Using EBSD and TEM-Kikuchi patterns to study local crystallography at the domain boundaries of lead zirconate titanate

Reliable EBSD mapping of 90° domains in a tetragonal ferroelectric perovskite has been achieved for the first time, together with reliable automated orientation determination from TEM-Kikuchi patterns. This has been used to determine misorientation angles at 90° domain boundaries and thus local <i>c</i>/<i>a</i> ratios. The sources of orientation noise/error and their effects on the misorientation angle data have been thoroughly analyzed and it is found that this gives a cosine distribution of misorientation angles about the mean with a characteristic width related to the width of the orientation noise distribution. In most cases, a good agreement is found between local <i>c</i>/<i>a</i> ratios and global measurements by X-ray diffraction, but some clear discrepancies have also been found suggesting that real local variations are present, perhaps as a consequence of compositional inhomogeneities

An ellipsoidal mirror for focusing neutral atomic and molecular beams

Manipulation of atomic and molecular beams is essential to atom optics applications including atom lasers, atom lithography, atom interferometry and neutral atom microscopy. The manipulation of charge-neutral beams of limited polarizability, spin or excitation states remains problematic, but may be overcome by the development of novel diffractive or reflective optical elements. In this paper, we present the first experimental demonstration of atom focusing using an ellipsoidal mirror. The ellipsoidal mirror enables stigmatic off-axis focusing for the first time and we demonstrate focusing of a beam of neutral, ground-state helium atoms down to an approximately circular spot, (26.8±0.5) μm×(31.4±0.8) μm in size. The spot area is two orders of magnitude smaller than previous reflective focusing of atomic beams and is a critical milestone towards the construction of a high-intensity scanning helium microscope

An ellipsoidal mirror for focusing neutral atomic and molecular beams

Manipulation of atomic and molecular beams is essential to atom optics applications including atom lasers, atom lithography, atom interferometry and neutral atom microscopy. The manipulation of charge-neutral beams of limited polarizability, spin or excitation states remains problematic, but may be overcome by the development of novel diffractive or reflective optical elements. In this paper, we present the first experimental demonstration of atom focusing using an ellipsoidal mirror. The ellipsoidal mirror enables stigmatic off-axis focusing for the first time and we demonstrate focusing of a beam of neutral, ground-state helium atoms down to an approximately circular spot, (26.8±0.5) μm×(31.4±0.8) μm in size. The spot area is two orders of magnitude smaller than previous reflective focusing of atomic beams and is a critical milestone towards the construction of a high-intensity scanning helium microscope

Combining M-FISH and Quantum Dot technology for fast chromosomal assignment of transgenic insertions

<p>Abstract</p> <p>Background</p> <p>Physical mapping of transgenic insertions by Fluorescence in situ Hybridization (FISH) is a reliable and cost-effective technique. Chromosomal assignment is commonly achieved either by concurrent G-banding or by a multi-color FISH approach consisting of iteratively co-hybridizing the transgenic sequence of interest with one or more chromosome-specific probes at a time, until the location of the transgenic insertion is identified.</p> <p>Results</p> <p>Here we report a technical development for fast chromosomal assignment of transgenic insertions at the single cell level in mouse and rat models. This comprises a simplified 'single denaturation mixed hybridization' procedure that combines multi-color karyotyping by Multiplex FISH (M-FISH), for simultaneous and unambiguous identification of all chromosomes at once, and the use of a Quantum Dot (QD) conjugate for the transgene detection.</p> <p>Conclusions</p> <p>Although the exploitation of the unique optical properties of QD nanocrystals, such as photo-stability and brightness, to improve FISH performance generally has been previously investigated, to our knowledge this is the first report of a purpose-designed molecular cytogenetic protocol in which the combined use of QDs and standard organic fluorophores is specifically tailored to assist gene transfer technology.</p

Research workshop to research work: initial steps in establishing health research systems on Malaita, Solomon Islands

<p>Abstract</p> <p>Introduction</p> <p>Atoifi Adventist Hospital is a 90 bed general hospital in East Kwaio, Malaita, Solomon Islands providing services to the population of subsistence villagers of the region. Health professionals at the hospital and attached College of Nursing have considerable human capacity and willingness to undertake health research. However they are constrained by limited research experience, training opportunities, research systems, physical infrastructure and access to resources. This brief commentary describes an 'Introduction to Health Research' workshop delivered at Atoifi Adventist Hospital in September 2009 and efforts to move from 'research workshop' to 'research work'.</p> <p>The Approach</p> <p>Using a participatory-action research approach underpinned by decolonising methodologies, staff from Atoifi Adventist Hospital and James Cook University (Queensland, Australia) collaboratively designed, implemented and evaluated a health research workshop. Basic health research principles and methods were presented using active learning methodologies. Following the workshop, Atoifi Adventist Hospital and Atoifi College of Nursing staff, other professionals and community members reported an increased awareness and understanding of health research. The formation of a local Research Committee, improved ethics review procedures and the identification of local research mentors followed the week long workshop. The workshop has acted as a catalyst for research activity, increasing structural and human resource capacity for local health professionals and community leaders to engage in research.</p> <p>Discussion and Conclusions</p> <p>Participants from a variety of educational backgrounds participated in, and received benefit from, a responsive, culturally and linguistically accessible health research workshop. Improving health research systems at a remote hospital and aligning these with local and national research agendas is establishing a base to strengthen public health research and practice on Malaita, Solomon Islands.</p

Effect of heat treatment on mechanical dissipation in Ta2_2O5_5 coatings

Thermal noise arising from mechanical dissipation in dielectric reflective coatings is expected to critically limit the sensitivity of precision measurement systems such as high-resolution optical spectroscopy, optical frequency standards and future generations of interferometric gravitational wave detectors. We present measurements of the effect of post-deposition heat treatment on the temperature dependence of the mechanical dissipation in ion-beam sputtered tantalum pentoxide between 11\,K and 300\,K. We find the temperature dependence of the dissipation is strongly dependent on the temperature at which the heat treatment was carried out, and we have identified three dissipation peaks occurring at different heat treatment temperatures. At temperatures below 200\,K, the magnitude of the loss was found to increase with higher heat treatment temperatures, indicating that heat treatment is a significant factor in determining the level of coating thermal noise.Comment: accepted Classical and Quantum Gravity 201

Impact of ivermectin administered for scabies treatment on the prevalence of head lice in Atoifi, Solomon Islands.

Scabies and head lice are ubiquitous ectoparasitic infestations that are common across the Pacific Islands. Ivermectin is an effective treatment for both conditions, although the doses used vary. At a community level, mass drug administration (MDA) with ivermectin is an effective strategy to decrease prevalence of scabies. To what extent MDA with ivermectin will also reduce prevalence of head lice is unknown. Head lice prevalence was assessed before and after MDA with oral ivermectin (at a dose of 200 micrograms per kilogram of body weight) administered on day 1 and day 8. The primary outcome was the change in prevalence of head louse infestation at two weeks compared to baseline. Longer term efficacy was assessed three months after MDA. 118 participants were enrolled. Baseline prevalence of active head louse infestation was 25.4% (95% CI 18.4-34.0). At three-month follow-up, prevalence was 7.5% (95% CI 2.7-12.3), a relative reduction of 70.6% (95% CI 72.7%-91.4%, p &lt;0.001). Head louse infestation was associated with younger age (age ≤10 years: prevalence 46.7%; adjusted odds ratio compared to adults of 7.2, 95%CI 2.0-25.9) and with having at least one other member of the household with active head louse infestation (adjusted odds ratio 4.3, 95%CI 1.7-11.1). Head louse infestation is common in the Solomon Islands. This proof of principle study shows that oral ivermectin at a dose of 200 micrograms per kilogram can reduce the burden of active head louse infestation, offering an additional collateral benefit of MDA with ivermectin for scabies control. ClinicalTrials.gov NCT03236168

Investigating the medium range order in amorphous Ta₂O₅ coatings

Ion-beam sputtered amorphous heavy metal oxides, such as Ta2O5, are widely used as the high refractive index layer of highly reflective dielectric coatings. Such coatings are used in the ground based Laser Interferometer Gravitational-wave Observatory (LIGO), in which mechanical loss, directly related to Brownian thermal noise, from the coatings forms an important limit to the sensitivity of the LIGO detector. It has previously been shown that heat-treatment and TiO2 doping of amorphous Ta2O5 coatings causes significant changes to the levels of mechanical loss measured and is thought to result from changes in the atomic structure. This work aims to find ways to reduce the levels of mechanical loss in the coatings by understanding the atomic structure properties that are responsible for it, and thus helping to increase the LIGO detector sensitivity. Using a combination of Reduced Density Functions (RDFs) from electron diffraction and Fluctuation Electron Microscopy (FEM), we probe the medium range order (in the 2-3 nm range) of these amorphous coatings

Practitioner accounts and knowledge production: an analysis of three marketing discourses

Responding to repeated calls for marketing academicians to connect with marketing actors, we offer an empirically-sourced discourse analysis of the ways in which managers portray their practices. Focusing on the micro-discourses and narratives that marketing actors draw upon to represent their work we argue that dominant representations of marketing knowledge production present a number of critical concerns for marketing theory and marketing education. We also evidence that the often promoted idea of a need to close the gap between theory - as a dominant discourse - and practice, as a way of doing marketing, is problematic to pursue. We suggest that a more fruitful agenda resides in the development of a range of polyphonic and creative micro-discourses of management, promoting context, difference and individual meaning in marketing knowledge production

Degradation of structure and properties of rail surface layer at long-term operation

The microstructure evolution and properties variation of the surface layer of rail steel after passed 500 and 1000 million tons of gross weight (MTGW) have been investigated. The wear rate increases to 3 and 3.4 times after passed 500 and 1000 MTGW, respectively. The corresponding friction coefficient decreases by 1.4 and 1.1 times. The cementite plates were destroyed and formed the cementite particles of around 10-50 nm in size after passed 500 MTGW. The early stage dynamical recrystallization was observed after passed 1000 MTGW. The mechanisms for these have been suggested. The large number of bend extinction contours is revealed in the surface layer. The internal stress field is evaluated