22,091 research outputs found
Effect of reduction of strategic Columbium addition in 718 Alloy on the structure and properties
A series of alloys was developed having a base composition similar to Inconel 718, with reduced Cb levels of 3.00 and 1.10 wt% Cb. Substitutions of 3.0% W, 3.0W + 0.9V or Mo increased from 3.0% to 5.8% were made for the Cb in these alloys. Two additional alloys, one containing 3.49% Cb and 1.10% Ti and another containing 3.89% Cb and 1.29% Ti were also studied. Tensile properties at rooom and elevated temperatures, stress-rupture tests, and an analysis of extracted phases were carried out for each of the alloys. Additions of solid solution elements to a reduced Cb alloy had no significant effect on the properties of the alloys under either process condition. The solution and age alloys with substitutions of 1.27% i at 3.89% Cb had tensile properties similar top hose of the original alloy and stress-rupture properties superior to the original alloy. The improved stress-rupture properties were the result of significant precipitation of Ni3Ti-gamma prime in the alloy, which is more stable than gamma' at the elevated temperatures. At lower temperatures, the new alloy benefits from gamma' strengthening. With more precise control and proper processing, the reduced Cb direct-age alloy could substitute for Alloy 718 in high strength applications
A 128K-bit CCD buffer memory system
A prototype system was implemented to demonstrate that CCD's can be applied advantageously to the problem of low power digital storage and particularly to the problem of interfacing widely varying data rates. 8K-bit CCD shift register memories were used to construct a feasibility model 128K-bit buffer memory system. Peak power dissipation during a data transfer is less than 7 W., while idle power is approximately 5.4 W. The system features automatic data input synchronization with the recirculating CCD memory block start address. Descriptions are provided of both the buffer memory system and a custom tester that was used to exercise the memory. The testing procedures and testing results are discussed. Suggestions are provided for further development with regards to the utilization of advanced versions of CCD memory devices to both simplified and expanded memory system applications
Two-Band-Type Superconducting Instability in MgB2
Using the tight-binding method for the -bands in MgB, the Hubbard
on-site Coulomb interaction on two inequivalent boron -orbitals is
transformed into expressions in terms of -band operators. For scattering
processes relevant to the problemin which a wave vector {\bf q} is parallel to
, it is found to take a relatively simple form consisting of
intra-band Coulomb scattering, interband pair scattering etc. with large
constant coupling constants. This allows to get a simple expression for the
amplitude of interband pair scattering between two -bands, which diverges
if the interband polarization function in it becomes large enough.The latter
was approximately evaluated and found to be largely enhanced in the band
structure in MgB. These results lead to a divergent interband pair
scattering, meaning two-band-type superconducting instability with enhanced
. Adding a subsidiary BCS attractive interaction in each band into
consideration, a semi-quantitative gap equation is given, and and isotope
exponent are derived. The present instability is asserted to be the
origin of high in MgB.Comment: 4 pages, to be published in J. Phys. Soc. Jpn. vol. 70, No.
Comparison of Post-injection Site Pain Between Technetium Sulfur Colloid and Technetium Tilmanocept in Breast Cancer Patients Undergoing Sentinel Lymph Node Biopsy.
BackgroundNo prior studies have examined injection pain associated with Technetium-99m Tilmanocept (TcTM).MethodsThis was a randomized, double-blinded study comparing postinjection site pain between filtered Technetium Sulfur Colloid (fTcSC) and TcTM in breast cancer lymphoscintigraphy. Pain was evaluated with a visual analogue scale (VAS) (0-100 mm) and the short-form McGill Pain Questionnaire (SF-MPQ). The primary endpoint was mean difference in VAS scores at 1-min postinjection between fTcSC and TcTM. Secondary endpoints included a comparison of SF-MPQ scores between the groups at 5 min postinjection and construction of a linear mixed effects model to evaluate the changes in pain during the 5-min postinjection period.ResultsFifty-two patients underwent injection (27-fTcSC, 25-TcTM). At 1-min postinjection, patients who received fTcSC experienced a mean change in pain of 16.8 mm (standard deviation (SD) 19.5) compared with 0.2 mm (SD 7.3) in TcTM (p = 0.0002). At 5 min postinjection, the mean total score on the SF-MPQ was 2.8 (SD 3.0) for fTcSC versus 2.1 (SD 2.5) for TcTM (p = 0.36). In the mixed effects model, injection agent (p < 0.001), time (p < 0.001) and their interaction (p < 0.001) were associated with change in pain during the 5-min postinjection period. The model found fTcSC resulted in significantly more pain of 15.2 mm (p < 0.001), 11.3 mm (p = 0.001), and 7.5 mm (p = 0.013) at 1, 2, and 3 min postinjection, respectively.ConclusionsInjection with fTcSC causes significantly more pain during the first 3 min postinjection compared with TcTM in women undergoing lymphoscintigraphy for breast cancer
Recommended from our members
An atlas of CO2 storage potential in the nearshore waters of the Texas coast – American Recovery and Reinvestment Act – “Gulf of Mexico Miocene CO2 site characterization mega-transect”
Bureau of Economic Geolog
Mechanical properties of coated titanium Beta-21S after exposure to air at 700 and 800 C
Mechanical properties of Beta-21S (Ti-15Mo-3Al-2.7Nb-0.2Si, wt percent) with glass, aluminide, and glass-on-aluminide coatings less than 3-micron thick were studied. Coatings were deposited by sol-gel processing or electron-beam evaporation onto 4.5-mil (113-micron) thick Beta-21S sheet from which, after oxidizing in air at 700 or 800 C, tensile test specimens were machined. Plastic elongation was the most severely degraded of the tensile properties; the glass-on-aluminide coatings were the most effective in preventing degradation. It was found that oxygen trapping by forming oxides in the coating, and reactions between the coatings and the Beta-21S alloy played significant roles
QU Carinae: a SNeIa progenitor?
Optical spectra obtained in 2006-07 of the nova-like cataclysmic variable QU
Car are studied for radial velocities, line profiles, and line identifications.
We are not able to confirm the reported 10.9 hr orbital period from 1982,partly
because our sampling is not ideal for this purpose and also, we suspect,
because our radial velocities are distorted by line profile changes due to an
erratic wind. P-Cygni profiles are found in several of the emission lines,
including those of C IV. Carbon lines are abundant in the spectra, suggesting a
carbon enrichment in the doner star. The presence of [O III] 5007\AA and [N II]
6584\AA is likely due to a diffuse nebula in the vicinity of the system.
The wind signatures in the spectra and the presence of nebular lines are in
agreement with the accretion wind evolution scenario that has been suggested to
lead to SNeIa. We argue that QU Car is a member of the V Sge subclass of CVs,
and a possible SNeIa progenitor. It is shown that the recent light curve of QU
Car has ~1 mag low states, similar to the light curve of V Sge, strengthening
the connection of QU Car with V Sge stars, supersoft x-ray sources, and SNeIa
progenitors.Comment: Accepted in the Astronomical Journal. 11 pages, 3 tables, 5 figure
Comment on `Renormalization-Group Calculation of the Dependence on Gravity of the Surface Tension and Bending Rigidity of a Fluid Interface'
It is shown that the interface model introduced in Phys. Rev. Lett. 86, 2369
(2001) violates fundamental symmetry requirements for vanishing gravitational
acceleration , so that its results cannot be applied to critical properties
of interfaces for .Comment: A Comment on a recent Letter by J.G. Segovia-L\'opez and V.
Romero-Roch\'{\i}n, Phys. Rev. Lett.86, 2369 (2001). Latex file, 1 page
(revtex
Electromagnetic Scattering from Relativistic Bound States
The quasipotential formalism for elastic scattering from relativistic bound
states is formulated based on the instant constraint in the Breit frame. The
quasipotential electromagnetic current is derived from Mandelstam's five-point
kernel and obeys a two-body Ward identity. Breit-frame wave functions are
obtained directly by solving integral equations with nonzero total
three-momentum, thus accomplishing a dynamical boost. Calculations of
electron-deuteron elastic form factors illustrate the importance of the
dynamical boost versus kinematic boosts of the rest frame wave functions.Comment: RevTeX 3.0 manuscript, 9 pages. UU-file is a single PostScript file
of the manuscript including figures. U. MD PP #93-17
- …