22,426 research outputs found
Effect of thermal cycling in a Mach 0.3 burner rig on properties and structure of directionally solidified gamma/gamma prime - delta eutectic
Tensile and stress rupture properties at 1040 C of a thermally cycled gamma/gamma prime - delta eutectic were essentially equivalent to the as-grown properties. Tensile strength and rupture life at 760 C appeared to decrease slightly by thermal cycling. Thermal cycling resulted in gamma prime coarsening and Widmanstatten delta precipitation in the gamma phase. An unidentified precipitate, presumably gamma prime, was observed within the delta phase. The eutectic alloy exhibited a high rate of oxidation-erosion weight loss during thermal cycling in the Mach 0.3 burner rig
Modification of a three-dimensional supersonic nozzle analysis and comparison with experimental data
A computer program previously developed to analyze three-dimensional supersonic nozzles by the method of characteristics has been modified to study less restrictive nozzle geometries and nonuniform inlet conditions. An example indicates that a one-dimensional calculation that uses an averaged initial profile may be significantly in error. A comparison between the analysis and the data from a three-dimensional experiment shows generally good agreement between the two
High Velocity Burner Rig Oxidation and Thermal Fatigue Behavior of Si3N4- and SiC Base Ceramics to 1370 Deg C
One SiC material and three Si3N4 materials including hot-pressed Si3N4 as a baseline were exposed in a Mach-1-gas-velocity burner rig simulating a turbine engine environment. Criteria for the materials selection were: potential for gas-turbine usage, near-net-shape fabricability and commercial/domestic availability. Cyclic exposures of test vanes up to 250 cycles (50 hr at temperature) were at leading-edge temperatures to 1370 C. Materials and batches were compared as to weight change, surface change, fluorescent penetrant inspection, and thermal fatigue behavior. Hot-pressed Si3N4 survived the test to 1370 C with slight weight losses. Two types of reaction-sintered Si3N4 displayed high weight gains and considerable weight-change variability, with one material exhibiting superior thermal fatigue behavior. A siliconized SiC showed slight weight gains, but considerable batch variability in thermal fatigue
Using permeable membranes to produce hydrogen and oxygen from water
Concept may make it profitable to obtain hydrogen fuel from water. Laboratory tests have demonstrated that method enables decomposition of water several orders of magnitude beyond equilibrium state where only small amounts of free hydrogen are present
Ordered Measurements of Permutationally-Symmetric Qubit Strings
We show that any sequence of measurements on a permutationally-symmetric
(pure or mixed) multi-qubit string leaves the unmeasured qubit substring also
permutationally-symmetric. In addition, we show that the measurement
probabilities for an arbitrary sequence of single-qubit measurements are
independent of how many unmeasured qubits have been lost prior to the
measurement. Our results are valuable for quantum information processing of
indistinguishable particles by post-selection, e.g. in cases where the results
of an experiment are discarded conditioned upon the occurrence of a given event
such as particle loss. Furthermore, our results are important for the design of
adaptive-measurement strategies, e.g. a series of measurements where for each
measurement instance, the measurement basis is chosen depending on prior
measurement results.Comment: 13 page
Throat stability-by pass systems to increase the stable airflow range of a Mach 2.5 inlet with 60-percent internal contraction
The results of an experimental investigation to increase the stable airflow range (without unstart) of a supersonic mixed-compression inlet are presented. Various stability bypass entrances were located on the cowl side of the inlet throat. The types of entrance were distributed porous (normal holes), forward-slanted slot, and distributed educated slots. A large stable airflow range was obtained for each entrance type if a constant pressure was maintained in the stability bypass plenum. The distributed porous entrance provided the largest stable airflow range. Inlet unstart angle of attack was unaffected by the entrances
Distributed porous throat stability bypass to increase the stable airflow range of a Mach 2.5 inlet with 60 percent internal contraction
The results of an experimental investigation to increase the stable airflow operating range of a supersonic, mixed-compression inlet with 60-percent internal contraction are presented. Various distributed-porous, throat stability-bypass entrance configurations were tested. In terms of diffuser-exit corrected airflow, a large inlet stable airflow range of about 25 percent was obtained with the optimum configuration if a constant pressure was maintained in the by-pass plenum. The location of the centerbody bleed region had a decided effect on the overall inlet performance. Limited unstart angle-of-attack data are presented
Distributed educated throat stability bypass to increase the stable airflow range of a Mach 2.5 inlet with 60-percent internal contraction
The results of an experimental investigation to increase the stable airflow operating range of a supersonic mixed-compression inlet are presented. A distributed educated throat stability-bypass entrance configuration was tested. In terms of diffuser-exit corrected airflow, a large inlet stable airflow range of about 16.1 percent was obtained if a constant pressure was maintained in the bypass plenum. Limited unstart angle of attack data are presented
Some symmetry classifications of hyperbolic vector evolution equations
Motivated by recent work on integrable flows of curves and 1+1 dimensional
sigma models, several O(N)-invariant classes of hyperbolic equations for an -component vector are considered. In each
class we find all scaling-homogeneous equations admitting a higher symmetry of
least possible scaling weight. Sigma model interpretations of these equations
are presented.Comment: Revision of published version, incorporating errata on geometric
aspects of the sigma model interpretations in the case of homogeneous space
- …