2,239 research outputs found
Monitoring atmospheric pollutants with a heterodyne radiometer transmitter-receiver
The presence of selected atmospheric pollutants can be determined by transmitting an infrared beam of proper wavelength through the atmosphere, and detecting the reflections of the transmitted beam with a heterodyne radiometer transmitter-receiver using part of the laser beam as a local oscillator. The particular pollutant and its absorption line strength to be measured are selected by the laser beam wave length. When the round-trip path for the light is known or measured, concentration can be determined. Since pressure (altitude) will affect the shape of the molecular absorption line of a pollutant, tuning the laser through a range of frequencies, which includes a part of the absorption line of the pollutant of interest, yields pollutant altitude data from which the altitude and altitude profile is determined
Laser-excited fluorescence for measuring atmospheric pollution
System measures amount of given pollutant at specific location. Infrared laser aimed at location has wavelength that will cause molecules of pollutant to fluoresce. Detector separates fluorescence from other radiation and measures its intensity to indicate concentration of pollutant
Atmospheric studies and applications with infrared heterodyne detection techniques
With the advent of stable, cw infrared lasers with moderate output power capabilities in the mid 1960's came the idea of using heterodyne detection, a mature radio frequency technique, in the infrared. This technique was first applied in radar and communications applications; however, it became apparent that infrared lasers and heterodyne detection techniques would be useful in a number of atmospheric measurement applications. The level to which these techniques are being put to use in field measurements is shown using two developed flight instruments as examples
Atmospheric correlation time measurements using coherent CO2 lidar
A pulsed TEA-CO2 lidar with coherent detection was used to measure the correlation time of backscatter from an ensemble of atmospheric aerosol particles which are illuminated by the pulsed radiation. The correlation time of the backscatter return signal is important in studies of atmospheric turbulence and its effects on optical propagation and backscatter. If the temporal coherence of the pulse is large enough, then the temporal coherence of the return signal is dominated by the turbulence and shear for a variety of interesting atmospheric conditions. Various techniques for correlation time measurement are discussed and evaluated
Spectrophone stabilized laser with line center offset frequency control
Continuous offset tuning of a frequency stabilized CW gas laser is achieved by using a spectrophone filled with the same gas as the laser for sensing a dither modulation, detecting a first or second derivative of the spectrophone output with a lock-in amplifier, the detected output of which is integrated, and applying the integrator output as a correction signal through a circuit which adds to the dither signal from an oscillator a dc offset that is adjusted with a potentiometer to a frequency offset from the absorption line center of the gas, but within the spectral linewidth of the gas. Tuning about that offset frequency is achieved by adding a dc value to the detected output of the dither modulation before integration using a potentiometer
Digital control of diode laser for atmospheric spectroscopy
A system is described for remote absorption spectroscopy of trace species using a diode laser tunable over a useful spectral region of 50 to 200 cm(-1) by control of diode laser temperature over range from 15 K to 100 K, and tunable over a smaller region of typically 0.1 to 10 cm(-1) by control of the diode laser current over a range from 0 to 2 amps. Diode laser temperature and current set points are transmitted to the instrument in digital form and stored in memory for retrieval under control of a microprocessor during measurements. The laser diode current is determined by a digital to analog converter through a field effect transistor for a high degree of ambient temperature stability, while the laser diode temperature is determined by set points entered into a digital to analog converter under control of the microprocessor. Temperature of the laser diode is sensed by a sensor diode to provide negative feedback to the temperature control circuit that responds to the temperature control digital to analog converter
All-Sky spectrally matched UBVRI-ZY and u'g'r'i'z' magnitudes for stars in the Tycho2 catalog
We present fitted UBVRI-ZY and u'g'r'i'z' magnitudes, spectral types and
distances for 2.4M stars, derived from synthetic photometry of a library
spectrum that best matches the Tycho2 BtVt, NOMAD Rn and 2MASS JHK_{2/S}
catalog magnitudes. We present similarly synthesized multi-filter magnitudes,
types and distances for 4.8M stars with 2MASS and SDSS photometry to g<16
within the Sloan survey region, for Landolt and Sloan primary standards, and
for Sloan Northern (PT) and Southern secondary standards.
The synthetic magnitude zeropoints for BtVt, UBVRI, ZvYv, JHK_{2/S},
JHK_{MKO}, Stromgren uvby, Sloan u'g'r'i'z' and ugriz are calibrated on 20
calspec spectrophotometric standards. The UBVRI and ugriz zeropoints have
dispersions of 1--3%, for standards covering a range of color from -0.3 < V-I <
4.6; those for other filters are in the range 2--5%.
The spectrally matched fits to Tycho2 stars provide estimated 1-sigma errors
per star of ~0.2, 0.15, 0.12, 0.10 and 0.08 mags respectively in either UBVRI
or u'g'r'i'z'; those for at least 70% of the SDSS survey region to g<16 have
estimated 1-sigma errors per star of ~0.2, 0.06, 0.04, 0.04, 0.05 in u'g'r'i'z'
or UBVRI.
The density of Tycho2 stars, averaging about 60 stars per square degree,
provides sufficient stars to enable automatic flux calibrations for most
digital images with fields of view of 0.5 degree or more. Using several such
standards per field, automatic flux calibration can be achieved to a few
percent in any filter, at any airmass, in most workable observing conditions,
to facilitate inter-comparison of data from different sites, telescopes and
instruments.Comment: 36 pages, 30 figures, 3 printed tables, several electronic tables,
accepted PASP Dec 201
OT 060420: A Seemingly Optical Transient Recorded by All-Sky Cameras
We report on a ~5th magnitude flash detected for approximately 10 minutes by
two CONCAM all-sky cameras located in Cerro Pachon - Chile and La Palma -
Spain. A third all-sky camera, located in Cerro Paranal - Chile did not detect
the flash, and therefore the authors of this paper suggest that the flash was a
series of cosmic-ray hits, meteors, or satellite glints. Another proposed
hypothesis is that the flash was an astronomical transient with variable
luminosity. In this paper we discuss bright optical transient detection using
fish-eye all-sky monitors, analyze the apparently false-positive optical
transient, and propose possible causes to false optical transient detection in
all-sky cameras.Comment: 7 figures, 3 tables, accepted PAS
- …