259 research outputs found
Recommended from our members
A tunable electrochromic fabry-perot filter for adaptive optics applications.
The potential for electrochromic (EC) materials to be incorporated into a Fabry-Perot (FP) filter to allow modest amounts of tuning was evaluated by both experimental methods and modeling. A combination of chemical vapor deposition (CVD), physical vapor deposition (PVD), and electrochemical methods was used to produce an ECFP film stack consisting of an EC WO{sub 3}/Ta{sub 2}O{sub 5}/NiO{sub x}H{sub y} film stack (with indium-tin-oxide electrodes) sandwiched between two Si{sub 3}N{sub 4}/SiO{sub 2} dielectric reflector stacks. A process to produce a NiO{sub x}H{sub y} charge storage layer that freed the EC stack from dependence on atmospheric humidity and allowed construction of this complex EC-FP stack was developed. The refractive index (n) and extinction coefficient (k) for each layer in the EC-FP film stack was measured between 300 and 1700 nm. A prototype EC-FP filter was produced that had a transmission at 500 nm of 36%, and a FWHM of 10 nm. A general modeling approach that takes into account the desired pass band location, pass band width, required transmission and EC optical constants in order to estimate the maximum tuning from an EC-FP filter was developed. Modeling shows that minor thickness changes in the prototype stack developed in this project should yield a filter with a transmission at 600 nm of 33% and a FWHM of 9.6 nm, which could be tuned to 598 nm with a FWHM of 12.1 nm and a transmission of 16%. Additional modeling shows that if the EC WO{sub 3} absorption centers were optimized, then a shift from 600 nm to 598 nm could be made with a FWHM of 11.3 nm and a transmission of 20%. If (at 600 nm) the FWHM is decreased to 1 nm and transmission maintained at a reasonable level (e.g. 30%), only fractions of a nm of tuning would be possible with the film stack considered in this study. These tradeoffs may improve at other wavelengths or with EC materials different than those considered here. Finally, based on our limited investigation and material set, the severe absorption associated with the refractive index change suggests that incorporating EC materials into phase correcting spatial light modulators (SLMS) would allow for only negligible phase correction before transmission losses became too severe. However, we would like to emphasize that other EC materials may allow sufficient phase correction with limited absorption, which could make this approach attractive
Imaging covalent bond formation by H atom scattering from graphene
Viewing the atomic-scale motion and energy dissipation pathways involved in forming a covalent bond is a longstanding challenge for chemistry. We performed scattering experiments of H atoms from graphene and observed a bimodal translational energy loss distribution. Using accurate first-principles dynamics simulations, we show that the quasi-elastic channel involves scattering through the physisorption well where collision sites are near the centers of the six-membered C-rings. The second channel results from transient CāH bond formation, where H atoms lose 1 to 2 electron volts of energy within a 10-femtosecond interaction time. This remarkably rapid form of intramolecular vibrational relaxation results from the C atomās rehybridization during bond formation and is responsible for an unexpectedly high sticking probability of H on graphene
Recommended from our members
Summary of Sandia research on metal tritides : FY 2007.
Sandia National Laboratories has cradle to grave responsibility for all neutron generators in the US nuclear weapons stockpile. As such, much research effort is exerted to develop a comprehensive understanding of all the major components of a neutron generator. One of the key components is the tritium containing target. The target is a thin metal tritide film. Sandia's research into metal tritides began in the early 1960's with a collaboration with the Denver Research Institute (DRI) and continues to this day with a major in house research effort. This document is an attempt to briefly summarize what is known about the aging of erbium tritide and to review the major publications conducted at Sandia in FY 07. First, a review of our knowledge of helium in erbium tritide will be presented. Second, executive summaries of the six major SAND reports regarding neutron tube targets published in FY07 by Department 2735, the Applied Science and Technology Maturation Department, and research partners are presented
Prognostic and predictive value of androgen receptor expression in postmenopausal women with estrogen receptor-positive breast cancer : results from the Breast International Group Trial 1-98
The androgen receptor (AR) is an emerging prognostic marker and therapeutic target in breast cancer. AR is expressed in 60-80% of breast cancers, with higher prevalence among estrogen receptor-positive (ER+) tumors. Androgen treatment inhibits ER signaling in ER+/AR+ breast cancer cell lines, and AR expression is associated with improved survival for this subtype in epidemiologic studies. However, whether AR expression modifies the efficacy of selective ER modulators or aromatase inhibitors for ER+ cancers remains unclear
Fur in Magnetospirillum gryphiswaldense Influences Magnetosomes Formation and Directly Regulates the Genes Involved in Iron and Oxygen Metabolism
Magnetospirillum gryphiswaldense strain MSR-1 has the unique capability of taking up large amounts of iron and synthesizing magnetosomes (intracellular magnetic particles composed of Fe3O4). The unusual high iron content of MSR-1 makes it a useful model for studying biological mechanisms of iron uptake and homeostasis. The ferric uptake regulator (Fur) protein plays a key role in maintaining iron homeostasis in many bacteria. We identified and characterized a fur-homologous gene (MGR_1314) in MSR-1. MGR_1314 was able to complement a fur mutant of E. coli in iron-responsive manner in vivo. We constructed a fur mutant strain of MSR-1. In comparison to wild-type MSR-1, the mutant strain had lower magnetosome formation, and was more sensitive to hydrogen peroxide and streptonigrin, indicating higher intracellular free iron content. Quantitative real-time RT-PCR and chromatin immunoprecipitation analyses indicated that Fur protein directly regulates expression of several key genes involved in iron transport and oxygen metabolism, in addition it also functions in magnetosome formation in M. gryphiswaldense
Aggregation and settling in aqueous polydisperse alumina nanoparticle suspensions
Nanoparticle suspensions (also called nanofluids) are often polydisperse and
tend to settle with time. Settling kinetics in these systems are known to be
complex and hence challenging to understand. In this work, polydisperse
spherical alumina (Al2O3) nanoparticles in the size range of ~10-100nm were
dispersed in water and examined for aggregation and settling behaviour near its
isoelectric point (IEP). A series of settling experiments were conducted and
the results were analysed by photography and by Small Angle X-ray Scattering
(SAXS). The settling curve obtained from standard bed height measurement
experiments indicated two different types of behaviour, both of which were also
seen in the SAXS data. But the SAXS data were remarkably able to pick out the
rapid settling regime as a result of the high temporal resolution (10s) used.
By monitoring the SAXS intensity, it was further possible to record the
particle aggregation process for the first time. Optical microscopy images were
produced on drying and dried droplets extracted from the suspension at various
times. Dried deposits showed the rapid decrease in the number of very large
particles with time which qualitatively validates the SAXS prediction, and
therefore its suitability as a tool to study unstable polydisperse colloids.
Keywords: Nanoparticles, nanofluids, polydisperse, aggregation, settling,
alumina, microscopy, SAX
Prospective Environmental Life Cycle Assessment of Nanosilver T-Shirts
A cradle-to-grave life cycle assessment (LCA) is performed to compare nanosilver T-shirts with conventional T-shirts with and without biocidal treatment. For nanosilver production and textile incorporation, we investigate two processes: flame spray pyrolysis (FSP) and plasma polymerization with silver co-sputtering (PlaSpu). Prospective environmental impacts due to increased nanosilver T-shirt commercialization are estimated with six scenarios. Results show significant differences in environmental burdens between nanoparticle production technologies: The "cradle-to-gate" climate footprint of the production of a nanosilver T-shirt is 2.70 kg of CO2-equiv (FSP) and 7.67-166 kg of CO2-equiv (PlaSpu, varying maturity stages). Production of conventional T-shirts with and without the biocide triclosan has emissions of 2.55 kg of CO2-equiv (contribution from triclosan insignificant). Consumer behavior considerably affects the environmental impacts during the use phase. Lower washing frequencies can compensate for the increased climate footprint of FSP nanosilver T-shirt production. The toxic releases from washing and disposal in the life cycle of T-shirts appear to be of minor relevance. By contrast, the production phase may be rather significant due to toxic silver emissions at the mining site if high silver quantities are require
- ā¦