1,086 research outputs found
Jwst from Below: An Overview of the Construction of the James Webb Space Telescope, Interesting Metrology, and Cryogenic-Vacuum Testing
NASA's James Webb Space Telescope (JWST) is a 6.6m diameter, segmented, deployable telescope for cryogenic IR space astronomy (40K). The JWST Observatory includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM) that contains four science instruments (SI) and the guider. The SIs are mounted to a composite metering structure. The SI and guider units are integrated to the ISIM structure and optically tested at NASA Goddard Space Flight Center as a suite using a telescope simulator (Optical Telescope Element SIMulator; OSIM). OSIM is a full field, cryogenic JWST telescope simulator. SI performance, including alignment and wavefront error, is evaluated using OSIM. This is an overview presentation to undergraduate students and other personnel at the University of Richmond, planned for 12 Oct, 2016. It uses material previously released by NASA on the Internet (e.g., via Flickr) or at engineering conferences (e.g., SPIE). This presentation provides an overview of the status of the project, with an emphasis on optics and measurement
Recommended from our members
Numerical investigation of high-speed droplet impact using a multiscale two-fluid approach
A single droplet impact onto solid surfaces remains a fundamental and challenging topic in both experimental and numerical studies with significant importance in a plethora of industrial applications, ranging from printing technologies to fuel injection in internal combustion engines. Under high-speed impact conditions, additional complexities arise as a result of the prompt droplet splashing and the subsequent violent fragmentation; thus, different flow regimes and a vast spectrum of sizes for the produced secondary flow structures coexist in the flow field. The present work introduces a numerical methodology to capture the multiscale processes involved with respect to local topological characteristics. The proposed methodology concerns a compressible Σ-Υ two-fluid model with dynamic interface sharpening based on an advanced flow topology detection algorithm. The model has been developed in OpenFOAM® and provides the flexibility of dealing with the multiscale character of droplet splashing, by switching between a sharp and a diffuse interface within the Eulerian-Eulerian framework in segregated and dispersed flow regions, respectively. An additional transport equation for the interface surface area density (Σ) introduces important information for the sub-grid scale phenomena, which is exploited in the dispersed flow regions to provide an insight into the extended cloud of secondary droplets after impact on the target. A high-speed water droplet impact case has been examined and evaluated against new experimental data; these refer to a millimetre size droplet impacting a solid dry smooth surface at velocity as high as 150m/s, which corresponds to a Weber number of ~7.6×10^5. At the investigated impact conditions compressibility effects dominate the early stages of droplet splashing. A strong shock wave forms and propagates inside the droplet, where transonic Mach numbers occur; local Mach numbers up to 2.5 are observed for the expelled surrounding gas outside the droplet. The proposed numerical approach is found to capture relatively accurately the phenomena and provide significant information regarding the produced flow structure dimensions, which is not available from the experiment
Testing the Noncommutative Standard Model at a Future Photon Collider
Extensions of the Standard Model of elementary particle physics to
noncommutative geometries have been proposed as a low energy limit of string
models. Independent of this motivation, one may consider such a model as an
effective field theory with higher-dimensional operators containing an
antisymmetric rank-two background field. We study the signals of such a
Noncommutative Standard Model (NCSM) and analyze the discovery potential of a
future photon collider, considering angular distributions in fermion pair
production.Comment: 13 pages RevTeX, Feynman diagrams and figures included, references
added, typographical errors in Feynman rules corrected (all results remain
unchangend, since correct Feynman rules were used in the calculations), to
appear in Phys. Rev.
Cosmological and Black Hole Spacetimes in Twisted Noncommutative Gravity
We derive noncommutative Einstein equations for abelian twists and their
solutions in consistently symmetry reduced sectors, corresponding to twisted
FRW cosmology and Schwarzschild black holes. While some of these solutions must
be rejected as models for physical spacetimes because they contradict
observations, we find also solutions that can be made compatible with low
energy phenomenology, while exhibiting strong noncommutativity at very short
distances and early times.Comment: LaTeX 12 pages, JHEP.st
Algebraic approach to quantum field theory on a class of noncommutative curved spacetimes
In this article we study the quantization of a free real scalar field on a
class of noncommutative manifolds, obtained via formal deformation quantization
using triangular Drinfel'd twists. We construct deformed quadratic action
functionals and compute the corresponding equation of motion operators. The
Green's operators and the fundamental solution of the deformed equation of
motion are obtained in terms of formal power series. It is shown that, using
the deformed fundamental solution, we can define deformed *-algebras of field
observables, which in general depend on the spacetime deformation parameter.
This dependence is absent in the special case of Killing deformations, which
include in particular the Moyal-Weyl deformation of the Minkowski spacetime.Comment: LaTeX 14 pages, no figures, svjour3.cls style; v2: clarifications and
references added, compatible with published versio
LIDAR Metrology for Prescription Characterization and Alignment of Large Mirrors
We describe the use of LIDAR, or "laser radar," (LR) as a fast, accurate, and non-contact tool for the measurement of the radius of curvature (RoC) of large mirrors. We report the results of a demonstration of this concept using a commercial laser radar system. We measured the RoC of a 1.4m x 1m spherical mirror with a nominal RoC of 4.6 m with a manufacturing tolerance of 4600mm +/- 6mm. The prescription of the mirror is related to its role as ground support equipment used in the test of part of the James Webb Space Telescope (JWST). The RoC of such a large mirror is not easily measured without contacting the surface. From a position near the center of curvature of the mirror, the LIDAR scanned the mirror surface, sampling it with 1 point per 3.5 sq cm. The measurement consisted of 3983 points and lasted only a few minutes. The laser radar uses the LIDAR signal to provide range, and encoder information from angular azimuth and elevation rotation stages provide the spherical coordinates of a given point. A best-fit to a sphere of the measured points was performed. The resulting RoC was within 20 ppm of the nominal RoC, also showing good agreement with the results of a laser tracker-based, contact metrology. This paper also discusses parameters such as test alignment, scan density, and optical surface type, as well as future possible application for full prescription characterization of aspherical mirrors, including radius, conic, off-axis distance, and aperture
Far-Ultraviolet Color Gradients in Early-Type Galaxies
We discuss far-UV (1500 A) surface photometry and FUV-B color profiles for 8
E/S0 galaxies from images taken with the Ultraviolet Imaging Telescope,
primarily during the Astro-2 mission. In three cases, the FUV radial profiles
are more consistent with an exponential than a de Vaucouleurs function, but
there is no other evidence for the presence of a disk or of young, massive
stars. In all cases except M32 the FUV-B color becomes redder at larger radii.
There is a wide range of internal radial FUV-B color gradients. However, we
find no correlation between the FUV-B color gradients and internal metallicity
gradients based on Mg absorption features. We conclude that metallicity is not
the sole parameter controlling the "UV upturn component" in old populations.Comment: 11 pages; tar.gz file includes LaTeX text file, 3 PostScript figures.
Paper to be published in ApJ Letter
Excitatory and inhibitory projections in parallel pathways from the inferior colliculus to the auditory thalamus
Individual subdivisions of the medial geniculate body (MG) receive a majority of their ascending inputs from 1 or 2 subdivisions of the inferior colliculus (IC). This establishes parallel pathways that provide a model for understanding auditory projections from the IC through the MG and on to auditory cortex. A striking discovery about the tectothalamic circuit was identification of a substantial GABAergic component. Whether GABAergic projections match the parallel pathway organization has not been examined. We asked whether the parallel pathway concept is reflected in guinea pig tectothalamic pathways and to what degree GABAergic cells contribute to each pathway. We deposited retrograde tracers into individual MG subdivisions (ventral, MGv; medial, MGm; dorsal, MGd; suprageniculate, MGsg) to label tectothalamic cells and used immunochemistry to identify GABAergic cells. The MGv receives most of its IC input (~75%) from the IC central nucleus (ICc); MGd and MGsg receive most of their input (~70%) from IC dorsal cortex (ICd); and MGm receives substantial input from both ICc (~40%) and IC lateral cortex (~40%). Each MG subdivision receives additional input (up to 32%) from non-dominant IC subdivisions, suggesting cross-talk between the pathways. The proportion of GABAergic cells in each pathway depended on the MG subdivision. GABAergic cells formed ~20% of IC inputs to MGv or MGm, ~11% of inputs to MGd, and 4% of inputs to MGsg. Thus, non-GABAergic (i.e., glutamatergic) cells are most numerous in each pathway with GABAergic cells contributing to different extents. Despite smaller numbers of GABAergic cells, their distributions across IC subdivisions mimicked the parallel pathways. Projections outside the dominant pathways suggest opportunities for excitatory and inhibitory crosstalk. The results demonstrate parallel tectothalamic pathways in guinea pigs and suggest numerous opportunities for excitatory and inhibitory interactions within and between pathways
Recommended from our members
Wall shear stress from jetting cavitation bubbles
The collapse of a cavitation bubble near a rigid boundary induces a high-speed transient jet accelerating liquid onto the boundary. The shear flow produced by this event has many applications, examples of which are surface cleaning, cell membrane poration and enhanced cooling. Yet the magnitude and spatio-temporal distribution of the wall shear stress are not well understood, neither experimentally nor by simulations. Here we solve the flow in the boundary layer using an axisymmetric compressible volume-of-fluid solver from the OpenFOAM framework and discuss the resulting wall shear stress generated for a non-dimensional distance,γ = 1.0 (γ = h/Rmax, where h is the distance of the initial bubble centre to the boundary, and Rmax is the maximum spherical equivalent radius of the bubble). The calculation of the wall shear stress is found to be reliable once the flow region with constant shear rate in the boundary layer is determined. Very high wall shear stresses of 100 kPa are found during the early spreading of the jet, followed by complex flows composed of annular stagnation rings and secondary vortices. Although the simulated bubble dynamics agrees very well with experiments, we obtain only qualitative agreement with experiments due to inherent experimental challenges
- …