Inflation in Supersymmetric SU(5)

We analyze the adjoint field inflation in supersymmetric (SUSY) SU(5) model. In minimal SUSY SU(5) hybrid inflation monopoles are produced at the end of inflation. We therefore explore the non-minimal model of inflation based on SUSY SU(5), like shifted hybrid, which provides a natural solution for the monopole problem. We find that the supergravity corrections with non-minimal Kahler potential are crucial to realize the central value of the scalar spectral index n_s ~ 0.96 consistent with the seven year WMAP data. The tensor to scalar ratio r is quite small, taking on values r < 10^{-5}. Due to R-symmetry massless SU(3) octet and SU(2) triplet Higgs bosons are present and could spoil for gauge coupling unification. To keep gauge coupling unification intact, light vector-like particles are added which are expected to be observed at LHC.Comment: 16 page

Q-LEACH: A New Routing Protocol for WSNs

Wireless Sensor Networks (WSNs) with their dynamic applications gained a tremendous attention of researchers. Constant monitoring of critical situations attracted researchers to utilize WSNs at vast platforms. The main focus in WSNs is to enhance network life-time as much as one could, for efficient and optimal utilization of resources. Different approaches based upon clustering are proposed for optimum functionality. Network life-time is always related with energy of sensor nodes deployed at remote areas for constant and fault tolerant monitoring. In this work, we propose Quadrature-LEACH (Q-LEACH) for homogenous networks which enhances stability period, network life-time and throughput quiet significantly

Challenges, applications and future of wireless sensors in Internet of Things: a review

The addition of massive machine type communication (mMTC) as a category of Fifth Generation (5G) of mobile communication, have increased the popularity of Internet of Things (IoT). The sensors are one of the critical component of any IoT device. Although the sensors posses a well-known historical existence, but their integration in wireless technologies and increased demand in IoT applications have increased their importance and the challenges in terms of design, integration, etc. This survey presents a holistic (historical as well as architectural) overview of wireless sensor (WS) nodes, providing a classical definition, in-depth analysis of different modules involved in the design of a WS node, and the ways in which they can be used to measure a system performance. Using the definition and analysis of a WS node, a more comprehensive classification of WS nodes is provided. Moreover, the need to form a wireless sensor network (WSN), their deployment, and communication protocols is explained. The applications of WS nodes in various use cases have been discussed. Additionally, an overlook of challenges and constraints that these WS nodes face in various environments and during the manufacturing process, are discussed. Their main existing developments which are expected to augment the WS nodes, to meet the requirements of the emerging systems, are also presented

Frequency of Predisposing Factor of Nausea and Vomiting After Chest Surgery Under General Anaesthesia

Background:&nbsp;Postoperative nausea and vomiting are common and distressing postsurgical symptoms. These symptoms are of particular concern in outpatient surgery because they may require additional direct resources, such as supplies and antiemetic drugs, and may delay discharge. The objective of this study was to measure the frequency of factors which can cause nausea and vomiting under general anaesthesia after chest surgery. Methodology:&nbsp;This descriptive case series evaluated frequency of predisposing factor of nausea and vomiting in patients of anaesthesia department of Gulab Devi Hospital Lahore. Questionnaire is made and patients were asked about their age, fever, previous surgery, NPO status, smoking history and hospital stay. This study included 140 patients with post-operative nausea and vomiting. Results:&nbsp;In this study, 140 patients were taken in which&nbsp; 65 (46.43%) were female and 75 (53.57%) were male. In 140 patient 134 (95.7%) were NPO and 6 (4.3%) were not &nbsp;NPO, 25 (17.9%) were obese and 115 (82.1%) were not obese, 88 (62.9%) patients were suffering fever and 52 (37.1%) were not suffering fever, 80 (57.1%) were infected and 59 (42.1%) were not infected, 53 (37.9%) patients had previous surgery and 87 (62.1%) had no previous surgery, 94 (67.1%) patients had received nitrous oxide and 46 (32.9%) didn\u27t, 97 (69.3%) received volatile gases and 43 (30.7%) not received, 29 (20.7%) received ketamine and 111 (79.3%) not received, 87 (62.1%) received suxamethonium and 53 (37.9%) not received, 119 (85.0%) received propofol and 21 (15.0%) not received, 110 (78.6%) received naluphine and 28 (20.0%) not received. Out of 140 patients, there were 122 (87.1%) who were suffering from pain and 18 (12.9%) were not. 91 (65.0%) patients had gastric distention and 49 (35.0%) patients didn\u27t. Opioids were given to 34 (24.3%) patients and not given to 106 (75.7%) patient. Conclusion:&nbsp;It is concluded that the nausea and vomiting after surgey under genral anesthesia is due to patient related factors in which most frequent is NPO. Drug related factors include propofol and nalbupin administration. Post operative factors include pain. In whole study of 140 patients, the&nbsp; most frequent is patient related factor (NPO) other than drug related factors and post-operative factors

Electrophoretic deposition of carbon nanotubes: recent progress and remaining challenges

Electrophoretic deposition (EPD) is a powerful technique to assemble carbon nanotube (CNT) coatings and composite films with controlled architectures. This comprehensive review of the EPD of CNTs and CNT-containing composites focuses on achievements within the last 15 years and ongoing challenges. Stable CNT suspensions are a pre-requisite for successful EPD and have been prepared by a variety of strategies, discussed here. The resulting film microstructure is determined by the initial feedstock, the suspension, and the EPD approach applied, as well as a variety of EPD processing parameters. Nanocomposites can be prepared via co-deposition, sequential deposition, or post-deposition treatments, to introduce metallic, ceramic or polymeric phases. There are numerous potential applications for both homogeneous and patterned CNT films, including as structural reinforcements for composites, as field emission, energy storage and conversion devices, as well as in biomedical applications. The advantages and disadvantages of EPD processing in these contexts are discussed

Primary Pelvic Hydatid Cyst: A Case Report

This is a case report of a young man who presented to us as a case of hypogastric pain and frequency of micturation. General physical examination and radiological evaluation confirmed a multiloculated pelvic swelling. Patient was subjected to laparotomy which confirmed the diagnosis of a primary pelvic hydatid disease. Patient was put on chemotherapy after surgery and is doing well on follow up

Photoluminescence revealed higher order plasmonic resonance modes and their unexpected frequency blue shifts in silver-coated silica nanoparticle antennas

© 2019 by the authors. Higher order plasmonic resonance modes and their frequency blue shifts in silver-coated silica nanoparticle antennas are studied. Synthesizing them with a wet chemistry method, silica (SiO2) nanoparticles were enclosed within silver shells with different thicknesses. A size-dependent Drude model was used to model the plasmonic shells and their optical losses. Two higher order plasmonic resonances were identified for each case in these simulations. The photoluminescence spectroscopy (PL) experimental results, in good agreement with their simulated values, confirmed the presence of those two higher order resonant modes and their resonance frequencies. When compared with pure metallic Ag nanoparticles, size-induced blue shifts were observed in these resonance frequencies

Scale-up and sustainability evaluation of biopolymer production from citrus waste offering carbon capture and utilisation pathway

Invited for this month's cover picture is the group of Dr Miao Guo from Department of Chemical Engineering at the Imperial College London (UK). The cover picture shows modelling research on the co-polymerisation of waste-sourced limonene oxide with CO2 to produce poly(limonene carbonate), which offers a sustainable pathway to achieve carbon capture and utilisation. A computational approach to process design was integrated with sustainability evaluation to model this synthetic pathway and identify the environmental-damaging and performance-limiting steps for further improvement. Our research highlights the potential of closed-loop manufacturing systems with waste recovery, which is instrumental in building a sustainable circular economy

Definition and Verification of Security Configurations of Cyber-Physical Systems

The proliferation of Cyber-Physical Systems (CPSs) is rais ing serious security challenges. These are complex systems, integrating physical elements into automated networked systems, often containing a variety of devices, such as sensors and actuators, and requiring complex management and data storage. This makes the construction of secure CPSs a challenge, requiring not only an adequate specification of secu rity requirements and needs related to the business domain but also an adaptation and concretion of these requirements to define a security configuration of the CPS where all its components are related. Derived from the complexity of the CPS, their configurations can be incorrect according to the requirements, and must be verified. In this paper, we propose a grammar for specifying business domain security requirements based on the CPS components. This will allow the definition of security requirements that, through a defined security feature model, will result in a configuration of services and security properties of the CPS, whose correctness can be verified. For this last stage, we have created a cata logue of feature models supported by a tool that allows the automatic verification of security configurations. To illustrate the results, the pro posal has been applied to automated verification of requirements in a hydroponic system scenario.Ministerio de Ciencia y Tecnología RTI2018-094283-B-C33 (ECLIPSE)Junta de Andalucía METAMORFOSIS (US-1381375)Junta de Castilla.La Mancha SBPLY-17-180501-000202 (GENESIS