Illegal births and legal abortions – the case of China

BACKGROUND: China has a national policy regulating the number of children that a woman is allowed to have. The central concept at the individual level application is "illegal pregnancy". The purpose of this article is to describe and problematicize the concept of illegal pregnancy and its use in practice. METHODS: Original texts and previous published and unpublished reports and statistics were used. RESULTS: By 1979 the Chinese population policy was clearly a policy of controlling population growth. For a pregnancy to be legal, it has to be defined as such according to the family-level eligibility rules, and in some places it has to be within the local quota. Enforcement of the policy has been pursued via the State Family Planning (FP) Commission and the Communist Party (CP), both of which have a functioning vertical structure down to the lowest administrative units. There are various incentives and disincentives for families to follow the policy. An extensive system has been created to keep the contraceptive use and pregnancy status of all married women at reproductive age under constant surveillance. In the early 1990s FP and CP officials were made personally responsible for meeting population targets. Since 1979, abortion has been available on request, and the ratio of legal abortions to birth increased in the 1980s and declined in the 1990s. Similar to what happens in other Asian countries with low fertility rates and higher esteem for boys, both national- and local-level data show that an unnaturally greater number of boys than girls are registered as having been born. CONCLUSION: Defining a pregnancy as "illegal" and carrying out the surveillance of individual women are phenomena unique in China, but this does not apply to other features of the policy. The moral judgment concerning the policy depends on the basic question of whether reproduction should be considered as an individual or social decision

Knowledge and attitude on maternal health care among rural-to-urban migrant women in Shanghai, China

<p>Abstract</p> <p>Background</p> <p>In China, with the urbanization, women migrated from rural to big cities presented much higher maternal mortality rates than local residents. Health knowledge is one of the key factors enabling women to be aware of their rights and health status in order to seek appropriate health services. This study aims to assess the knowledge and attitude on maternal health care and the contributing factors to being knowledgeable among rural-to-urban migrant women in Shanghai.</p> <p>Methods</p> <p>A cross-sectional study was conducted in a district center hospital in Shanghai where migrants gathered. Totally 475 rural-to-urban migrant pregnant women were interviewed and completed the self-administered questionnaire after obtaining informed consent.</p> <p>Results</p> <p>The mean score of knowledge on maternal health care was 8.28 out of 12. However, only 36.6% women had attended the required 5 antenatal checks, and 58.3% of the subjects thought financial constrains being the main reason for not attending antenatal care. It was found that higher level of education (OR = 3.3, 95%CI: 1.8–3.8), husbands' Shanghai residence (OR = 4.0, 95%CI: 1.3–12.1) and better family income (OR = 3.3, 95%CI: 1.4–8.2) were associated with better knowledge.</p> <p>Conclusions</p> <p>Rural-to-urban migrant women's unawareness of maternal health service, together with their vulnerable living status, influences their utilization of maternal health care. Tailored maternal health education and accessible services are in demands for this population.</p

Inmobilization of Zn(II) in Portland cement pastes. Determination of microstructure and leaching performance

The aim of this paper is to study the solidification/ stabilization potential of cementitious matrices on the immobilization of Zn(II) before its disposal into the environment by determining the mechanisms of interaction between the Zn(II) ions and the binder. The results of structural and mineralogical characterization of cement pastes formed with different amounts of immobilized Zn(II) ions are presented and the study includes results from thermogravimetric analysis (TG), scanning electron microscopy, X-ray diffraction, and leaching performance. Zn(II) ions delay the hydration reaction of Portland cement due to the formation of mainly CaZn2(OH)6 2H2O , as well as Zn5(CO3)2(OH)6, Zn(OH)2, and ZnCO3 in minor proportion. Correlations between total mass loss in TG analysis and leached Zn(II) ions in long-term curing pastes have been obtained. This result is important because in a preliminary approach from a TG on an early-aged cement paste containing Zn(II), it could be possible to perform an estimation of the amount of Zn(II) ions that could be leached, thus avoiding costly and time-consuming tests.Mellado Romero, AM.; Borrachero Rosado, MV.; Soriano Martinez, L.; Paya Bernabeu, JJ.; Monzó Balbuena, JM. (2013). Inmobilization of Zn(II) in Portland cement pastes. Determination of microstructure and leaching performance. Journal of Thermal Analysis and Calorimetry. 112(3):1377-1389. doi:10.1007/s10973-012-2705-8S137713891123Mojumdar SC, Sain M, Prasad RC, Sun L, Venart JES. Selected thermoanalytical methods and their applications from medicine to construction, Part I. J Therm Anal Calorim. 2007;90:653–62.Perraki M, Perraki T, Kolovos K, Tsivilis S, Kakali G. Secondary raw materials in cement industry. Evaluation of their effect on the sintering and hydration processes by thermal analysis. J Therm Anal Calorim. 2002;70:143–50.Neves A, Dias Toledo R, de Moraes Rego E, Dweck J. Early stages hydration of high initial strength Portland cement. Part I. Thermogravimetric analysis on calcined mass basis. J Therm Anal Calorim. 2012;108:725–31. doi: 10.1007/s10973-012-2256-z .Balek V, Bydžovský J, Dufka A, Drochytka R, Beckman IN. Use of emanation thermal analysis to characterize microstructure development during Portland cement hydration. J Therm Anal Calorim. 2012. doi: 10.1007/s10973-012-2314-6 .Zhang Q, Ye G. Dehydration kinetics of Portland cement paste at high temperature. J Therm Anal Calorim. 2012. doi: 10.1007/s10973-012-2303-9 .Menéndez E, Vega L, Andrade C. Use of decomposition of portlandite in concrete fire as indicator of temperature progression into the material. Application to fire-affected builds. J Therm Anal Calorim. 2012. doi: 10.1007/s10973-011-2159-4 .Galan I, Andrade C, Castellote M. Thermogravimetrical analysis for monitoring carbonation of cementitious materials. Uptake of CO2 and deepening in C–S–H knowledge. J Therm Anal Calorim. 2012. doi: 10.1007/s10973-012-2466-4 .Batchelor B. Overview of waste stabilization with cement. Waste Manag (Oxford). 2006;26:689–98.Gineys N, Aouad G, Damidot D. Managing trace elements in Portland cement-Part I: interactions between cement paste and heavy metals added during mixing as soluble salts. Cem Concr Compos. 2010;32:563–70.Erdem M, Özverdi A. Environmental risk assessment and stabilization/solidification of zinc extraction residue: II. Stabilization/solidification. Hydrometallurgy. 2011;105:270–6.Nocuń-Wczelik W, Małolepszy J. Application of calorimetry in studies of the immobilization of heavy metals in cementitious materials. Thermochim Acta. 1995;269(270):613–9.Dweck J, Buchler PM, Cartledge FK. The effect of different bentonites on cement hydration during solidification/stabilization of tannery wastes. J Therm Anal Calorim. 2001;64:1011–6.Melchert MBM, Viana MM, Lemos MS, Dweck J, Buchler PM. Simultaneous solidification of two catalyst wastes and their effect on the early stages of cement hydration. J Therm Anal Calorim. 2011;105:625–33.Vessalas K, Thomas PS, Ray AS, Guerbois JP, Joyce P, Haggman J. Pozzolanic reactivity of the supplementary cementitious material pitchstone fines by thermogravimetric analysis. J Therm Anal Calorim. 2009;97:71–6.Tommaseo CE, Kersten M. Aqueous solubility diagrams for cementitious waste stabilization systems. 3. Mechanism of zinc immobilization by calcium silicate hydrate. Environ Sci Technol. 2002;36:2919–25.Peyronnard O, et al. Study of mineralogy and leaching behavior of stabilized/solidified sludge using differential acid neutralization analysis. Cem Conc Res. 2009. doi: 10.1016/j.cemconres.2009.03.016 .Moulin I, et al. Lead, zinc and chromium (III) and (VI) speciation in hydrated cement phases. International conference on the science and engineering of recycling for environmental protection, waste materials in construction (WASCON 2000), Harrogate, England, 2000, pp. 269–280.Ziegler F, Gieré R, Johnson CA. Sorption mechanisms of zinc to calcium silicate hydrate: sorption and microscopic investigations. Environ Sci Technol. 2001;35:4556–61.Qiao XC, Poon CS, Cheeseman CR. Investigation into the stabilization/solidification performance of Portland cement through cement clinker phases. J Hazard Mater. 2007;B139:238–43.Chen QY, et al. Immobilisation of heavy metal in cement-based solidification/stabilisation: a review. Waste Manag (Oxford). 2009;29:390–403.Chen QY, et al. Characterisation of products of tricalcium silicate hydration in the presence of heavy metals. J Hazard Mater. 2007;147:817–25.Fernandez-Olmo I, Chacon E, Irabien A. Influence of lead, zinc, iron (III) and chromium (III) oxides on the setting time and strength development of Portland cement. Cem Concr Res. 2001;31:1213–9.Fernandez-Olmo I, Chacon E, Irabien A. Leaching behavior of lead, chromium (III) and zinc in cement/metal oxides systems. ASCE J Environ Eng. 2003;129:532–8.Cappuyns V, Swennenb R. The application of pHstat leaching tests to assess the pH-dependent release of trace metals from soils, sediments and waste materials. J Hazard Mater. 2008;158:185–95.Payá J, Monzó J, Borrachero MV, Velázquez S. Evaluation of the pozzolanic activity of fluid catalytic cracking catalyst residue (FC3R): thermogravimetric analysis studies on FC3R-Portland cement pastes. Cem Concr Res. 2003;33:603–9.Wang S, Yang Z, Zeng L. Study of calcium zincate synthesized by solid-phase synthesis method without strong alkali. Mater Chem Phys. 2008;112:603–6.Stumm A, et al. Incorporation of zinc into calcium silicate hydrates, Part I: formation of C–S–H(I) with C/S = 2/3 and its isochemical counterpart gyrolite. Cem Concr Res. 2005;35:1665–75.Stephan D, Mallmann R, Knöfel D, Härdtl R. High intakes of Cr, Ni, and Zn in clinker, Part II. Influence on the hydration properties. Cem Concr Res. 1999;29:1959–67.Liu Y, et al. Thermal decomposition of basic zinc carbonate in nitrogen atmosphere. Thermochim Acta. 2004;414:121–3.Wahab R, et al. Synthesis and characterization of hydrozincite and its conversion into zinc oxide nanoparticles. J Alloy Compd. 2008;461:66–71.Hatakeyama T, Liu Z. Handbook of thermal analysis. New Yok: Wiley; 2000

Expression in Antennae and Reproductive Organs Suggests a Dual Role of an Odorant-Binding Protein in Two Sibling Helicoverpa Species

Odorant-binding proteins (OBPs) mediate both perception and release of semiochemicals in insects. These proteins are the ideal targets for understanding the olfactory code of insects as well as for interfering with their communication system in order to control pest species. The two sibling Lepidopteran species Helicoverpa armigera and H. assulta are two major agricultural pests. As part of our aim to characterize the OBP repertoire of these two species, here we focus our attention on a member of this family, OBP10, particularly interesting for its expression pattern. The protein is specifically expressed in the antennae of both sexes, being absent from other sensory organs. However, it is highly abundant in seminal fluid, is transferred to females during mating and is eventually found on the surface of fertilised eggs. Among the several different volatile compounds present in reproductive organs, OBP10 binds 1-dodecene, a compound reported as an insect repellent. These results have been verified in both H. armigera and H. assulta with no apparent differences between the two species. The recombinant OBP10 binds, besides 1-dodecene, some linear alcohols and several aromatic compounds. The structural similarity of OBP10 with OBP1 of the mosquito Culex quinquefasciatus, a protein reported to bind an oviposition pheromone, and its affinity with 1-dodecene suggest that OBP10 could be a carrier for oviposition deterrents, favouring spreading of the eggs in these species where cannibalism is active among larvae

Non-solvolytic synthesis of aqueous soluble TiO2 nanoparticles and real-time dynamic measurements of the nanoparticle formation.

Highly aqueously dispersible (soluble) TiO2 nanoparticles are usually synthesized by a solution-based sol-gel (solvolysis/condensation) process, and no direct precipitation of titania has been reported. This paper proposes a new approach to synthesize stable TiO2 nanoparticles by a non-solvolytic method - direct liquid phase precipitation at room temperature. Ligand-capped TiO2 nanoparticles are more readily solubilized compared to uncapped TiO2 nanoparticles, and these capped materials show distinct optical absorbance/emission behaviors. The influence of ligands, way of reactant feeding, and post-treatment on the shape, size, crystalline structure, and surface chemistry of the TiO2 nanoparticles has been thoroughly investigated by the combined use of X-ray diffraction, transmission electron microscopy, UV-visible (UV-vis) spectroscopy, and photoluminescence (PL). It is found that all above variables have significant effects on the size, shape, and dispersivity of the final TiO2 nanoparticles. For the first time, real-time UV-vis spectroscopy and PL are used to dynamically detect the formation and growth of TiO2 nanoparticles in solution. These real-time measurements show that the precipitation process begins to nucleate after an initial inhibition period of about 1 h, thereafter a particle growth occurs and reaches the maximum point after 2 h. The synthesis reaction is essentially completed after 4 h.RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are

Effect of Substrate Morphology on Growth and Field Emission Properties of Carbon Nanotube Films

Carbon nanotube (CNT) films were grown by microwave plasma-enhanced chemical vapor deposition process on four types of Si substrates: (i) mirror polished, (ii) catalyst patterned, (iii) mechanically polished having pits of varying size and shape, and (iv) electrochemically etched. Iron thin film was used as catalytic material and acetylene and ammonia as the precursors. Morphological and structural characteristics of the films were investigated by scanning and transmission electron microscopes, respectively. CNT films of different morphology such as vertically aligned, randomly oriented flowers, or honey-comb like, depending on the morphology of the Si substrates, were obtained. CNTs had sharp tip and bamboo-like internal structure irrespective of growth morphology of the films. Comparative field emission measurements showed that patterned CNT films and that with randomly oriented morphology had superior emission characteristics with threshold field as low as ~2.0 V/μm. The defective (bamboo-structure) structures of CNTs have been suggested for the enhanced emission performance of randomly oriented nanotube samples

A highly luminescent europium complex showing visible-light-sensitized red emission: Direct observation of the singlet pathway

Red glow in daylight ... chemist's delight! An efficient transfer of excitation energy from the ligand to the luminescent states of the coordinated Eu III ion in 1 occurs from the singlet excited state of the ligand. The complex shows characteristic bright red Eu-centered emission with a quantum yield of 0.52 when sensitized with visible light.link_to_subscribed_fulltex