13,016 research outputs found
Lithologic mapping of silicate rocks using TIMS
Common rock-forming minerals have thermal infrared spectral features that are measured in the laboratory to infer composition. An airborne Daedalus scanner (TIMS) that collects six channels of thermal infrared radiance data (8 to 12 microns), may be used to measure these same features for rock identification. Previously, false-color composite pictures made from channels 1, 3, and 5 and emittance spectra for small areas on these images were used to make lithologic maps. Central wavelength, standard deviation, and amplitude of normal curves regressed on the emittance spectra are related to compositional information for crystalline igneous silicate rocks. As expected, the central wavelength varies systematically with silica content and with modal quartz content. Standard deviation is less sensitive to compositional changes, but large values may result from mixed admixture of vegetation. Compression of the six TIMS channels to three image channels made from the regressed parameters may be effective in improving geologic mapping from TIMS data, and these synthetic images may form a basis for the remote assessment of rock composition
Geologic utility of improved orbital measurements
From a geologists point of view, the most important use of orbital cameras is probably to provide spatial or context information in remote areas. This information can be extracted even from broad-band, single channel images provided that the spatial resolution is adequate for the problem at hand. Topographic information, usually provided by stereoscopic images, is next in importance. Any satellite system designed to satisfy general geologic requirements must produce stereo images, preferably with large base/height ratios of 0.5 or more. Satellite coverage at different illumination geometries could provide low Sun angles for regions of low relief where topography must be accentuated, and high Sun angles for areas of high relief or when multispectral data are being collected. Thus a different polar orbit than that of LANDSAT would be advantageous. The extended spectral sensitivity of scanner permits interferences of the composition of rocks in the scene to be drawn directly, rather than from contextual clues
Recommended from our members
The area around the Orion Nebula observed in the CO (J = 1- 0) transition
An area 1 deg2 around the Orion Nebula has been surveyed with a 2.6 km s-1 wide single-channel receiver. The map shows considerable structure in the east including a bright spot 24' (2.8 pc) from the main CO peak
Modelling the impact of the recession on greenhouse gases from agriculture in Ireland
working paperThe effects of the recession of 2009 have been felt across the economy of
Ireland. The rapid contraction in economic activity has had its effect on greenhouse
gas (GHG) emissions as well. It is possible to model the recession’s effect on
agricultural GHG in the FAPRI-Ireland GHG model using the latest international
commodity price projections from Food and Agricultural Policy Research Institute
(FAPRI). The FAPRI-Ireland GHG model creates projections of future levels of Irish
agricultural activity and then uses a mix of national and default emissions factors to
convert this activity to estimates of annual GHG emissions from now to 2020. Our
model is shocked using post-downturn commodity price projections for a selection of
exogenous prices. The changes to these international commodity prices reflect the
international market response to the downturn, and as such they have an impact on the
level of GHG emitted by the agricultural sector in Ireland. This analysis finds that,
despite the depth and breadth of the recession, the impact on GHG emissions from
Irish agriculture has been muted. The impact of the shock is to reduce the projected
annual emissions from the sector by only 0.14 Mt by 2020. This compares to the 2.97
Mt reduction in annual emissions which the sector would have to achieve if, for
example, a reduction target of 20 percent on 2005 levels were to be imposed
Retention and application of Skylab experiences to future programs
The problems encountered and special techniques and procedures developed on the Skylab program are described along with the experiences and practical benefits obtained for dissemination and use on future programs. Three major topics are discussed: electrical problems, mechanical problems, and special techniques. Special techniques and procedures are identified that were either developed or refined during the Skylab program. These techniques and procedures came from all manufacturing and test phases of the Skylab program and include both flight and GSE items from component level to sophisticated spaceflight systems
The Viking surface sampler
A surface sampler subsystem for the Viking Lander has been designed, fabricated, cleaned, and successfully tested. Testing has included component level tests to qualification environment and subsystem level tests. This development hardware has also been integrated into a System Test Bed (STB) for the lander system. In addition to the normal dynamic and thermal environments the surface sampler hardware has been tested in an aircraft to simulate the effects of the reduced Martian gravity. Although problems have been encountered with the first-build and integration, the basic design appears to be sound and hardware qualification is scheduled for late 1973
THE EFFECT OF RISK AND AUTONOMY ON INDEPENDENT HOG PRODUCERS' CONTRACTING DECISIONS
The introduction of vertical coordination in the hog industry has provided producers with new business arrangements for raising hogs. While some researchers have elicited utility functions for hog producers on the basis of income risk, none have addressed autonomy, a factor which appears to be important in business arrangement selection for independent family hog operations. In this study, a method is developed for eliciting a multi-attribute function with attributes of income and autonomy. Utility functions are elicited for a group of Minnesota farrow-to-finish hog producers. For these producers, autonomy dominated risk as the most important attribute in business arrangement selection.Livestock Production/Industries,
Infrared scanner Patent
Infrared scanning system for maintaining spacecraft orientation with earth referenc
Data protection: the challenges facing social networking
The popularity of social networking sites has increased dramatically over the past decade. A recent report indicated that thirty-eight percent of online users have a social networking profile. Many of these social networking site users (SNS users) post or provide personal information over the internet every day. According to the latest OfCom study, the average adult SNS user has profiles on 1.6 sites and most check their profiles at least once every other day. However, the recent rise in social networking activity has opened the door to the misuse and abuse of personal information through identity theft, cyber stalking, and undesirable screenings by prospective employers. Behavioral advertising programs have also misused personal information available on social networking sites. Society is now facing an important question: what level of privacy should be expected and required within the social networking environment
- …