Bidirectional flow meter

Device provides wide variety of flow metering on a volume demand basis, in either of two directions. Flow is controlled by number, locations, and sizes of orifices and O-rings. Device is useful in pneumatic or hydraulic systems where valve sequence and timing functions vary from point to point

Low Cost Solar Array Project: Composition Measurements by Analytical Photon Catalysis

The applicability of the photon catalysis technique for effecting composition analysis of silicon samples was assessed. Third quarter activities were devoted to the study of impurities in silicon matrices. The evaporation process was shown to be congruent; thus, the spectral analysis of the vapor yields the composition of the bulk sample. Qualitative analysis of metal impurities in silicon was demonstrated e part per million level. Only one atomic spectral interference was noted; however, it is imperative to maintain a leak tight system due to chemical and spectral interferences caused by the presence of even minute amounts of oxygen in the active nitrogen afterglow

A Model for Phase Transition based on Statistical Disassembly of Nuclei at Intermediate Energies

Consider a model of particles (nucleons) which has a two-body interaction which leads to bound composites with saturation properties. These properties are : all composites have the same density and the ground state energies of composites with k nucleons are given by -kW+\sigma k^{2/3} where W and \sigma are positive constants. W represents a volume term and \sigma a surface tension term. These values are taken from nuclear physics. We show that in the large N limit where N is the number of particles such an assembly in a large enclosure at finite temperature shows properties of liquid-gas phase transition. We do not use the two-body interaction but the gross properties of the composites only. We show that (a) the p-\rho isotherms show a region where pressure does not change as $\rho$ changes just as in Maxwell construction of a Van der Waals gas, (b) in this region the chemical potential does not change and (c) the model obeys the celebrated Clausius-Clapeyron relations. A scaling law for the yields of composites emerges. For a finite number of particles N (upto some thousands) the problem can be easily solved on a computer. This allows us to study finite particle number effects which modify phase transition effects. The model is calculationally simple. Monte-Carlo simulations are not needed.Comment: RevTex file, 21 pages, 5 figure

Heat and Corrosion-Resistant Alloy Castings of the United States of America

THIS paper will summarize the properties, design considerations and uses of cast heat and corrosion-resistant alloys. Obviously, it is not possible to cover in detail the almost limitless fields involved and, therefore, it must be borne in mind that the purpose of this paper is to point out the more important aspects of the overall problem of material selection

Upper Limits from Counting Experiments with Multiple Pipelines

In counting experiments, one can set an upper limit on the rate of a Poisson process based on a count of the number of events observed due to the process. In some experiments, one makes several counts of the number of events, using different instruments, different event detection algorithms, or observations over multiple time intervals. We demonstrate how to generalize the classical frequentist upper limit calculation to the case where multiple counts of events are made over one or more time intervals using several (not necessarily independent) procedures. We show how different choices of the rank ordering of possible outcomes in the space of counts correspond to applying different levels of significance to the various measurements. We propose an ordering that is matched to the sensitivity of the different measurement procedures and show that in typical cases it gives stronger upper limits than other choices. As an example, we show how this method can be applied to searches for gravitational-wave bursts, where multiple burst-detection algorithms analyse the same data set, and demonstrate how a single combined upper limit can be set on the gravitational-wave burst rate.Comment: 26 pages (CQG style), 8 figures. Added study of robustness of limits

Journal publishing with Acrobat: the CAJUN project

The publication of material in electronic form should ideally preserve, in a unified document representation, all of the richness of the printed document while maintaining enough of its underlying structure to enable searching and other forms of semantic processing. Until recently it has been hard to find a document representation which combined these attributes and which also stood some chance of becoming a de facto multi-platform standard. This paper sets out experience gained within the Electronic Publishing Research Group at the University of Nottingham in using Adobe Acrobat software and its underlying PDF (Portable Document Format) notation. The CAJUN project1 (CD-ROM Acrobat Journals Using Networks) began in 1993 and has used Acrobat software to produce electronic versions of journal papers for network and CD-ROM dissemination. The paper describes the project's progress so far and also gives a brief assessment of PDF's suitability as a universal document interchange standard

A High-Mass Protobinary System in the Hot Core W3(H2O)

We have observed a high-mass protobinary system in the hot core W3(H2O) with the BIMA Array. Our continuum maps at wavelengths of 1.4mm and 2.8mm both achieve sub-arcsecond angular resolutions and show a double-peaked morphology. The angular separation of the two sources is 1.19" corresponding to 2.43X10^3 AU at the source distance of 2.04 kpc. The flux densities of the two sources at 1.4mm and 2.8mm have a spectral index of 3, translating to an opacity law of kappa ~ nu. The small spectral indices suggest that grain growth has begun in the hot core. We have also observed 5 K components of the CH3CN (12-11) transitions. A radial velocity difference of 2.81 km/s is found towards the two continuum peaks. Interpreting these two sources as binary components in orbit about one another, we find a minimum mass of 22 Msun for the system. Radiative transfer models are constructed to explain both the continuum and methyl cyanide line observations of each source. Power-law distributions of both density and temperature are derived. Density distributions close to the free-fall value, r^-1.5, are found for both components, suggesting continuing accretion. The derived luminosities suggest the two sources have equivalent zero-age main sequence (ZAMS) spectral type B0.5 - B0. The nebular masses derived from the continuum observations are about 5 Msun for source A and 4 Msun for source C. A velocity gradient previously detected may be explained by unresolved binary rotation with a small velocity difference.Comment: 38 pages, 9 figures, accepted by The Astrophysical Journa

Test Results of the RS-44 Integrated Component Evaluator Liquid Oxygen/Hydrogen Rocket Engine

An advanced LOX/LH2 expander cycle rocket engine, producing 15,000 lbf thrust for Orbital Transfer Vehicle missions, was tested to determine ignition, transition, and main stage characteristics. Detail design and fabrication of the pump fed RS44 integrated component evaluator (ICE) was accomplished using company discretionary resources and was tested under this contracted effort. Successful demonstrations were completed to about the 50 percent fuel turbopump power level (87,000 RPM), but during this last test, a high pressure fuel turbopump (HPFTP) bearing failed curtailing the test program. No other hardware were affected by the HPFTP premature shutdown. The ICE operations matched well with the predicted start transient simulations. The tests demonstrated the feasibility of a high performance advanced expander cycle engine. All engine components operated nominally, except for the HPFTP, during the engine hot-fire tests. A failure investigation was completed using company discretionary resources