2,133 research outputs found
Effect of wind turbine generator model and siting on wind power changes out of large WECS arrays
Methods of reducing the WECS generation change through selection of the wind turbine model for each site, selection of an appropriate siting configuration, and wind array controls are discussed. An analysis of wind generation change from an echelon and a farm for passage of a thunderstorm is presented. Reduction of the wind generation change over ten minutes is shown to reduce the increase in spinning reserve, unloadable generation and load following requirements on unit commitment when significant WECS generation is present and the farm penetration constraint is satisfied. Controls on the blade pitch angle of all wind turbines in an array or a battery control are shown to reduce both the wind generation change out of an array and the effective farm penetration in anticipation of a storm so that the farm penetration constraint may be satisfied
Structure and morphology of an active conjugate relay zone, Messina Strait, southern Italy
Messina Strait is a narrow fault-bounded marine basin that separates the Calabrian peninsula from Sicily in southern Italy. It sits in a seismically active region where normal fault scarps and raised Quaternary marine terraces record ongoing extension driven by southeastward rollback of the Calabrian subduction zone. A review of published studies and new data shows that normal faults in the Messina Strait region define a conjugate relay zone where displacement is transferred along strike from NW-dipping normal faults in the northeast (southern Calabria) to the SE-dipping Messina-Taormina normal fault in the southwest (offshore eastern Sicily). The narrow marine strait is a graben undergoing active subsidence within the relay zone, where pronounced curvature of normal faults results from large strain gradients and clockwise rotations related to fault interactions. Based on regional fault geometries and published age constraints, we infer that normal faults in southern Calabria migrated northwest while normal faults in NE Sicily migrated southeast during the past ca. 2–2.5 Myr. This pattern has resulted in tectonic narrowing of the strait through time by inward migration of facing normal faults and rapid mantle-driven uplift
Drug resistance mediating Plasmodium falciparum polymorphisms and clinical presentations of parasitaemic children in Uganda.
BackgroundPlasmodium falciparum genetic polymorphisms that mediate altered drug sensitivity may impact upon virulence. In a cross-sectional study, Ugandan children with infections mutant at pfcrt K76T, pfmdr1 N86Y, or pfmdr1 D1246Y had about one-fourth the odds of symptomatic malaria compared to those with infections with wild type (WT) sequences. However, results may have been confounded by greater likelihood in those with symptomatic disease of higher density mixed infections and/or recent prior treatment that selected for WT alleles.MethodsPolymorphisms in samples from paired episodes of asymptomatic and symptomatic parasitaemia in 114 subjects aged 4-11 years were followed longitudinally in Tororo District, Uganda. Paired episodes occurred within 3-12 months of each other and had no treatment for malaria in the prior 60 days. The prevalence of WT, mixed, and mutant alleles was determined using multiplex ligase detection reaction-fluorescent microsphere assays.ResultsConsidering paired episodes in the same subject, the odds of symptomatic malaria were lower for infections with mutant compared to WT or mixed sequence at N86Y (OR 0.26, 95% CI 0.09-0.79, p = 0.018), but not K76T or D1246Y. However, symptomatic episodes (which had higher densities) were more likely than asymptomatic to be mixed (for N86Y OR 2.0, 95% CI 1.04-4.0, p = 0.036). Excluding mixed infections, the odds of symptomatic malaria were lower for infections with mutant compared to WT sequence at N86Y (OR 0.33, 95% CI 0.11-0.98, p = 0.046), but not the other alleles. However, if mixed genotypes were grouped with mutants in this analysis or assuming that mixed infections consisted of 50% WT and 50% mutant genotypes, the odds of symptomatic infection did not differ between infections that were mutant or WT at the studied alleles.ConclusionsAlthough infections with only the mutant pfmdr1 86Y genotype were associated with symptomatic infection, this association could primarily be explained by greater parasite densities and therefore greater prevalence of mixed infections in symptomatic children. These results indicate limited association between the tested polymorphisms and risk of symptomatic disease and highlight the value of longitudinal studies for assessing associations between parasite factors and clinical outcomes
Nucleation and Growth of the Superconducting Phase in the Presence of a Current
We study the localized stationary solutions of the one-dimensional
time-dependent Ginzburg-Landau equations in the presence of a current. These
threshold perturbations separate undercritical perturbations which return to
the normal phase from overcritical perturbations which lead to the
superconducting phase. Careful numerical work in the small-current limit shows
that the amplitude of these solutions is exponentially small in the current; we
provide an approximate analysis which captures this behavior. As the current is
increased toward the stall current J*, the width of these solutions diverges
resulting in widely separated normal-superconducting interfaces. We map out
numerically the dependence of J* on u (a parameter characterizing the material)
and use asymptotic analysis to derive the behaviors for large u (J* ~ u^-1/4)
and small u (J -> J_c, the critical deparing current), which agree with the
numerical work in these regimes. For currents other than J* the interface
moves, and in this case we study the interface velocity as a function of u and
J. We find that the velocities are bounded both as J -> 0 and as J -> J_c,
contrary to previous claims.Comment: 13 pages, 10 figures, Revte
Robotic-Movement Payload Lifter and Manipulator
A payload lifter/manipulator module includes a rotatable joint supporting spreader arms angularly spaced with respect to one another. A rigid arm is fixedly coupled to the joint and extends out therefrom to a tip. A tension arm has a first end and a second end with the first end being fixedly coupled to the tip of the rigid arm. The tension arm incorporates pivots along the length thereof. Each pivot can be engaged by or disengaged from the outboard end of a spreader arm based on a position of the spreader arm. A hoist, positioned remotely with respect to the module and coupled to the second end of the tension arm, controls the position of the spreader arms to thereby control the position of the rigid arm's tip. Payload lifter/manipulator assemblies can be constructed with one or more of the modules
Travelling waves in a drifting flux lattice
Starting from the time-dependent Ginzburg-Landau (TDGL) equations for a type
II superconductor, we derive the equations of motion for the displacement field
of a moving vortex lattice without inertia or pinning. We show that it is
linearly stable and, surprisingly, that it supports wavelike long-wavelength
excitations arising not from inertia or elasticity but from the
strain-dependent mobility of the moving lattice. It should be possible to image
these waves, whose speeds are a few \mu m/s, using fast scanning tunnelling
microscopy.Comment: 4 pages, revtex, 2 .eps figures imbedded in paper, title shortened,
minor textual change
Solitons on the edge of a two-dimensional electron system
We present a study of the excitations of the edge of a two-dimensional
electron droplet in a magnetic field in terms of a contour dynamics formalism.
We find that, beyond the usual linear approximation, the non-linear analysis
yields soliton solutions which correspond to uniformly rotating shapes. These
modes are found from a perturbative treatment of a non-linear eigenvalue
problem, and as solutions to a modified Korteweg-de Vries equation resulting
from a local induction approximation to the nonlocal contour dynamics. We
discuss applications to the edge modes in the quantum Hall effect.Comment: 4 pages, 2 eps figures (included); to appear in Phys. Rev. Letter
Framework for Defining and Assessing Benefits of a Modular Assembly Design Approach for Exploration Systems
A comprehensive modular assembly system model has been proposed that extends the art from modular hardware, to include in-space assembly, servicing and repair and it s critical components of infrastructure, agents and assembly operations. Benefits of modular assembly have been identified and a set of metrics defined that extends the art beyond the traditional measures of performance, with emphasis on criteria that allow life-cycle mission costs to be used as a figure of merit (and include all substantive terms that have an impact on the evaluation). The modular assembly approach was used as a basis for developing a Solar Electric Transfer Vehicle (SETV) concept and three modular assembly scenarios were developed. The modular assembly approach also allows the SETV to be entered into service much earlier than competing conventional configurations and results in a great deal of versatility in accommodating different launch vehicle payload capabilities, allowing for modules to be pre-assembled before launch or assembled on orbit, without changing the space vehicle design
Velocity Selection for Propagating Fronts in Superconductors
Using the time-dependent Ginzburg-Landau equations we study the propagation
of planar fronts in superconductors, which would appear after a quench to zero
applied magnetic field. Our numerical solutions show that the fronts propagate
at a unique speed which is controlled by the amount of magnetic flux trapped in
the front. For small flux the speed can be determined from the linear marginal
stability hypothesis, while for large flux the speed may be calculated using
matched asymptotic expansions. At a special point the order parameter and
vector potential are dual, leading to an exact solution which is used as the
starting point for a perturbative analysis.Comment: 4 pages, 2 figures; submitted to Phys. Rev. Letter
- …