Parity restoration in the Highly Truncated Diagonalization Approach: application to the outer fission barrier of 240^{240}Pu

The restoration of the parity symmetry has been performed in the framework of the Highly Truncated Diagonalization Approach suited to treat correlations in an explicitly particle-number conserving microscopic approach. To do so we have assumed axial symmetry and used a generalized Wick's theorem due to L\"owdin in a projection-after-variation scheme. We have chosen the Skyrme SkM$^*$ energy-density functional for the particle-hole channel and a density-independent delta force for the residual interaction. We have applied this approach in the region of the outer fission barrier of the $^{240}$Pu nucleus. As a result, we have shown that the $K^{\pi} = 0^+$ fission isomeric state is statically unstable against intrinsic-parity breaking modes, while the projection does not affect the energy at the top of the intrinsic outer fission barrier. Altogether, this leads to an increase of the height of the outer fission barrier--with respect to the fission isomeric state--by about 350 keV, affecting thus significantly the fission-decay lifetime of the considered fission isomer

Generation of pulsed bipartite entanglement using four-wave mixing

Using four-wave mixing in a hot atomic vapor, we generate a pair of entangled twin beams in the microsecond pulsed regime near the D1 line of $^{85}$Rb, making it compatible with commonly used quantum memory techniques. The beams are generated in the bright and vacuum-squeezed regimes, requiring two separate methods of analysis, without and with local oscillators, respectively. We report a noise reduction of up to $3.8\pm 0.2$ dB below the standard quantum limit in the pulsed regime and a level of entanglement that violates an Einstein--Podolsky--Rosen inequality.Comment: 10 pages, 5 figures, accepted for publication in New Journal Of Physici

Speed and Temperature Effects in the Energy Absorption of Axially Crushed Composite Tubes

The original thesis was written in 1989/90 on a Macintosh Plus with a processor at 8 Mhz and 2.5 Mb of RAM; it was written using Micro$oft Word Version 4 for the Macintosh and all of the figures, with the exception of the photographs, were included. Significant changes in computer technology have occurred in the years between the writing and the generation of this electronic copy in 2008, there have been some problems with backward compatibility of the software used, in particular with respect to the graphics handling capability, so there have been some significant problems with the use of old file formats; consequently not all of the figures are as clear as they were when the original was written.Tubes of glass reinforced thermosetting resins have been tested in axial compression between steel platens with one end chamfered to prevent critically high loads causing catastrophic centre failure. By testing in such a manner these tubes crush in a progressive and controlled manner, and are capable of exhibiting high levels of energy absorption, particularly when related to the material mass involved. Polymers are known to display viscoelastic behaviour and polymer composites are similarly sensitive to test speed and temperature. Energy absorption in tube crushing has been shown to be speed and temperature sensitive and the purpose of this project has been to understand the variability of the energy absorption and the associated mechanisms. The main aim has been to show how the two variables interrelate. The materials used have been produced by hot rolling of pre-preg cloth or by resinjection into closed moulds. Reinforcement has consisted of woven glass cloth or random glass mat; matrix materials have been epoxy and polyester resins. Trends to higher values of specific energy absorption with increasing speed have been observed for epoxy matrix tubes, while polyester matrix tubes have shown less certain trends and give lower values of specific energy absorption at high speeds. All the tubes have shown a rapid drop in specific energy absorption with increasing temperature above normal room temperature, with changes in crush mode being very apparent. At temperatures in excess of about 100 degrees C the tubes have failed by centre buckling, the transition temperature from normal crushing to buckling being sensitive to the crush speed. The interrelation between speed and temperature effects has been examined. Three factors that prevent simple interrelation have been identified; these are inertial effects of crush debris, residual stresses in the hoop direction of the tube and frictional heating in the crush zone. Speed sensitivity of the energy absorption has been determined over a range of temperatures and various features of these responses related to the responses of the material properties. Frictional temperature rises have been modelled mathematically and the predictions have been shown to be reasonably consistent with experimental measurements. These temperature rises have been shown to be important in determining the speed sensitive behaviour of the energy absorption levels, particularly for polyester resin matrix tubes tested at high speeds

Ultra-Low-Power Superconductor Logic

We have developed a new superconducting digital technology, Reciprocal Quantum Logic, that uses AC power carried on a transmission line, which also serves as a clock. Using simple experiments we have demonstrated zero static power dissipation, thermally limited dynamic power dissipation, high clock stability, high operating margins and low BER. These features indicate that the technology is scalable to far more complex circuits at a significant level of integration. On the system level, Reciprocal Quantum Logic combines the high speed and low-power signal levels of Single-Flux- Quantum signals with the design methodology of CMOS, including low static power dissipation, low latency combinational logic, and efficient device count.Comment: 7 pages, 5 figure

Signals for Lorentz Violation in Post-Newtonian Gravity

The pure-gravity sector of the minimal standard-model extension is studied in the limit of Riemann spacetime. A method is developed to extract the modified Einstein field equations in the limit of small metric fluctuations about the Minkowski vacuum, while allowing for the dynamics of the 20 independent coefficients for Lorentz violation. The linearized effective equations are solved to obtain the post-Newtonian metric. The corresponding post-Newtonian behavior of a perfect fluid is studied and applied to the gravitating many-body system. Illustrative examples of the methodology are provided using bumblebee models. The implications of the general theoretical results are studied for a variety of existing and proposed gravitational experiments, including lunar and satellite laser-ranging, laboratory experiments with gravimeters and torsion pendula, measurements of the spin precession of orbiting gyroscopes, timing studies of signals from binary pulsars, and the classic tests involving the perihelion precession and the time delay of light. For each type of experiment considered, estimates of the attainable sensitivities are provided. Numerous effects of local Lorentz violation can be studied in existing or near-future experiments at sensitivities ranging from parts in 104 down to parts in 1015

Lorentz-Violating Electrostatics and Magnetostatics

The static limit of Lorentz-violating electrodynamics in vacuum and in media is investigated. Features of the general solutions include the need for unconventional boundary conditions and the mixing of electrostatic and magnetostatic effects. Explicit solutions are provided for some simple cases. Electromagnetostatics experiments show promise for improving existing sensitivities to parity-odd coefficients for Lorentz violation in the photon sector.Comment: 9 page

Klein-tunneling transistor with ballistic graphene

Today the availability of high mobility graphene up to room temperature makes ballistic transport in nanodevices achievable. In particular, p-n-p transistor in the ballistic regime gives access to the Klein tunneling physics and allows the realization of devices exploiting the optics-like behavior of Dirac Fermions (DF) as in the Vesalego lens or the Fabry P\'erot cavity. Here we propose a Klein tunneling transistor based on geometrical optics of DF. We consider the case of a prismatic active region delimited by a triangular gate, where total internal reflection may occur, which leads to the tunable suppression of the transistor transmission. We calculate the transmission and the current by means of scattering theory and the finite bias properties using Non Equilibrium Green's Function(NEGF) simulation.Comment: 4 pages, 5 figure