3,858 research outputs found

    High-strength large-diameter carbon-base fibers

    Get PDF
    Material is applicable as reinforcement for metal matrix composites. Composites with large diameter, carbon base monofilaments offer advantages of superior strength at high temperatures and low density and for high temperature equipment where component weight must be minimized

    Improvement of chemical vapor deposition process for production of large diameter carbon base monofilaments

    Get PDF
    Research was conducted to develop large diameter carbon monofilament, containing 25 to 35 mole % element boron, in the 2.0 to 10.0 mil diameter range using the chemical vapor deposition process. The objective of the program was to gain an understanding of the critical process variables and their effect on fiber properties. Synthesis equipment was modified to allow these variables to be studied. Improved control of synthesis variables permitted reduction in scatter of properties of the monofilaments. Monofilaments have been synthesized in the 3.0 to nearly 6.0 mil diameter range having measured values up to 552,000 psi for ultimate tensile strength and up to 30 million psi for elastic modulus

    Further development of chemical vapor deposition process for production of large diameter carbon-base monofilaments

    Get PDF
    The development of large diameter carbon-base monofilament in the 50 micron to 250 micron diameter range using the chemical vapor deposition process is described. The object of this program was to determine the critical process variables which control monofilament strength, monofilament modulus, and monofilament diameter. It was confirmed that wide scatter in the carbon substrate strength is primarily responsible for the scatter in the monofilament strength. It was also shown through etching experiments that defective substrate surface conditions which can induce low strength modular growth in the monofilament layers are best controlled by processing improvements during the synthesis of the substrate. Modulus was found to be linearily proportional to monofilament boron content. Filament modulus was increased to above 27.8MN/sq cm but only by a considerable increase in monofilament boron content to 60 wt. % or more. Monofilament diameter depended upon dwell time in the synthesis apparatus. A monofilament was prepared using these findings which had the combined properties of a mean U.T.S. of 398,000 N/sq cm, a modulus of 18.9 MN/sq cm (24,000,000 psi), and a diameter of 145 microns. Highest measured strength for this fiber was 451,000 N/sq cm (645,000 psi)

    Development of manufacturing process for large diameter carbon-base monofilaments by chemical vapor deposition Final report

    Get PDF
    Manufacturing process for large diameter carbon base monofilaments by chemical vapor depositio

    Tele-methylhistamine 1 distribution in rat brain

    Full text link
    Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/65997/1/j.1471-4159.1979.tb02303.x.pd

    Eigenvalue variance bounds for Wigner and covariance random matrices

    Get PDF
    This work is concerned with finite range bounds on the variance of individual eigenvalues of Wigner random matrices, in the bulk and at the edge of the spectrum, as well as for some intermediate eigenvalues. Relying on the GUE example, which needs to be investigated first, the main bounds are extended to families of Hermitian Wigner matrices by means of the Tao and Vu Four Moment Theorem and recent localization results by Erd\"os, Yau and Yin. The case of real Wigner matrices is obtained from interlacing formulas. As an application, bounds on the expected 2-Wasserstein distance between the empirical spectral measure and the semicircle law are derived. Similar results are available for random covariance matrices

    Mechanical loss of a hydroxide catalysis bond between sapphire substrates and its effect on the sensitivity of future gravitational wave detectors

    Get PDF
    Hydroxide catalysis bonds are low mechanical loss joints which are used in the fused silica mirror suspensions of current room temperature interferometric gravitational wave detectors, one of the techniques which was essential to allow the recent detection of gravitational radiation by LIGO. More sensitive detectors may require cryogenic techniques with sapphire as a candidate mirror and suspension material, and thus hydroxide catalysis bonds are under consideration for jointing sapphire. This paper presents the first measurements of the mechanical loss of such a bond created between sapphire substrates and measured down to cryogenic temperatures. The mechanical loss is found to be 0.03±0.01 at room temperature, decreasing to (3±1)×10−4 at 20 K. The resulting thermal noise of the bonds on several possible mirror suspensions is presented

    Comparison of post-Newtonian templates for compact binary inspiral signals in gravitational-wave detectors

    Get PDF
    The two-body dynamics in general relativity has been solved perturbatively using the post-Newtonian (PN) approximation. The evolution of the orbital phase and the emitted gravitational radiation are now known to a rather high order up to O(v^8), v being the characteristic velocity of the binary. The orbital evolution, however, cannot be specified uniquely due to the inherent freedom in the choice of parameter used in the PN expansion as well as the method pursued in solving the relevant differential equations. The goal of this paper is to determine the (dis)agreement between different PN waveform families in the context of initial and advanced gravitational-wave detectors. The waveforms employed in our analysis are those that are currently used by Initial LIGO/Virgo, that is the time-domain PN models TaylorT1, TaylorT2, TaylorT3, TaylorT4 and TaylorEt, the effective one-body (EOB) model, and the Fourier-domain representation TaylorF2. We examine the overlaps of these models with one another and with the prototype effective one-body model (calibrated to numerical relativity simulations, as currently used by initial LIGO) for a number of different binaries at 2PN, 3PN and 3.5PN orders to quantify their differences and to help us decide whether there exist preferred families that are the most appropriate as search templates. We conclude that as long as the total mass remains less than a certain upper limit M_crit, all template families at 3.5PN order (except TaylorT3 and TaylorEt) are equally good for the purpose of detection. The value of M_crit is found to be ~ 12M_Sun for Initial, Enhanced and Advanced LIGO. From a purely computational point of view we recommend that 3.5PN TaylorF2 be used below Mcrit and EOB calibrated to numerical relativity simulations be used for total binary mass M > Mcrit.Comment: 27 pages, 8 figures, 4 tables, submitted to PR

    High Resolution Millimeter-Wave Mapping of Linearly Polarized Dust Emission: Magnetic Field Structure in Orion

    Get PDF
    We present 1.3 and 3.3 mm polarization maps of Orion-KL obtained with the BIMA array at approximately 4 arcsec resolution. Thermal emission from magnetically aligned dust grains produces the polarization. Along the Orion ``ridge'' the polarization position angle varies smoothly from about 10 degrees to 40 degrees, in agreement with previous lower resolution maps. In a small region south of the Orion ``hot core,'' however, the position angle changes by 90 degrees. This abrupt change in polarization direction is not necessarily the signpost of a twisted magnetic field. Rather, in this localized region processes other than the usual Davis-Greenstein mechanism might align the dust grains with their long axes parallel with the field, orthogonal to their normal orientation.Comment: AAS preprint:14 pages, 2 figures (3mm.eps and 1mm.eps); requires aaspp4.sty To be published in Astrophysical Journal Letter
    corecore