Pharmacokinetic Modeling of Hydrocortisone by Including Protein Binding to Corticosteroid-Binding Globulin

BACKGROUND: Patients with adrenal insufficiency are treated with oral hydrocortisone (HC) to compensate for the loss of endogenous cortisol production. Intrinsic imperfections of cortisol replacement strategies in mimicking normal cortisol secretion are the underlying cause of the increased morbidity and mortality of patients suffering from secondary adrenal insufficiency (SAI). To improve oral hydrocortisone substitution therapy, a better understanding of its pharmacokinetics (PK) is necessary. The previous PK model did not include protein binding. It is known that protein binding can impact hydrocortisone pharmacokinetics. The aim of this study is to describe HC pharmacokinetics including the protein-binding state using Edsim++ (Mediware, Prague) pharmacokinetic modeling software, paving the way for an in-silico tool suitable for drug delivery design. METHODS: A total of 46 patients with SAI participated in a randomized double-blind crossover study Patients randomly received a low dose of HC (0.2-0.3 mg/kg body weight/day) for 10 weeks, followed by a high dose (0.4-0.6 mg/kg body weight/day) for another 10 weeks, or vice versa. Plasma samples were obtained and analyzed for free and total hydrocortisone. Single compartment population pharmacokinetic analysis was performed using an extended Werumeus-Buning model built in Edsim++. This model includes a mathematical approach for estimating free cortisol by Nguyen et al., taking the protein binding of HC to albumin and hydrocortisone-binding globulin (CBG, transcortin) into consideration, as well as different states of CBG which affect binding kinetics to HC. The goodness of fit for observed versus predicted values was calculated. RESULTS AND CONCLUSIONS: Nguyen's formula for free cortisol estimation was successfully implemented in a pharmacokinetic model. The model shows high Spearman's correlation for observed versus predicted hydrocortisone concentrations. Significantly higher correlations (Spearman's r, 0.901 vs. 0.836) between total and free hydrocortisone AUC24 (area-under the curve over 24 h) are found when comparing new and old models. This new model was used to simulate the plasma concentration-time behavior of a more suitable hydrocortisone formulation

Tutorial on model selection and validation of model input into precision dosing software for model-informed precision dosing

There has been rising interest in using model-informed precision dosing to provide personalized medicine to patients at the bedside. This methodology utilizes population pharmacokinetic models, measured drug concentrations from individual patients, pharmacodynamic biomarkers, and Bayesian estimation to estimate pharmacokinetic parameters and predict concentration-time profiles in individual patients. Using these individualized parameter estimates and simulated drug exposure, dosing recommendations can be generated to maximize target attainment to improve beneficial effect and minimize toxicity. However, the accuracy of the output from this evaluation is highly dependent on the population pharmacokinetic model selected. This tutorial provides a comprehensive approach to evaluating, selecting, and validating a model for input and implementation into a model-informed precision dosing program. A step-by-step outline to validate successful implementation into a precision dosing tool is described using the clinical software platforms Edsim++ and MwPharm++ as examples.</p

Population Pharmacokinetic Modeling of Total and Free Ceftriaxone in Critically Ill Children and Young Adults and Monte Carlo Simulations Support Twice Daily Dosing for Target Attainment

Critical illness, including sepsis, causes significant pathophysiologic changes that alter the pharmacokinetics (PK) of antibiotics. Ceftriaxone is one of the most prescribed antibiotics in patients admitted to the pediatric intensive care unit (PICU). We sought to develop population PK models of both total ceftriaxone and free ceftriaxone in children admitted to a single-center PICU using a scavenged opportunistic sampling approach. We tested if the presence of sepsis and phase of illness (before or after 48 h of antibiotic treatment) altered ceftriaxone PK parameters. We performed Monte Carlo simulations to evaluate whether dosing regimens commonly used in PICUs in the United States (50 mg/kg of body weight every 12 h versus 24 h) resulted in adequate antimicrobial coverage. We found that a two-compartment model best described both total and free ceftriaxone concentrations. For free concentrations, the population clearance value is 6.54 L/h/70 kg, central volume is 25.4 L/70 kg, and peripheral volume is 19.6 L/70 kg. For both models, we found that allometric weight scaling, postmenstrual age, creatinine clearance, and daily highest temperature had significant effects on clearance. The presence of sepsis or phase of illness did not have a significant effect on clearance or volume of distribution. Monte Carlo simulations demonstrated that to achieve free concentrations above 1 mu g/ml for 100% of the dosing intervals, a dosing regimen of 50 mg/kg every 12 h is recommended for most patients. A continuous infusion could be considered if the target is to maintain free concentrations four times above the MICs (4 mu g/ml)

Concentration-Effect Relationship of Ceftazidime Explains Why the Time above the MIC Is 40 Percent for a Static Effect In Vivo▿

Growth-kill dynamics were characterized in vitro, and the parameter estimates were used to simulate bacterial growth and kill in vivo using both mouse and human pharmacokinetics. The parameter estimates obtained in vitro predicted a time above the MIC of between 35 and 38% for a static effect in mice after 24 h of treatment

Use of Monte Carlo Simulations To Select Therapeutic Doses and Provisional Breakpoints of BAL9141

BAL9141, a new antimicrobial agent belonging to the class of parenteral pyrrolidinone-3-ylidenemethyl cephalosporins, is active against most gram-positive microorganisms, including methicillin-resistant variants (methicillin-resistant Staphylococcus aureus [MRSA] and methicillin-resistant Staphylococcus epidermidis [MRSE]), as well as against penicillin-resistant pneumococci (PRP) and many gram-negative microorganisms. BAL9141 is administered as the prodrug BAL5788, which is rapidly converted to BAL9141 by plasma esterases. Pharmacokinetic (PK) data obtained in a previous multiple ascending dose study were used to fit a population PK model to using the NPEM2 program, yielding PK parameter estimates and its covariance matrix for BAL9141. These estimates and matrix were used to perform Monte Carlo simulations (MCSs) and obtain unbiased target attainment rates (TARs) for various time periods during which the concentration remains above the MIC (T(>MIC)). Assuming a T(>MIC) of 40%, TARs of 100% were reached with a dose of 500 mg/liter every 12 h for pathogens with MICs of 2 mg/liter and with a dose of 750 mg/liter every 12 h for pathogens with MICs of 4 mg/liter. Because MICs are ≤2 mg/liter for most strains of MRSA, MRSE, and PRP (with some strains showing an MIC of 4 mg/liter), a dosing regimen of 750 mg every 12 h is proposed for clinical studies. The corresponding provisional breakpoint is S (susceptible) ≤ 4 mg/liter

Implementation and validation of a Bayesian method for accurately forecasting duration of optimal pharmacodynamic target attainment with dalbavancin during long-term use for treating subacute and/or chronic staphylococcal infections

Dalbavancin is being increasingly used for long-term treatment of subacute and/or chronic staphylococcal infections. Here we implemented and validated a new Bayesian model by means of the MwPharm software for accurately forecasting duration of pharmacodynamic target attainment above the efficacy thresholds of 4.02 or 8.04 mg/L against staphylococci. Forecasting accuracy improved substantially with the a posteriori approach compared to the a priori approach, especially when two measured concentrations were used. This strategy may help clinicians in estimating proper duration of optimal exposure with dalbavancin during longterm treatment

Target attainment and population pharmacokinetics of flucloxacillin in critically ill patients: a multicenter study

Purpose: Insufficient antimicrobial exposure has been associated with worse clinical outcomes. Reportedly, flucloxacillin target attainment in critically ill patients was heterogeneous considering the study population selection and reported target attainment percentages. Therefore, we assessed flucloxacillin population pharmacokinetics (PK) and target attainment in critically ill patients. Methods: This prospective, multicenter, observational study was conducted from May 2017 to October 2019 and included adult, critically ill patients administered flucloxacillin intravenously. Patients with renal replacement therapy or liver cirrhosis were excluded. We developed and qualified an integrated PK model for total and unbound serum flucloxacillin concentrations. Monte Carlo dosing simulations were performed to assess target attainment. The unbound target serum concentration was four times the minimum inhibitory concentration (MIC) for ≥ 50% of the dosing interval (ƒT>4xMIC ≥ 50%). Results: We analyzed 163 blood samples from 31 patients. A one-compartment model with linear plasma protein binding was selected as most appropriate. Dosing simulations revealed 26% ƒT>2 mg/L ≥ 50% following continuous infusion of 12 g flucloxacillin and 51% ƒT>2 mg/L ≥ 50% for 24 g. Conclusion: Based on our dosing simulations, standard flucloxacillin daily doses of up to 12 g may substantially enhance the risk of underdosing in critically ill patients. Prospective validation of these model predictions is needed

Cefepime pharmacokinetics in critically ill children and young adults undergoing continuous kidney replacement therapy

OBJECTIVES: Cefepime is an antibiotic commonly used to treat sepsis and is cleared by renal excretion. Cefepime dosing requires adjustment in patients with decreased kidney function and in those receiving continuous kidney replacement therapy (CKRT). We aimed to characterize cefepime PK in a diverse cohort of critically ill paediatric patients on CKRT. METHODS: Patients were identified from an ongoing pharmacokinetic/pharmacodynamic (PK/PD) study of beta-lactam antibiotics, and were included if they had received at least two cefepime doses in the ICU and were on CKRT for at least 24 h. PK parameters were estimated using MwPharm++ with Bayesian estimation and a paediatric population PK model. Target attainment was assessed as time of free cefepime concentrations above minimum inhibitory concentration (fT &gt; 1× or 4 × MIC). RESULTS: Seven patients were included in the study (ages 2 to 20 years). CKRT indications included liver failure (n = 1), renal failure (n = 4) and fluid overload (n = 2). Total effluent flow rates ranged from 1833 to 3115 (mean 2603) mL/1.73 m2/h, while clearance was 2.11-3.70 (mean 3.0) L/h/70 kg. Effluent flows were lower, but clearance and fT &gt; MIC were similar to paediatric data published previously. Using Pseudomonas aeruginosa MIC breakpoints, all patients had 100% of dosing interval above MIC, but only one had 100% of dosing interval above 4× MIC. CONCLUSIONS: Since most patients failed to attain stringent targets of 100% fT &gt; 4×  MIC, model-informed precision dosing may benefit such patients.</p

Monte Carlo simulations based on phase 1 studies predict target attainment of ceftobiprole in nosocomial pneumonia patients: a validation study

Item does not contain fulltextMonte Carlo simulation (MCS) of antimicrobial dosage regimens during drug development to derive predicted target attainment values is frequently used to choose the optimal dose for the treatment of patients in phase 2 and 3 studies. A criticism is that pharmacokinetic (PK) parameter estimates and variability in healthy volunteers are smaller than those in patients. In this study, the initial estimates of exposure from MCS were compared with actual exposure data in patients treated with ceftobiprole in a phase 3 nosocomial-pneumonia (NP) study (NTC00210964). Results of MCS using population PK data from ceftobiprole derived from 12 healthy volunteers were used (J. W. Mouton, A. Schmitt-Hoffmann, S. Shapiro, N. Nashed, N. C. Punt, Antimicrob. Agents Chemother. 48:1713-1718, 2004). Actual individual exposures in patients were derived after building a population pharmacokinetic model and were used to calculate the individual exposure to ceftobiprole (the percentage of time the unbound concentration exceeds the MIC [percent fT > MIC]) for a range of MIC values. For the ranges of percent fT > MIC used to determine the dosage schedule in the phase 3 NP study, the MCS using data from a single phase 1 study in healthy volunteers accurately predicted the actual clinical exposure to ceftobiprole. The difference at 50% fT > MIC at an MIC of 4 mg/liter was 3.5% for PK-sampled patients. For higher values of percent fT > MIC and MICs, the MCS slightly underestimated the target attainment, probably due to extreme values in the PK profile distribution used in the simulations. The probability of target attainment based on MCS in healthy volunteers adequately predicted the actual exposures in a patient population, including severely ill patients