1,744 research outputs found
A lightweight, high output soil sampler
Sampler is useful on or under earth's surface or on sea bottom. Larger sample amount is obtained relative to sampler size and weight and limited particle size sample material is continuously delivered. Silicone rubber linear in transport tube nearly eliminates grinding or particulate processing during sampling, and reduces required torque
Recommended from our members
Gene expression-based screening for inhibitors of PDGFR signaling
Inhibitors of the platelet derived growth factor receptor (PDGFR) signaling pathway are isolated using gene expression-based high-throughput screening (GE-HTS), a method that is applicable to other pathways
Field measurements of trace gases and aerosols emitted by peat fires in Central Kalimantan, Indonesia, during the 2015 El Nino
Abstract. Peat fires in Southeast Asia have become a major annual source of trace gases and particles to the regional–global atmosphere. The assessment of their influence on atmospheric chemistry, climate, air quality, and health has been uncertain partly due to a lack of field measurements of the smoke characteristics. During the strong 2015 El Niño event we deployed a mobile smoke sampling team in the Indonesian province of Central Kalimantan on the island of Borneo and made the first, or rare, field measurements of trace gases, aerosol optical properties, and aerosol mass emissions for authentic peat fires burning at various depths in different peat types. This paper reports the trace gas and aerosol measurements obtained by Fourier transform infrared spectroscopy, whole air sampling, photoacoustic extinctiometers (405 and 870 nm), and a small subset of the data from analyses of particulate filters. The trace gas measurements provide emission factors (EFs; grams of a compound per kilogram biomass burned) for up to ∼ 90 gases, including CO2, CO, CH4, non-methane hydrocarbons up to C10, 15 oxygenated organic compounds, NH3, HCN, NOx, OCS, HCl, etc. The modified combustion efficiency (MCE) of the smoke sources ranged from 0.693 to 0.835 with an average of 0.772 ± 0.053 (n = 35), indicating essentially pure smoldering combustion, and the emissions were not initially strongly lofted. The major trace gas emissions by mass (EF as g kg−1) were carbon dioxide (1564 ± 77), carbon monoxide (291 ± 49), methane (9.51 ± 4.74), hydrogen cyanide (5.75 ± 1.60), acetic acid (3.89 ± 1.65), ammonia (2.86 ± 1.00), methanol (2.14 ± 1.22), ethane (1.52 ± 0.66), dihydrogen (1.22 ± 1.01), propylene (1.07 ± 0.53), propane (0.989 ± 0.644), ethylene (0.961 ± 0.528), benzene (0.954 ± 0.394), formaldehyde (0.867 ± 0.479), hydroxyacetone (0.860 ± 0.433), furan (0.772 ± 0.035), acetaldehyde (0.697 ± 0.460), and acetone (0.691 ± 0.356). These field data support significant revision of the EFs for CO2 (−8 %), CH4 (−55 %), NH3 (−86 %), CO (+39 %), and other gases compared with widely used recommendations for tropical peat fires based on a lab study of a single sample published in 2003. BTEX compounds (benzene, toluene, ethylbenzene, xylenes) are important air toxics and aerosol precursors and were emitted in total at 1.5 ± 0.6 g kg−1. Formaldehyde is probably the air toxic gas most likely to cause local exposures that exceed recommended levels. The field results from Kalimantan were in reasonable agreement with recent lab measurements of smoldering Kalimantan peat for “overlap species,” lending importance to the lab finding that burning peat produces large emissions of acetamide, acrolein, methylglyoxal, etc., which were not measurable in the field with the deployed equipment and implying value in continued similar efforts. The aerosol optical data measured include EFs for the scattering and absorption coefficients (EF Bscat and EF Babs, m2 kg−1 fuel burned) and the single scattering albedo (SSA) at 870 and 405 nm, as well as the absorption Ångström exponents (AAE). By coupling the absorption and co-located trace gas and filter data we estimated black carbon (BC) EFs (g kg−1) and the mass absorption coefficient (MAC, m2 g−1) for the bulk organic carbon (OC) due to brown carbon (BrC). Consistent with the minimal flaming, the emissions of BC were negligible (0.0055 ± 0.0016 g kg−1). Aerosol absorption at 405 nm was ∼ 52 times larger than at 870 nm and BrC contributed ∼ 96 % of the absorption at 405 nm. Average AAE was 4.97 ± 0.65 (range, 4.29–6.23). The average SSA at 405 nm (0.974 ± 0.016) was marginally lower than the average SSA at 870 nm (0.998 ± 0.001). These data facilitate modeling climate-relevant aerosol optical properties across much of the UV/visible spectrum and the high AAE and lower SSA at 405 nm demonstrate the dominance of absorption by the organic aerosol. Comparing the Babs at 405 nm to the simultaneously measured OC mass on filters suggests a low MAC ( ∼ 0.1) for the bulk OC, as expected for the low BC/OC ratio in the aerosol. The importance of pyrolysis (at lower MCE), as opposed to glowing (at higher MCE), in producing BrC is seen in the increase of AAE with lower MCE (r2 = 0.65)
Measurements of elastohydrodynamic film thickness, wear and tempering behavior of high pressure oxygen turbopump bearings
The reusable design of the Space Shuttle requires a target life of 7.5 hours for the turbopumps of the Space Shuttle main engine (SSME). This large increase from the few hundred seconds required in single-use rockets has caused various problems with the bearings of the turbopumps. The berings of the high pressure oxygen turbopump (HPOTP) were of particular concern because of wear, spalling, and cage failures at service time well below the required 7.5 hours. Lubrication and wear data were developed for the bearings. Since the HPOTP bearings operate in liquid oxygen, conventional liquid lubricants cannot be applied. Therefore, solid lubricant coatings and lubricant transfer from the polytetrafluorethylene (FTFE) cage were the primary lubrication approaches for the bearings. Measurements were made using liquid nitrogen in a rolling disk machine to determine whether usable elastohydrodynamic films could be generated to assist in the bearing lubrication
Production of Secondary Organic Aerosol During Aging of Biomass Burning Smoke From Fresh Fuels and Its Relationship to VOC Precursors
After smoke from burning biomass is emitted into the atmosphere, chemical and physical processes change the composition and amount of organic aerosol present in the aged, diluted plume. During the fourth Fire Lab at Missoula Experiment, we performed smog-chamber experiments to investigate formation of secondary organic aerosol (SOA) and multiphase oxidation of primary organic aerosol (POA). We simulated atmospheric aging of diluted smoke from a variety of biomass fuels while measuring particle composition using high-resolution aerosol mass spectrometry. We quantified SOA formation using a tracer ion for low-volatility POA as a reference standard (akin to a naturally occurring internal standard). These smoke aging experiments revealed variable organic aerosol (OA) enhancements, even for smoke from similar fuels and aging mechanisms. This variable OA enhancement correlated well with measured differences in the amounts of emitted volatile organic compounds (VOCs) that could subsequently be oxidized to form SOA. For some aging experiments, we were able to predict the SOA production to within a factor of 2 using a fuel-specific VOC emission inventory that was scaled by burn-specific toluene measurements. For fires of coniferous fuels that were dominated by needle burning, volatile biogenic compounds were the dominant precursor class. For wiregrass fires, furans were the dominant SOA precursors. We used a POA tracer ion to calculate the amount of mass lost due to gas-phase oxidation and subsequent volatilization of semivolatile POA. Less than 5% of the POA mass was lost via multiphase oxidation-driven evaporation during up to 2 hr of equivalent atmospheric oxidation
Beer, wine and distilled spirits in Ontario: A comparison of recent policies, regulations and practices
AIMS: There is a long-standing discussion about whether some beverages are more likely to be linked with high-risk drinking and damage than others, and implications for beverage specific alcohol policies. While the evidence is inconclusive, when controlling for individual consumption, some studies have shown elevated risks by beverage type. This paper examines the situation in Ontario, Canada, from 1995 to present (2011) on several dimensions in order to assess the differences by beverage and their rationale with a specific focus on the most recent policies. METHODS: This paper draws on archival consumption statistics, taxation and pricing arrangements, and retailing and marketing practices. RESULTS: Off-premise sales, which represent an estimated 75% of ethanol, involve several channels: stores controlled by the Liquor Control Board (LCBO) - which sell all spirits, imported and domestic wines, and beer products; the Beer Store network which sell all beers; and Ontario winery stores - which sell Ontario wines. In LCBO stores Ontario wines are more prominently displayed than other beverages, and extensive print advertising tends to feature wine over beer and spirits. There are also differences by beverage in terms of taxation and price. The taxes on higher alcohol content beverage types account for a higher portion of the retail price than taxes on lower alcohol content beverage types. Furthermore, minimum price regulations allow for differential minimum pricing per standard drink [17.05 ml ethanol] across beverage types. CONCLUSIONS: The apparent rationale for these arrangements is not primarily that of favouring lighter-strength beverages in order to reduce harm, but rather to accommodate long-standing vested interests which are primarily financially based
Using digital and hand printing techniques to compensate for loss: re-establishing colour and texture in historic textiles
Conservators use a range of 'gap filling' techniques to improve the structural stability and presentation of objects. Textile conservators often use fabric supports to provide reinforcement for weak areas of a textile and to provide a visual infill in missing areas. The most common technique is to use dyed fabrics of a single colour but while a plain dyed support provides good reinforcement, it can be visually obtrusive when used with patterned or textured textiles. Two recent postgraduate dissertation projects at the Textile Conservation Centre (TCC) have experimented with hand printing and digital imaging techniques to alter the appearance of support fabrics so that they are less visually obtrusive and blend well with the colour and texture of the textile being supported. Case studies demonstrate the successful use of these techniques on a painted hessian rocking horse and a knitted glove from an archaeological context
Reading Dickens’s characters: employing psycholinguistic methods to investigate the cognitive reality of patterns in texts
This article reports the findings of an empirical study that uses eye-tracking and follow-up interviews as methods to investigate how participants read body language clusters in novels by Charles Dickens. The study builds on previous corpus stylistic work that has identified patterns of body language presentation as techniques of characterisation in Dickens (Mahlberg, 2013). The article focuses on the reading of ‘clusters’, that is, repeated sequences of words. It is set in a research context that brings together observations from both corpus linguistics and psycholinguistics on the processing of repeated patterns. The results show that the body language clusters are read significantly faster than the overall sample extracts which suggests that the clusters are stored as units in the brain. This finding is complemented by the results of the follow-up questions which indicate that readers do not seem to refer to the clusters when talking about character information, although they are able to refer to clusters when biased prompts are used to elicit information. Beyond the specific results of the study, this article makes a contribution to the development of complementary methods in literary stylistics and it points to directions for further subclassifications of clusters that could not be achieved on the basis of corpus data alone
- …