119,018 research outputs found
Measurement of collagen synthesis by cells grown under different mechanical stimuli
INTRODUCTION: The use of scaffolds in tissue engineering is essential to provide cells with a matrix for cell proliferation and differentiation resulting in tissue regeneration. Normally this process involves seeding cells onto an artificial biodegradable scaffold providing mechanical support for cells until there is sufficient extracellular matrix deposition (ECM) to replace the artificial scaffold. Collagen is the bulk protein found in the ECM and measurement of its synthesis is the most direct, absolute indicator of ECM production
Monogroove heat pipe design: Insulated liquid channel with bridging wick
A screen mesh artery supported concentrically within the evaporator section of a heat pipe liquid channel retains liquid in the channel. Continued and uniform liquid feed to the heat pipe evaporation section (20) during periods of excessive heat transfer is assured. The overall design provides high evaporation and condensation film coefficients for the working fluid by means of the circumferential grooves in the walls of the vapor channel, while not interfering with the overall heat transport capability of the axial groove. The design has particular utility in zero-g environments
Astrophysical tests for radiative decay of neutrinos and fundamental physics implications
The radiative lifetime tau for the decay of massious neutrinos was calculated using various physical models for neutrino decay. The results were then related to the astrophysical problem of the detectability of the decay photons from cosmic neutrinos. Conversely, the astrophysical data were used to place lower limits on tau. These limits are all well below predicted values. However, an observed feature at approximately 1700 A in the ultraviolet background radiation at high galactic latitudes may be from the decay of neutrinos with mass approximately 14 eV. This would require a decay rate much larger than the predictions of standard models but could be indicative of a decay rate possible in composite models or other new physics. Thus an important test for substructure in leptons and quarks or other physics beyond the standard electroweak model may have been found
Globally baryon symmetric cosmology, GUT spontaneous symmetry breaking, and the structure of the universe
Grand unified theories (GUT) such as SU(5), with spontaneous symmetry breaking, can lead more naturally to a globally baryon symmetric big bang cosmology with a domain structure than to a totally asymmetric cosmology. The symmetry is broken at random in causally independent domains, favoring neither a baryon nor an antibaryon excess on a universal scale. Because of the additional freedom in the high-energy physics allowed by such GUT gauge theories, new observational tests may be possible. Arguments in favor of this cosmology and various observational tests are discussed
An analytical and experimental assessment of flexible road ironwork support structures
This paper describes work undertaken to investigate the mechanical performance of road ironwork installations in highways, concentrating on the chamber construction. The principal aim was to provide the background research which would allow improved designs to be developed to reduce the incidence of failures through improvements to the structural continuity between the installation and the surrounding pavement. In doing this, recycled polymeric construction materials (Jig Brix) were studied with a view to including them in future designs and specifications. This paper concentrates on the Finite Element (FE) analysis of traditional (masonry) and flexible road ironwork structures incorporating Jig Brix. The global and local buckling capacity of the Jig Brix elements was investigated and results compared well with laboratory measurements. FE models have also been developed for full-scale traditional (masonry) and flexible installations in a surrounding flexible (asphalt) pavement structure. Predictions of response to wheel loading were compared with full-scale laboratory measurements. Good agreement was achieved with the traditional (masonry) construction but poorer agreement for the flexible construction. Predictions from the FE model indicated that the use of flexible elements significantly reduces the tensile horizontal strain on the surface of the surrounding asphaltic material which is likely to reduce the incidence of surface cracking
Looking for heavier weak bosons with DUMAND
One or more heavier weak bosons may coexist with the standard weak boson, a broad program may be laid out for a search for the heavier W's via change in the total cross section due to the additional propagator, a concomitant search, and a subsequent search for significant antimatter in the universe involving the same annihilation, but being independent of possible neutrino oscillations. The program is likely to require detectors sensitive to higher energies, such as acoustic detectors
Limit cycles of a flexible shaft with hydrodynamic journal bearings in unstable regimes
A symmetric 3 mass rotor supported on hydrodynamic bearings is described. An approximate method of representing finite bearings is used to calculate bearing forces. As the method sums forces from a number of independent circular lobes lemon 3 and 4 lobe bearings are taken into account. The calculations are based on an axial groove bearing. Linear analysis precedes nonlinear simulation of some unstable conditions. The demonstration of small limit cycles suggests that necessarily flexible rotors e.g., helicopter tail rotors, may be practical without either tilt pad bearings or external dampers
Quantum atom optics with fermions from molecular dissociation
We study a fermionic atom optics counterpart of parametric down-conversion
with photons. This can be realized through dissociation of a Bose-Einstein
condensate of molecular dimers consisting of fermionic atoms. We present a
theoretical model describing the quantum dynamics of dissociation and find
analytic solutions for mode occupancies and atomic pair correlations, valid in
the short time limit. The solutions are used to identify upper bounds for the
correlation functions, which are applicable to any fermionic system and
correspond to ideal particle number-difference squeezingComment: Changes in response to referees' comments, updated reference
Evaluation of the gust-alleviation characteristics and handling qualities of a free-wing aircraft
Dynamic characteristics of aircraft with wings free to pivot spanwise axi
- …