A Survey of Population Characteristics for Red Drum and Spotted Seatrout in Louisiana

Red drum and spatted seatrout stocks were sampled from seven separate study areas along the Louisiana coast and from one estuarine area in Texas, with additional intensive temporal (monthly) and microgeographic (range of salinity regimes) samplings being carried out in one Louisiana study area. Condition coefficients, which did not appear to be affected by salinity regimes within the microgeographic sampling area, varied significantly according to study area, with Texas fish showing significantly lower condition coefficients than Louisiana fish. Van Bertalanffy growth equations were fitted and annual mortality rates were estimated to obtain preliminary estimates of yields, population numbers, and densities of these species in Louisiana

A Survey of Population Characteristics for Red Drum and Spotted Seatrout in Louisiana

Red drum and spatted seatrout stocks were sampled from seven separate study areas along the Louisiana coast and from one estuarine area in Texas, with additional intensive temporal (monthly) and microgeographic (range of salinity regimes) samplings being carried out in one Louisiana study area. Condition coefficients, which did not appear to be affected by salinity regimes within the microgeographic sampling area, varied significantly according to study area, with Texas fish showing significantly lower condition coefficients than Louisiana fish. Van Bertalanffy growth equations were fitted and annual mortality rates were estimated to obtain preliminary estimates of yields, population numbers, and densities of these species in Louisiana

Electrically enhanced removal of solutes from filter cakes - interpretation of peak mass transfer rates

Some results from an experimental and theoretical investigation of cake washing assisted by d.c. electrical fields are reported. Electric fields are shown to increase the rate of removal of cations (Na+) from rutile filter cakes when the downstream electrode was the cathode. For anions (NO3 -) under the same experimental conditions, the removal rate also varied with the electric field but the effect was to slow the rate of mass transfer. To give initial insight into the observed phenomena, the effects are explained through a first order model. The basic assumptions of the model are that: (1) there are two external forces driving the transport of ions: (i) a pressure difference that causes a mean fluid flow in which the ions are embedded, and (ii) the DC electric field applied across the cake; and (2) there are two pools of ions: (i) those trapped in the pores, and (ii) those that move with either the main fluid flow or the electrically generated ionic current. The model demonstrates the same qualitative effects as seen in the experiments, with the magnitude of the effects dependent on the magnitudes of lateral and axial ion flux component constitutive forms

Transport processes during electrowashing of filter cakes

Applications of electric fields during washing of filter cakes increases the removal rate of ions from the cake mother liquor, and under appropriate conditions the field also increases the wash flow rate by electroosmosis. Experimental data that show the key effects of the fields on the rates of ion mass transfer are presented: with the downstream electrode acting as a cathode, cation removal rates are increased whilst the removal rate of the anions is decreased. The concentration profile of the cations with washing time shows an increase in concentration to a value above that of the mother liquor, before it decreases due to displacement by the fresh wash liquor. A model is formulated that describes the advection, dispersion, ion migration and electroosmosis transport processes in the cake. Numerical solution of the model gives cation concentration profiles at the exit of the cake that are in qualitative agreement with the experimental observations. Experimentally measured wash liquor flow rates tend to be lower than what traditional colloid science principles predict by a factor of 5 to 10: reasons for this difference, supported by experimental work from other researchers, are discussed

Stigma as a fundamental hindrance to the United States opioid overdose crisis response.

Alexander Tsai and co-authors discuss the role of stigma in responses to the US opioid crisis

Predicting 30-day mortality after hip fracture surgery: Evaluation of the National Hip Fracture Database case-mix adjustment model.

OBJECTIVES: The National Hip Fracture Database (NHFD) publishes hospital-level risk-adjusted mortality rates following hip fracture surgery in England, Wales and Northern Ireland. The performance of the risk model used by the NHFD was compared with the widely-used Nottingham Hip Fracture Score. METHODS: Data from 94 hospitals on patients aged 60 to 110 who had hip fracture surgery between May 2013 and July 2013 were analysed. Data were linked to the Office for National Statistics (ONS) death register to calculate the 30-day mortality rate. Risk of death was predicted for each patient using the NHFD and Nottingham models in a development dataset using logistic regression to define the models' coefficients. This was followed by testing the performance of these refined models in a second validation dataset. RESULTS: The 30-day mortality rate was 5.36% in the validation dataset (n = 3861), slightly lower than the 6.40% in the development dataset (n = 4044). The NHFD and Nottingham models showed a slightly lower discrimination in the validation dataset compared with the development dataset, but both still displayed moderate discriminative power (c-statistic for NHFD = 0.71, 95% confidence interval (CI) 0.67 to 0.74; Nottingham model = 0.70, 95% CI 0.68 to 0.75). Both models defined similar ranges of predicted mortality risk (1% to 18%) in assessment of calibration. CONCLUSIONS: Both models have limitations in predicting mortality for individual patients after hip fracture surgery, but the NHFD risk adjustment model performed as well as the widely-used Nottingham prognostic tool and is therefore a reasonable alternative for risk adjustment in the United Kingdom hip fracture population.Cite this article: Bone Joint Res 2017;6:550-556

Flow Properties of Tailored Net-Shape Thermoplastic Composite Preforms

A novel thermoplastic programmable preforming process, TP-P4, has been used to manufacture preforms for non-isothermal compression molding. Commingled glass and polypropylene yarns are deposited by robot onto a vacuum screen, followed by a heat-setting operation to stabilize the as-placed yarns for subsequent handling. After an optional additional preconsolidation stage, the preforms are molded by preheating and subsequent press forming in a shear edge tool. The in- and out-of-plane flow capabilities of the material were investigated, and compared to those of 40 wt% Glass Mat Thermoplastics (GMTs). Although the TP-P4 material has a fiber fraction of 60 wt%, the material could be processed to fill 77mm deep ribs with a thickness of 3mm, indicative of complex part production. The pressure requirements for out-of-plane flow were shown to depend on the fiber length and fiber alignment. Segregation phenomena were found to be less severe with TP-P4 than with GMT materia

Rapid Processing of Net-Shape Thermoplastic Planar-Random Composite Preforms

A novel thermoplastic composite preforming and moulding process is investigated to target cost issues in textile composite processing associated with trim waste, and the limited mechanical properties of current bulk flow-moulding composites. The thermoplastic programmable powdered preforming process (TP-P4) uses commingled glass and polypropylene yarns, which are cut to length before air assisted deposition onto a vacuum screen, enabling local preform areal weight tailoring. The as-placed fibres are heat-set for improved handling before an optional preconsolidation stage. The preforms are then preheated and press formed to obtain the final part. The process stages are examined to optimize part quality and throughput versus processing parameters. A viable processing route is proposed with typical cycle times below 40s (for a plate 0.5 × 0.5m2, weighing 2kg), enabling high production capacity from one line. The mechanical performance is shown to surpass that of 40wt.% GMT and has properties equivalent to those of 40wt.% GMTex at both 20°C and 80°

Identification of Alternative Transcripts Encoding the Essential Murine Gammaherpesvirus Lytic Transactivator RTA

The essential immediate early transcriptional activator RTA, encoded by gene 50, is conserved among all characterized gammaherpesviruses. Analyses of a recombinant murine gammaherpesvirus 68 (MHV68) lacking both of the known gene 50 promoters (G50DblKo) revealed that this mutant retained the ability to replicate in the simian kidney epithelial cell line Vero but not in permissive murine fibroblasts following low-multiplicity infection. However, G50DblKo replication in permissive fibroblasts was partially rescued by high-multiplicity infection. In addition, replication of the G50DblKo virus was rescued by growth on mouse embryonic fibroblasts (MEFs) isolated from IFN-α/βR(−/−) mice, while growth on Vero cells was suppressed by the addition of alpha interferon (IFN-α). 5′ rapid amplification of cDNA ends (RACE) analyses of RNAs prepared from G50DblKo and wild-type MHV68-infected murine macrophages identified three novel gene 50 transcripts initiating from 2 transcription initiation sites located upstream of the currently defined proximal and distal gene 50 promoters. In transient promoter assays, neither of the newly identified gene 50 promoters exhibited sensitivity to IFN-α treatment. Furthermore, in a single-step growth analysis RTA levels were higher at early times postinfection with the G50DblKo mutant than with wild-type virus but ultimately fell below the levels of RTA expressed by wild-type virus at later times in infection. Infection of mice with the MHV68 G50DblKo virus demonstrated that this mutant virus was able to establish latency in the spleen and peritoneal exudate cells (PECs) of C57BL/6 mice with about 1/10 the efficiency of wild-type virus or marker rescue virus. However, despite the ability to establish latency, the G50DblKo virus mutant was severely impaired in its ability to reactivate from either latently infected splenocytes or PECs. Consistent with the ability to rescue replication of the G50DblKo mutant by growth on type I interferon receptor null MEFs, infection of IFN-α/βR(−/−) mice with the G50DblKo mutant virus demonstrated partial rescue of (i) acute virus replication in the lungs, (ii) establishment of latency, and (iii) reactivation from latency. The identification of additional gene 50/RTA transcripts highlights the complex mechanisms involved in controlling expression of RTA, likely reflecting time-dependent and/or cell-specific roles of different gene 50 promoters in controlling virus replication. Furthermore, the newly identified gene 50 transcripts may also act as negative regulators that modulate RTA expression. IMPORTANCE The viral transcription factor RTA, encoded by open reading frame 50 (Orf50), is well conserved among all known gammaherpesviruses and is essential for both virus replication and reactivation from latently infected cells. Previous studies have shown that regulation of gene 50 transcription is complex. The studies reported here describe the presence of additional alternatively initiated, spliced transcripts that encode RTA. Understanding how expression of this essential viral gene product is regulated may identify new strategies for interfering with infection in the setting of gammaherpesvirus-induced diseases