14,634 research outputs found
The linear stability of double-diffusive miscible rectilinear displacements in a Hele-Shaw cell
We investigate the viscous instability of a miscible displacement process in a recti-linear geometry, when the viscosity contrast is controlled by two quantities whichdiuse at dierent rates. The analysis is applicable to displacement in a porousmedium with two dissolved species, or to displacement in a Hele-Shaw cell with twodissolved species or with one dissolved species and a thermal contrast. We carry outasymptotic analyses of the linear stability behaviour in two regimes: that of smallwavenumbers at intermediate times, and that of large times.An interesting feature of the large-time results is the existence of regimes in whichthe favoured wavenumber scales with t−1/4, as opposed to the t−3/8 scaling foundin other regimes including that of single-species ngering. We also show that theregion of parameter space in which the displacement is unstable grows with time,and that although overdamped growing perturbations are possible, these are neverthe fastest-growing perturbations so are unlikely to be observed. We also interpretour results physically in terms of the stabilising and destabilising mechanisms actingon an incipient nger
Estuarine turbidity, flushing, salinity, and circulation
The effects of estuarine turbidity, flushing, salinity, and circulation on the ecology of the Chesapeake Bay are discussed. The sources of fresh water, the variations in salinity, and the circulation patterns created by temperature and salinity changes are analyzed. The application of remote sensors for long term observation of water temperatures is described. The sources of sediment and the biological effects resulting from increased sediments and siltation are identified
Recommended from our members
Development of generic testing strategies for mixed-signal integrated circuits
Describes work at the Polytechnic of Huddersfield SERC/DTI research project IED 2/1/2121 conducted in collaboration with GEC-Plessey Semiconductors, Wolfson Microelectronics, and UMIST. The aim of the work is to develop generic testing strategies for mixed-signal (mixed analogue and digital) integrated circuits. The paper proposes a test structure for mixed-signal ICs, and details the development of a test technique and fault model for the analogue circuit cells encountered in these devices. Results obtained during the evaluation of this technique in simulation are presented, and the ECAD facilities that have contributed to this and other such projects are described
Recommended from our members
Testing of mixed-signal systems using dynamic stimuli
The impulse response of a linear circuit element contains enough information to functionally characterise that element. A technique for comparison of observed and expected (reference) transient responses, which results in an absolute measure of device functionality, is presented. Comparisons of transient response test results with the results from existing test programs are also presented
Precis of epistemic angst:Book Symposium: Duncan Pritchard, Epistemic Angst (Princeton University Press, 2015, xiii + 236 pages)
ABSTRACT This book symposium features three critical pieces dealing with Duncan Pritchard's book, 'Epistemic Angst'; the symposium also contains Pritchard's replies to his critics
The Stokes boundary layer for a thixotropic or antithixotropic fluid
We present a mathematical investigation of the oscillatory boundary layer (‘Stokes layer’) in a semi-infinite fluid bounded by an oscillating wall (the socalled ‘Stokes problem’), when the fluid has a thixotropic or antithixotropic rheology. We obtain asymptotic solutions in the limit of small-amplitude oscillations, and we use numerical integration to validate the asymptotic solutions and to explore the behaviour of the system for larger-amplitude oscillations. The solutions that we obtain differ significantly from the classical solution for a Newtonian fluid. In particular, for antithixotropic fluids the velocity reaches zero at a finite distance from the wall, in contrast to the exponential decay for a thixotropic or a Newtonian fluid. For small amplitudes of oscillation, three regimes of behaviour are possible: the structure parameter may take values defined instantaneously by the shear rate, or by a long-term average; or it may behave hysteretically. The regime boundaries depend on the precise specification of structure build-up and breakdown rates in the rheological model, illustrating the subtleties of complex fluid models in non-rheometric settings. For larger amplitudes of oscillation the dominant behaviour is hysteretic. We discuss in particular the relationship between the shear stress and the shear rate at the oscillating wall
Quantum Theory of a Resonant Photonic Crystal
We present a quantum model of two-level atoms localized in a 3D lattice,
based on the Hopfield theory of exciton polaritons. In addition to a
polaritonic gap at the exciton energy, a photonic bandgap opens up at the
Brillouin zone boundary. Upon tuning the lattice period or angle of incidence
to match the photonic gap with the exciton energy, one obtains a combined
polaritonic and photonic gap as a generalization of Rabi splitting. For typical
experimental parameters, the size of the combined gap is on the order of 25
cm^{-1}, up to 10^5 times the detuned gap size. The dispersion curve contains a
branch supporting slow-light modes with vanishing exciton probability density.Comment: 4 pages, 3 figure
Wearable Energy Harvesting for Charging Portable Electronic Devices by Walking
Wearable energy harvesting technologies will become an everyday part of future portable electronic devices. By generating the energy where the energy is needed and not relying on a main power source to recharge the portable devices battery, wearable energy harvesters will enable future generations to have even more freedoms, travel further, and never run low on battery again. This will reduce the energy consumption of the mains grid and thus in turn reduce CO² emissions generated by this traditional power source making this research important for the whole plant. This research project aims to take another step towards in helping the development of future technologies by investigating novel wearable energy harvesting designs and showing ability to charge current portable electronic devices such as smart phones and tables. This required research into a broad range of topics including, energies from humans, energy conversion mechanisms, the movement of people and the power demands for charging current portable electronic devices. Background research in the human energy levels and how research to date had gone about exacting different energy sources in different ways was the starting point for this research. This leads on to a more detailed look into the exaction methods and optimization of footfall energy harvester designs. Looking into the human gait cycle gave the information required to replicate human footfall motion for use in scientific experiments. From this background research, two bespoke designs of wearable energy harvester have been created. The first novel design showed a promising way of extracting footfall energy and converting it into useable electrical energy producing Watt-Level of power. The second design is an evolution of the first design but expands the extraction method to both feet and relocated the main harvester unit into a backpack worn by the user. The improved design incorporates a novel approach to energy conversion method by introducing a mechanical energy storage system before transduction into electrical energy. This is shown to increased electrical power output from footfall energy, reduced energy consumption of the wearer and is shown to truly be able to charge current portable electronics. The improved design is shown to produce 2.6 Watts average power from normal walking. The experimental set ups, procedures, and their results are shown throughout this thesis. These experimental results are confirmed by using the wearable energy harvesters on a treadmill at the three main walking speeds showing their real-world capabilities. To demonstrate the wearable energy harvester deigns shown in this research project were truly able to charge current portable technologies, endurance testing was also performed. This confirms the harvesters were able to work for longer periods of time. This longer time frame is needed for the charging times of the current portable devices. After researching into wearable energy harvesting from over the last 20 years it was a struggle to compare all the different forms, designs, types and power outputs. It became clear that the existing methods were unable to provide a clear picture of harvester’s scalability, changeability and useability for future design ideas. This is why a new form of comparison was created and is shown to have strong benefits over the existing methods
Measurement of Holmium Rydberg series through MOT depletion spectroscopy
We report measurements of the absolute excitation frequencies of Ho
and odd-parity Rydberg series. The states are
detected through depletion of a magneto-optical trap via a two-photon
excitation scheme. Measurements of 162 Rydberg levels in the range
yield quantum defects well described by the Rydberg-Ritz formula. We observe a
strong perturbation in the series around due to an unidentified
interloper at 48515.47(4) cm. From the series convergence, we determine
the first ionization potential cm, which is
three orders of magnitude more accurate than previous work. This work
represents the first time such spectroscopy has been done in Holmium and is an
important step towards using Ho atoms for collective encoding of a quantum
register.Comment: 6 figure
Safety, the Preface Paradox and Possible Worlds Semantics
This paper contains an argument to the effect that possible worlds semantics renders
semantic knowledge impossible, no matter what ontological interpretation is given
to possible worlds. The essential contention made is that possible worlds semantic
knowledge is unsafe and this is shown by a parallel with the preface paradox
- …