A Novel Two-Channel Continuous-Time Time-Interleaved 3rd-order Sigma- Delta Modulator with Integrator-Sharing Topology

this paper presents a 3rd-order two-path Continuous-Time Time-Interleaved (CTTI) delta-sigma modulator which is implemented in standard 90nm CMOS technology. The architecture uses a novel method to resolve the delayless feedback path issue arising from the sharing of integrators between paths. By exploiting the concept of the time-interleaving techniques and through the use time domain equations, a conventional single path 3rd-order Discrete-Time (DT) ΔΣ modulator is converted into a corresponding two-path Discrete-Time Time-Interleaved (DTTI) counterpart. The equivalent Continuous-Time Time-Interleaved version derived from the DTTI ΔΣ modulator by determining the DT loop filters and converting them to the equivalent Continuous-Time (CT) loop filters through the use of the Impulse Invariant Transformation. Sharing the integrators between two paths of the reported modulator makes it robust to path mismatch effects compared to the typical Time-Interleaved (TI) modulators which have individual integrators in all paths. The modulator achieves a dynamic range of 12 bits with an OverSampling Ratio (OSR) of 16 over a bandwidth of 10MHz and dissipates only 28mW of power from a 1.8-V supply. The clock frequency of the modulator is 320MHz but integrators, quantizers and DACs operate at 160MHz

The study on fishing and resource management of bony fisheries within southern Caspian Sea

The project of the Study on fishing and resource management of fisheries within Southern Caspian Sea was conducted on the base of an agreement made between fisheries organization (Shilat) and the Iranian fishery research organization (IFRO) signed in 2010. In this library-based study the current situation of bony fish fisheries and biology of these species has been surveyed in Iranian waters of the Caspian Sea . In this survey internal and external environmental factors of bony fishes activities were considered. Using SWOT analysis method, current situation of fisheries was investigated..One of the most important strategies for conserving anadromous species such as Caspian kutum , common carp, roach, bream and …. is rehabilitation of the natural spawning ground in rivers, coastal lagoon specially Anzali lagoon .By conducting this strategy not only restocks of bony fishes is done ,but also reduced the cost of artificial restocking programs and releasing fingerlings .In short term , it is nessesary to enhance the stocks of the species that have low catch is done by huge releasing of the fingerlings and study the qualification of the program

Biomass estimation of demersal resources in the Persian Gulf and Oman Sea by Swept Area Method

Regarding to monitor of demersal resources in the Persian Gulf and Oman Sea, and also biomass and CPUA estimation of them, a series of research cruises (5 cruises per year) were carried out by R/V Ferdows-1covering the area from 49 00 E in the west (Khoozestan provice) to 61 25 E in the east (Gwater) in a 5 years program form 2004 up to 2008 (no cruise in 2006). The study area was stratified into 17 strata (A to Q) of which 10 starta (A to J) were in the Persian Gulf and 7 strata (K to Q) were in the Oman Sea, covering the depths of 10-50m in the Persian Gulf and 10-100m in the Oman Sea. A total of 316 stations were randomly selected. The biomass and CPUA were estimated by Swept Area method. The comparison between two regions indicated that the percentage of density of demersal fishes in the Persian Gulf during years 2004, 2005, 2007 and 2008 were 3.3, 3.9, 2.3 and 2.4 times more than the Oman Sea and totally 70-80% of total biomass was calculated for the Persian Gulf. Also a comparison among 17 starta, the highest biomass was found for starta C & D in the Bushehr province waters. The amount of CPUA for both regions of the Persian Gulf and Oman Sea was compared and it was concluded that in years 2004 and 2005, the mean CPUA in the Persian Gulf was partially higher than the Oman Sea with 1.06 & 1.20 times more; and on the contrary for the next two years this value was higher in the Oman Sea with 1.3 times more. The highest CPUA of demersal resources for the Oman Sea belonged to the strata K & O for years 2004, 2007 and 2008 and for year 2005 was for L and strata. It can be concluded that the north-west of Oman Sea has the best condition of biomass of commercial and non-commercial species and the O stratum will be in the second ranking. With review the mean CPUA in different depth-layers for years 2004, 2005, 2007 and 2008, it was concluded that with increasing the depth, the mean CPUA is decreased in which the CPUA values in depth-layer 10-20m for these years were 8.3, 3.0, 2.1 & 1.6 times more than depth-layer 50-100m. The comparison of mean CPUA for 10 strata of the Persian Gulf showed that in years 2004 and 2005, the mean CPUA of demersal fishes in the Hormuzgan province waters was higher than in Bushehr province waters (1.2 times more). In total, the highest maen CPUA belonged to F (Naiband to Mogham) and G (Mogham to Farour) in Hormuzgan waters. On the contrary, in years 2007 and 2008 this value in Bushehr waters was 1.3 times higher than western part of Hormuzgan waters with the highest value in D stratum(Boordekhoon to Dayyer). Also the comparison of mean CPUA for different depth-layers, it was found that the mean CPUA has ascending trend with increasing the depth, with the highest value in depth-laer of 30-50m in which contains the 55-68% of total biomass. The lowest biomass is found in depth-layers of 10-30m. Totally, the minimum CPUA and biomass for both commercial and non-commercial species belonged to a stratum located in Khouzestan province waters and it was shown the over-exploitation of resources in this area. The comparison between commercial and non-commercial groups in both ecosystems , it was concluded that the density of commercial species was higher than non-commercial ones , and in all years the Persian Gulf indicated higher values than the Oman Sea

Ecological interaction between commercial fishes in the Persian Gulf

An ecosystem-based management fishery is a new way of looking at management of living resources. Trophic levels of basic food items, feeding habits, growth and mortality rate of 20 exploited fish species (including commercial and bycatch) are investigated in the Persian Gulf (from the provinces of Khuzestan, Bushehr and Hormozgan) from 2010 to 2012. The model considers trophic interactions among 12 functional group of the ecosystem involving Phytoplankton, Zeoplankton, Cephalopods, Shrimp, Infauna Benthos, Epifaunal Macrobenthos, Demersal Zoobenthos Feeders, Small Pelagic Planktivorous Fish, Benthoplagic Feeder, Piscivorous, Large Benthic Carnivores And Small Benthic Carnivores. In general 7452 of stomach contents samples were analyzed based on the weight and numerical method and were detected about 40 preys. The results demonstrated gaps in our knowledge on the food web structure. The mean trophic levels were varied from L. klunzingeri (2) to S. tumbil (4.64), while the total catch of some species were fluctuating widely. Result of our study showed that Total mortality varied between 0.45 per year (A. suppositus) to 9.5 per year (P. indicus) and food consumption rate also fluctuated by 1.9 (L. johni ) to 89 (L. lineolatus). The results indicated that some fish species including sardine, Anchovies, small carangids, S. stridens with high frequency in ecosystem, have been occupied in the food web as a wasp-waist. The model showed that most hunters groups live in middle levels in the food web such as N. japonicas, A. latus, P. kaakan, L. nebolusus, P. indicus and T. lepturus . Analysis the catch rate during 2001-2011 reveled that there is a clear trend of declining most of fish species catches in this research except for T. lepturus, P. kaakan and sparids which lead to upset the fundamental ecological balance of the Persian Gulf in future

Study on the growth status of mullets with viral nervous necrosis disease in the southern Caspian Sea

Mullet and mullet products have considerable economic importance at a regional level, especially around the Caspian Sea. The leaping mullet constitutes an important part of their production. This study is the first detailed work on the age and growth of the leaping mullet (Liza saliens) from September 2012 to March 2013 in the Southern coast of the Caspian Sea. Age and growth determinations were based upon the scale samples taken from 102 fish. Marginal increment analysis was used to validate age determination. The back-calculated lengths stage estimated from the scale showed no differences between in this study. The maximum age of leaping mullet in the Southern coast of the Caspian Sea was 5 years for males and 6 years for females. The von Bertalanffy growth functions were Lt=30.415(1-e-0.275(t+0.645)) for males and Lt=34.832(1-e 0.211(t+1.009)) for females. A large spread and length overlap characterized the age groups. The estimated Length Weight relationships were common for the two sexes (W=0.079L3 ). The slope (b) values of the length-weight relationship showed that weight of leaping grey mullet in Mazandaran increased associated with length in isometric. The mean condition factor for males, females and all specimens were determined as 0.908, 0.900 and 0.897, respectively. According to sex groups, the mean condition factor of males was slightlyhigher than that of females. The total length for leaping grey mullet was determined as 23.3 cm

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

Impact of ICRF on the scrape-off layer and on plasma wall interactions: From present experiments to fusion reactor

Recent achievements in studies of the effects of ICRF (Ion Cyclotron Range of Frequencies) power on the SOL (Scrape-Off Layer) and PWI (Plasma Wall Interactions) in ASDEX Upgrade (AUG), Alcator C-Mod, and JET-ILW are reviewed. Capabilities to diagnose and model the effect of DC biasing and associated impurity production at active antennas and on magnetic field connections to antennas are described. The experiments show that ICRF near-fields can lead not only to E×B convection, but also to modifications of the SOL density, which for Alcator C-Mod are limited to a narrow region near antenna. On the other hand, the SOL density distribution along with impurity sources can be tailored using local gas injection in AUG and JET-ILW with a positive effect on reduction of impurity sources. The technique of RF image current cancellation at antenna limiters was successfully applied in AUG using the 3-strap AUG antenna and extended to the 4-strap Alcator C-Mod field-aligned antenna. Multiple observations confirmed the reduction of the impact of ICRF on the SOL and on total impurity production when the ratio of the power of the central straps to the total antenna power is in the range 0.6<P$_{cen}$/P$_{total}$<0.8. Near-field calculations indicate that this fairly robust technique can be applied to the ITER ICRF antenna, enabling the mode of operation with reduced PWI. On the contrary, for the A2 antenna in JET-ILW the technique is hindered by RF sheaths excited at the antenna septum. Thus, in order to reduce the effect of ICRF power on PWI in a future fusion reactor, the antenna design has to be optimized along with design of plasmafacing components

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray (EDX), Transmission Electron microscopy (TEM) equipped with EDX and Electron Energy Loss Spectroscopy (EELS), Raman Spectroscopy and Thermal Desorption Spectroscopy (TDS). This paper focuses on results from melted materials of the dump plate tiles in JET. From our results and the literature, it is concluded, beryllium can form micron deep oxide islands contrary to the nanometric oxides predicted under vacuum conditions. The deepest oxides analyzed were up to 2-micron thicknesses. The beryllium Deuteroxide (BeOxDy) bond was found with Raman Spectroscopy. Application of EELS confirmed the oxide presence and stoichiometry. Literature suggests these oxides form at temperatures greater than 700 °C where self-diffusion of beryllium ions through the surface oxide layer can occur. Further oxidation is made possible between oxygen plasma impurities and the beryllium ions now present at the wall surface. Under Ultra High Vacuum (UHV) nanometric Beryllium oxide layers are formed and passivate at room temperature. After continual cyclic heating (to the point of melt formation) in the presence of oxygen impurities from the plasma, oxide growth to the levels seen experimentally (approximately two microns) is proposed. This retention mechanism is not considered to contribute dramatically to overall retention in JET, due to low levels of melt formation. However, this mechanism, thought the result of operation environment and melt formation, could be of wider concern to ITER, dependent on wall temperatures

Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings

The erosion, transport and deposition of tungsten in the outer divertor of JET-ILW has been studied for an HMode discharge with low frequency ELMs. For this specific case with an inter-ELM electron temperature at the strike point of about 20 eV, tungsten sputtering between ELMs is almost exclusively due to beryllium impurity and self-sputtering. However, during ELMs tungsten sputtering due to deuterium becomes important and even dominates. The amount of simulated local deposition of tungsten relative to the amount of sputtered tungsten in between ELMs is very high and reaches values of 99% for an electron density of 5E13 cm$^{-3}$ at the strike point and electron temperatures between 10 and 30 eV. Smaller deposition values are simulated with reduced electron density. The direction of the B-field significantly influences the local deposition and leads to a reduction if the E×B drift directs towards the scrape-off-layer. Also, the thermal force can reduce the tungsten deposition, however, an ion temperature gradient of about 0.1 eV/mm or larger is needed for a significant effect. The tungsten deposition simulated during ELMs reaches values of about 98% assuming ELM parameters according to free-streaming model. The measured WI emission profiles in between and within ELMs have been reproduced by the simulation. The contribution to the overall net tungsten erosion during ELMs is about 5 times larger than the one in between ELMs for the studied case. However, this is due to the rather low electron temperature in between ELMs, which leads to deuterium impact energies below the sputtering threshold for tungsten