25,235 research outputs found
Magnetic and electron transport properties of the rare-earth cobaltates, La0.7-xLnxCa0.3CoO3 (Ln = Pr, Nd, Gd and Dy) : A case of phase separation
Magnetic and electrical properties of four series of rare earth cobaltates of
the formula La0.7-xLnxCa0.3CoO3 with Ln = Pr, Nd, Gd and Dy have been
investigated. Compositions close to x = 0.0 contain large ferromagnetic
clusters or domains, and show Brillouin-like behaviour of the field-cooled DC
magnetization data with fairly high ferromagnetic Tc values, besides low
electrical resistivities with near-zero temperature coefficients. The
zero-field-cooled data generally show a non-monotonic behaviour with a peak at
a temperatures slightly lower than Tc. The near x = 0.0 compositions show a
prominent peak corresponding to the Tc in the AC-susceptibility data. The
ferromagnetic Tc varies linearly with x or the average radius of the A-site
cations, (rA). With increase in x or decrease in (rA), the magnetization value
at any given temperature decreases markedly and the AC-susceptibility
measurements show a prominent transition arising from small magnetic clusters
with some characteristics of a spin-glass. Electrical resistivity increases
with increase in x, showed a significant increase around a critical value of x
or (rA), at which composition the small clusters also begin to dominate. These
properties can be understood in terms of a phase separation scenario wherein
large magnetic clusters give way to smaller ones with increase in x, with both
types of clusters being present in certain compositions. The changes in
magnetic and electrical properties occur parallely since the large
ferromagnetic clusters are hole-rich and the small clusters are hole-poor.
Variable-range hopping seems to occur at low temperatures in these cobaltates.Comment: 23 pages including figure
Electronic phase separation in the rare earth manganates, (La1-xLnx)0.7Ca0.3MnO3 (Ln = Nd, Gd and Y)
All the three series of manganates showsaturation magnetization
characteristic of ferromagnetism, with the ferromagnetic Tc decreasing with
increasing in x up to a critical value of x, xc (xc = 0.6, 0.3, 0.2
respectively for Nd, Gd, Y). For x > xc, the magnetic moments are considerably
smaller showing a small increase around TM, the value of TM decreasing slightly
with increase in x or decrease in . The ferromagnetic compositions (x xc)
show insulator-metal (IM) transitions, while the compositions with x > xc are
insulating. The magnetic and electrical resistivity behavior of these
manganates is consistent with the occurrence of phase separation in the
compositions around xc, corresponding to a critical average radius of the
A-site cation, , of 1.18 A. Both Tc and TIM increase linearly when < rA
> > or x xc as expected of a homogenous ferromagnetic phase. Both Tc
and TM decrease linearly with the A-site cation size disorder at the A-site as
measured by the variance s2. Thus, an increase in s2 favors the insulating AFM
state. Percolative conduction is observed in the compositions with > <
rAc >. Electron transport properties in the insulating regime for x > xc
conforms to the variable range hopping mechanism. More interestingly, when x >
xc, the real part of dielectric constant (e') reaches a high value (104-106) at
ordinary temperatures dropping to a very small (~500) value below a certain
temperature, the value of which decreases with decreasing frequency.Comment: 27 pages; 11 figures, Submitted to J.Phys:Condens Matte
Magnetic properties of strongly disordered electronic systems
We present a unified, global perspective on the magnetic properties of
strongly disordered electronic systems, with special emphasis on the case where
the ground state is metallic. We review the arguments for the instability of
the disordered Fermi liquid state towards the formation of local magnetic
moments, and argue that their singular low temperature thermodynamics are the
``quantum Griffiths'' precursors of the quantum phase transition to a metallic
spin glass; the local moment formation is therefore not directly related to the
metal-insulator transition. We also review the the mean-field theory of the
disordered Fermi liquid to metallic spin glass transition and describe the
separate regime of ``non-Fermi liquid'' behavior at higher temperatures near
the quantum critical point. The relationship to experimental results on doped
semiconductors and heavy-fermion compounds is noted.Comment: 25 pages; Contribution to the Royal Society Discussion Meeting on
"The Metal-Non Metal Transition in Macroscopic and Microscopic Systems",
March 5-6, 199
Metallization of Fluid Hydrogen
The electrical resistivity of liquid hydrogen has been measured at the high
dynamic pressures, densities and temperatures that can be achieved with a
reverberating shock wave. The resulting data are most naturally interpreted in
terms of a continuous transition from a semiconducting to a metallic, largely
diatomic fluid, the latter at 140 GPa, (ninefold compression) and 3000 K. While
the fluid at these conditions resembles common liquid metals by the scale of
its resistivity of 500 micro-ohm-cm, it differs by retaining a strong pairing
character, and the precise mechanism by which a metallic state might be
attained is still a matter of debate. Some evident possibilities include (i)
physics of a largely one-body character, such as a band-overlap transition,
(ii) physics of a strong-coupling or many-body character,such as a Mott-Hubbard
transition, and (iii) processes in which structural changes are paramount.Comment: 12 pages, RevTeX format. Figures available on request; send mail to:
[email protected] To appear: Philosophical Transaction of the Royal
Society
Effect of simultaneous application of field and pressure on magnetic transitions in LaCaMnO
We study combined effect of hydrostatic pressure and magnetic field on the
magnetization of LaCaMnO. We do not observe any
significant effect of pressure on the paramagnetic to ferromagnetic transition.
However, pressure asymmetrically affects the thermal hysteresis across the
ferro-antiferromagnetic first-order transition, which has strong field
dependence. Though the supercooling (T*) and superheating (T**) temperatures
decrease and the value of magnetization at 5K (M) increases with
pressure, T* and M shows abrupt changes in tiny pressure of 0.68kbar.
These anomalies enhance with field. In 7Tesla field, transition to
antiferromagnetic phase disappears in 0.68kbar and M show significant
increase. Thereafter, increase in pressure up to 10kbar has no noticeable
effect on the magnetization
Performance Assessment and Mathematical Modeling of Process Parameters in Electrical Discharge Machining of EN-31 Tool Steel Material Using Taguchi DOE
In non-traditional machining, electrical discharge machining (EDM) has tremendous potential on account of versatility of its applications and is successfully, commercially used in modern industries. EDM process is capable to machine geometrically complex, hard material components, tool steels, composites, super alloys, ceramics and carbides. In EDM, Material Removal Rate (MRR) and Tool wear rate (TWR) are generally analyzed to assess its performance. For this, a perfect combination of input variables is required. In the present study, machining is done on Tool steel workpiece material using a pure copper electrode. The input parameters like Pulse-ON time, Pulse- OFF time, Current and Gap voltage are selected for experimentation and Taguchi method is employed for the DOE by considering 4 factors and 3 levels. A total of 27 experiments (L27 orthogonal array) have been designed with a possible combination of selected input parameters. The present work mainly focuses on development of an extensive mathematical model for correlating the input and output variables using a conventional regression analysis. The adequacy of proposed model was tested with the help of some collected data through experimentation using taguchi optimized DOE. The proposed linear multi-variable regression equation was found to be a best fitted model with 98% confidence levels.In non-traditional machining, electrical discharge machining (EDM) has tremendous potential on account of versatility of its applications and is successfully, commercially used in modern industries. EDM process is capable to machine geometrically complex, hard material components, tool steels, composites, super alloys, ceramics and carbides. In EDM, Material Removal Rate (MRR) and Tool wear rate (TWR) are generally analyzed to assess its performance. For this, a perfect combination of input variables is required. In the present study, machining is done on Tool steel workpiece material using a pure copper electrode. The input parameters like Pulse-ON time, Pulse- OFF time, Current and Gap voltage are selected for experimentation and Taguchi method is employed for the DOE by considering 4 factors and 3 levels. A total of 27 experiments (L27 orthogonal array) have been designed with a possible combination of selected input parameters. The present work mainly focuses on development of an extensive mathematical model for correlating the input and output variables using a conventional regression analysis. The adequacy of proposed model was tested with the help of some collected data through experimentation using taguchi optimized DOE. The proposed linear multi-variable regression equation was found to be a best fitted model with 98% confidence levels
Comment on ''the controlled charge ordering and evidence of the metallic state in PrCaMnO films''
In a recent paper (2000 \QTR{it}{J. Phys.: Condens. Matter} \QTR{bf}{12}
L133) Lee \QTR{it}{et al.} have studied the transport properties of
PrCaMnO thin films. They claimed that they are able to
controlled the charge-ordered (CO) state by the lattice strains. We propose
herein another alternative since another indexation of the orientation of the
film can be found leading to almost no distortion of the cell, as compared to
the bulk compound.Comment: 2 page
- …