Mechanisms of Spontaneous Current Generation in an Inhomogeneous d-Wave Superconductor

A boundary between two d-wave superconductors or an s-wave and a d-wave superconductor generally breaks time-reversal symmetry and can generate spontaneous currents due to proximity effect. On the other hand, surfaces and interfaces in d-wave superconductors can produce localized current-carrying states by supporting the T-breaking combination of dominant and subdominant order parameters. We investigate spontaneous currents in the presence of both mechanisms and show that at low temperature, counter-intuitively, the subdominant coupling decreases the amplitude of the spontaneous current due to proximity effect. Superscreening of spontaneous currents is demonstrated to be present in any d-d (but not s-d) junction and surface with d+id' order parameter symmetry. We show that this supercreening is the result of contributions from the local magnetic moment of the condensate to the spontaneous current.Comment: 4 pages, 5 figures, RevTe

Domain structure of bulk ferromagnetic crystals in applied fields near saturation

We investigate the ground state of a uniaxial ferromagnetic plate with perpendicular easy axis and subject to an applied magnetic field normal to the plate. Our interest is the asymptotic behavior of the energy in macroscopically large samples near the saturation field. We establish the scaling of the critical value of the applied field strength below saturation at which the ground state changes from the uniform to a branched domain magnetization pattern and the leading order scaling behavior of the minimal energy. Furthermore, we derive a reduced sharp-interface energy giving the precise asymptotic behavior of the minimal energy in macroscopically large plates under a physically reasonable assumption of small deviations of the magnetization from the easy axis away from domain walls. On the basis of the reduced energy, and by a formal asymptotic analysis near the transition, we derive the precise asymptotic values of the critical field strength at which non-trivial minimizers (either local or global) emerge. The non-trivial minimal energy scaling is achieved by magnetization patterns consisting of long slender needle-like domains of magnetization opposing the applied fieldComment: 38 pages, 7 figures, submitted to J. Nonlin. Sci

Striped periodic minimizers of a two-dimensional model for martensitic phase transitions

In this paper we consider a simplified two-dimensional scalar model for the formation of mesoscopic domain patterns in martensitic shape-memory alloys at the interface between a region occupied by the parent (austenite) phase and a region occupied by the product (martensite) phase, which can occur in two variants (twins). The model, first proposed by Kohn and Mueller, is defined by the following functional: $${\cal E}(u)=\beta||u(0,\cdot)||^2_{H^{1/2}([0,h])}+ \int_{0}^{L} dx \int_0^h dy \big(|u_x|^2 + \epsilon |u_{yy}| \big)$$ where $u:[0,L]\times[0,h]\to R$ is periodic in $y$ and $u_y=\pm 1$ almost everywhere. Conti proved that if $\beta\gtrsim\epsilon L/h^2$ then the minimal specific energy scales like $\sim \min\{(\epsilon\beta/L)^{1/2}, (\epsilon/L)^{2/3}\}$, as $(\epsilon/L)\to 0$. In the regime $(\epsilon\beta/L)^{1/2}\ll (\epsilon/L)^{2/3}$, we improve Conti's results, by computing exactly the minimal energy and by proving that minimizers are periodic one-dimensional sawtooth functions.Comment: 29 pages, 3 figure

Froth-like minimizers of a non local free energy functional with competing interactions

We investigate the ground and low energy states of a one dimensional non local free energy functional describing at a mean field level a spin system with both ferromagnetic and antiferromagnetic interactions. In particular, the antiferromagnetic interaction is assumed to have a range much larger than the ferromagnetic one. The competition between these two effects is expected to lead to the spontaneous emergence of a regular alternation of long intervals on which the spin profile is magnetized either up or down, with an oscillation scale intermediate between the range of the ferromagnetic and that of the antiferromagnetic interaction. In this sense, the optimal or quasi-optimal profiles are "froth-like": if seen on the scale of the antiferromagnetic potential they look neutral, but if seen at the microscope they actually consist of big bubbles of two different phases alternating among each other. In this paper we prove the validity of this picture, we compute the oscillation scale of the quasi-optimal profiles and we quantify their distance in norm from a reference periodic profile. The proof consists of two main steps: we first coarse grain the system on a scale intermediate between the range of the ferromagnetic potential and the expected optimal oscillation scale; in this way we reduce the original functional to an effective "sharp interface" one. Next, we study the latter by reflection positivity methods, which require as a key ingredient the exact locality of the short range term. Our proof has the conceptual interest of combining coarse graining with reflection positivity methods, an idea that is presumably useful in much more general contexts than the one studied here.Comment: 38 pages, 2 figure

Transformation elastodynamics and active exterior acoustic cloaking

This chapter consists of three parts. In the first part we recall the elastodynamic equations under coordinate transformations. The idea is to use coordinate transformations to manipulate waves propagating in an elastic material. Then we study the effect of transformations on a mass-spring network model. The transformed networks can be realized with "torque springs", which are introduced here and are springs with a force proportional to the displacement in a direction other than the direction of the spring terminals. Possible homogenizations of the transformed networks are presented, with potential applications to cloaking. In the second and third parts we present cloaking methods that are based on cancelling an incident field using active devices which are exterior to the cloaked region and that do not generate significant fields far away from the devices. In the second part, the exterior cloaking problem for the Laplace equation is reformulated as the problem of polynomial approximation of analytic functions. An explicit solution is given that allows to cloak larger objects at a fixed distance from the cloaking device, compared to previous explicit solutions. In the third part we consider the active exterior cloaking problem for the Helmholtz equation in 3D. Our method uses the Green's formula and an addition theorem for spherical outgoing waves to design devices that mimic the effect of the single and double layer potentials in Green's formula.Comment: Submitted as a chapter for the volume "Acoustic metamaterials: Negative refraction, imaging, lensing and cloaking", Craster and Guenneau ed., Springe

Enhancement of near-cloaking. Part II: the Helmholtz equation

The aim of this paper is to extend the method of improving cloaking structures in the conductivity to scattering problems. We construct very effective near-cloaking structures for the scattering problem at a fixed frequency. These new structures are, before using the transformation optics, layered structures and are designed so that their first scattering coefficients vanish. Inside the cloaking region, any target has near-zero scattering cross section for a band of frequencies. We analytically show that our new construction significantly enhances the cloaking effect for the Helmholtz equation.Comment: 16pages, 12 fugure

Modeling of complex oxide materials from the first principles: systematic applications to vanadates RVO3 with distorted perovskite structure

"Realistic modeling" is a new direction of electronic structure calculations, where the main emphasis is made on the construction of some effective low-energy model entirely within a first-principle framework. Ideally, it is a model in form, but with all the parameters derived rigorously, on the basis of first-principles electronic structure calculations. The method is especially suit for transition-metal oxides and other strongly correlated systems, whose electronic and magnetic properties are predetermined by the behavior of some limited number of states located near the Fermi level. After reviewing general ideas of realistic modeling, we will illustrate abilities of this approach on the wide series of vanadates RVO3 (R= La, Ce, Pr, Nd, Sm, Gd, Tb, Yb, and Y) with distorted perovskite structure. Particular attention will be paid to computational tools, which can be used for microscopic analysis of different spin and orbital states in the partially filled t2g-band. We will explicitly show how the lifting of the orbital degeneracy by the monoclinic distortion stabilizes C-type antiferromagnetic (AFM) state, which can be further transformed to the G-type AFM state by changing the crystal distortion from monoclinic to orthorhombic one. Two microscopic mechanisms of such a stabilization, associated with the one-electron crystal field and electron correlation interactions, are discussed. The flexibility of the orbital degrees of freedom is analyzed in terms of the magnetic-state dependence of interatomic magnetic interactions.Comment: 23 pages, 13 figure

Mathematical analysis of the two dimensional active exterior cloaking in the quasistatic regime

We design a device that generates fields canceling out a known probing field inside a region to be cloaked while generating very small fields far away from the device. The fields we consider satisfy the Laplace equation, but the approach remains valid in the quasistatic regime in a homogeneous medium. We start by relating the problem of designing an exterior cloak in the quasistatic regime to the classic problem of approximating a harmonic function with harmonic polynomials. An explicit polynomial solution to the problem was given earlier in [Phys. Rev. Lett. 103 (2009), 073901]. Here we show convergence of the device field to the field needed to perfectly cloak an object. The convergence region limits the size of the cloaked region, and the size and position of the device.Comment: submitted to Analysis and Mathematical Physic

Reduced partition function ratios of iron and oxygen in goethite

First-principles calculations based on the density functional theory (DFT) with or without the addition of a Hubbard U correction, are performed on goethite in order to determine the iron and oxygen reduced partition function ratios (β-factors). The calculated iron phonon density of states (pDOS), force constant and β-factor are compared with reevaluated experimental β-factors obtained from Nuclear Resonant Inelastic X-ray Scattering (NRIXS) measurements. The reappraisal of old experimental data is motivated by the erroneous previous interpretation of the low- and high-energy ends of the NRIXS spectrum of goethite and jarosite samples (Dauphas et al., 2012). Here the NRIXS data are analyzed using the SciPhon software that corrects for non-constant baseline. New NRIXS measurements also demonstrate the reproducibility of the results. Unlike for hematite and pyrite, a significant discrepancy remains between DFT, NRIXS and the existing Mössbauer-derived data. Calculations suggest a slight overestimation of the NRIXS signal possibly related to the baseline definition. The intrinsic features of the samples studied by NRIXS and Mössbauer spectroscopy may also contribute to the discrepancy (e.g., internal structural and/or chemical defects, microstructure, surface contribution). As for oxygen, DFT results indicate that goethite and hematite have similar β-factors, which suggests almost no fractionation between the two minerals at equilibrium