Functional Nanopores: A Solid-state Concept for Artificial Reaction Compartments and Molecular Factories

On the road towards the long-term goal of the NCCR Molecular Systems Engineering to create artificial molecular factories, we aim at introducing a compartmentalization strategy based on solid-state silicon technology targeting zeptoliter reaction volumes and simultaneous electrical contact to ensembles of well-oriented molecules. This approach allows the probing of molecular building blocks under a controlled environment prior to their use in a complex molecular factory. Furthermore, these ultra-sensitive electrical conductance measurements allow molecular responses to a variety of external triggers to be used as sensing and feedback mechanisms. So far, we demonstrate the proof-of-concept by electrically contacting self-assembled mono-layers of alkane-dithiols as an established test system. Here, the molecular films are laterally constrained by a circular dielectric confinement, forming a so-called `nanopore`. Device yields above 85% are consistently achieved down to sub-50 nm nanopore diameters. This generic platform will be extended to create distributed, cascaded reactors with individually addressable reaction sites, including interconnecting micro-fluidic channels for electrochemical communication among nanopores and sensing sites for reaction control and feedback. In this scientific outlook, we will sketch how such a solid-state nanopore concept can be used to study various aspects of molecular compounds tailored for operation in a molecular factory

Electrochemical Multiplexing: Control over Surface Functionalization by Combining a Redox-Sensitive Alkyne Protection Group with "Click"-Chemistry

Local functionalization of surfaces is a current technological challenge. An electrochemically addressable alkyne protection group is presented enabling the site-selective liberation of alkynes exclusively on electrified electrodes. This controlled deprotection is based on a mendione chromophore which becomes a strong enough nucleophile upon reduction to intramolecularly attack the trialkylsilane alkyne protection group. The site-selective liberation of the alkyne is demonstrated by immobilizing the protected alkyne precursor on a transparent TiO2 electrode and subsequently immobilizing red and blue azide dyes by azide-alkyne "click"-chemistry. While the proof-of-principle is based on colorations visible to the bare eye, the technique presented is generic also to nontransparent electrodes, microscale separations, and functional moieties other than dyes. It may open manifold applications where site-selective functionalization is required but hardly realizable with conventional methods

Multicone Diamond Waveguides for Nanoscale Quantum Sensing

The long-lived electronic spin of the nitrogen-vacancy (NV) center in diamond is a promising quantum sensor for detecting nanoscopic magnetic and electric fields in a variety of experimental conditions. Nevertheless, an outstanding challenge in improving measurement sensitivity is the poor signal-to-noise ratio (SNR) of prevalent optical spin-readout techniques. Here, we address this limitation by coupling individual NV centers to optimized diamond nanopillar structures, thereby improving optical collection efficiency of fluorescence. First, we optimize the structure in simulation, observing an increase in collection efficiency for tall ($\geq$ 5 $\mu$m) pillars with tapered sidewalls. We subsequently verify these predictions by fabricating and characterizing a representative set of structures using a reliable and reproducible nanofabrication process. An optimized device yields increased SNR, owing to improvements in collimation and directionality of emission. Promisingly, these devices are compatible with low-numerical-aperture, long-working-distance collection optics, as well as reduced tip radius, facilitating improved spatial resolution for scanning applications.Comment: 22 pages, five figure

Fast Scanning Nitrogen-Vacancy Magnetometry by Spectrum Demodulation

We demonstrate a spectrum demodulation technique allowing for rapid imaging in scanning nitrogen-vacancy center magnetometry. Our method relies on a periodic excitation of the electron spin resonance by wide-band frequency sweeps at a kilohertz rate combined with a phase-locked detection of the photoluminescence signal. The technique is robust against changes in spectrum shape and photoluminescence intensity, and is readily extended by a frequency feedback to enable real-time tracking of the spin resonance. Fast scanning magnetometry is especially useful for samples where the signal dynamic range is large, of order millitesla, such as for ferromagnets or ferrimagnets. We demonstrate our method by mapping stray fields above the model antiferromagnet α-Fe2O3 (hematite) at pixel rates of up to 100 Hz and an image resolution exceeding one megapixel.ISSN:2331-701

Direct electrification of silicon microfluidics for electric field applications

Microfluidic systems are widely used in fundamental research and industrial applications due to their unique behavior, enhanced control, and manipulation opportunities of liquids in constrained geometries. In micrometer-sized channels, electric fields are efficient mechanisms for manipulating liquids, leading to deflection, injection, poration or electrochemical modification of cells and droplets. While PDMS-based microfluidic devices are used due to their inexpensive fabrication, they are limited in terms of electrode integration. Using silicon as the channel material, microfabrication techniques can be used to create nearby electrodes. Despite the advantages that silicon provides, its opacity has prevented its usage in most important microfluidic applications that need optical access. To overcome this barrier, silicon-on-insulator technology in microfluidics is introduced to create optical viewports and channel-interfacing electrodes. More specifically, the microfluidic channel walls are directly electrified via selective, nanoscale etching to introduce insulation segments inside the silicon device layer, thereby achieving the most homogeneous electric field distributions and lowest operation voltages feasible across microfluidic channels. These ideal electrostatic conditions enable a drastic energy reduction, as effectively shown via picoinjection and fluorescence-activated droplet sorting applications at voltages below 6 and 15 V, respectively, facilitating low-voltage electric field applications in next-generation microfluidics.ISSN:2096-1030ISSN:2055-743

Direct electrification of silicon microfluidics for electric field applications

Abstract Microfluidic systems are widely used in fundamental research and industrial applications due to their unique behavior, enhanced control, and manipulation opportunities of liquids in constrained geometries. In micrometer-sized channels, electric fields are efficient mechanisms for manipulating liquids, leading to deflection, injection, poration or electrochemical modification of cells and droplets. While PDMS-based microfluidic devices are used due to their inexpensive fabrication, they are limited in terms of electrode integration. Using silicon as the channel material, microfabrication techniques can be used to create nearby electrodes. Despite the advantages that silicon provides, its opacity has prevented its usage in most important microfluidic applications that need optical access. To overcome this barrier, silicon-on-insulator technology in microfluidics is introduced to create optical viewports and channel-interfacing electrodes. More specifically, the microfluidic channel walls are directly electrified via selective, nanoscale etching to introduce insulation segments inside the silicon device layer, thereby achieving the most homogeneous electric field distributions and lowest operation voltages feasible across microfluidic channels. These ideal electrostatic conditions enable a drastic energy reduction, as effectively shown via picoinjection and fluorescence-activated droplet sorting applications at voltages below 6 and 15 V, respectively, facilitating low-voltage electric field applications in next-generation microfluidics