 helps create an ideal microenvironment for oncogenesis and metastasis. Multiple myeloma (MM) is a blood cancer that homes to the BMM and is strongly tied to overexpression of IL-6 and bone loss. The roles of IL-6 in the progression of MM are discussed in this review, including roles in bone homing, cancer-associated bone loss, disease progression and drug resistance. MM disease progression often includes the development of drug-resistant clones, and patients commonly struggle with reoccurrence. As such, therapeutics that specifically target the microenvironment, rather than the cancer itself, are ideal and IL-6, and its myriad of downstream signaling partners, are model targets. Lastly, current and potential therapeutic interventions involving IL-6 and connected signaling molecules are discussed in this review
Government review of the Mod-2 wind turbine (as-built)
The findings and recommendations of the Government committee formed to conduct an as-built review of the three Mod-2 wind turbine units at Goldendale, Washington are given. The purpose of the review was to identify any critical deficiencies in machine components that could result in failure, and to recommend any necessary corrective action before resuming safe machine operation. The review concluded that one of the deficiencies identified would preclude planned attended or unattended operation, provided that certain corrective actions were implemented
Materials Science Research Rack Onboard the International Space Station
The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and ESA for materials science investigations on the International Space Station (ISS). MSRR was launched on STS-128 in August 2009 and currently resides in the U.S. Destiny Laboratory Module. Since that time, MSRR has logged more than 1000 hours of operating time. The MSRR accommodates advanced investigations in the microgravity environment on the ISS for basic materials science research in areas such as solidification of metals and alloys. The purpose is to advance the scientific understanding of materials processing as affected by microgravity and to gain insight into the physical behavior of materials processing. MSRR allows for the study of a variety of materials, including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. The NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA-developed Materials Science Laboratory (MSL) that accommodates interchangeable Furnace Inserts (FI). Two ESA-developed FIs are presently available on the ISS: the Low Gradient Furnace (LGF) and the Solidification and Quenching Furnace (SQF). Sample Cartridge Assemblies (SCAs), each containing one or more material samples, are installed in the FI by the crew and can be processed at temperatures up to 1400C. ESA continues to develop samples with 14 planned for launch and processing in the near future. Additionally NASA has begun developing SCAs to support US PIs and their partners. The first of these Flight SCAs are being developed for investigations to support research in the areas of crystal growth and liquid phase sintering. Subsequent investigations are in various stages of development. US investigations will include a ground test program in order to distinguish the particular effects of the absence of gravity
- …