294 research outputs found
An innovative, fast and facile soft-template approach for the fabrication of porous PDMS for oil-water separation
Oil wastewater and spilled oil caused serious environmental pollution and
damage to public health in the last years. Therefore, considerable efforts are
made to develop sorbent materials able to separate oil from water with high
selectivity and sorption capacity. However most of them are low reusable, with
low volume absorption capacity and poor mechanical properties. Moreover, the
synthesis is time-consuming, complex and expensive limiting its practical
application in case of emergency. Here we propose an innovative approach for
the fabrication of porous PDMS starting from an inverse water-in-silicone
procedure able to selectively collect oil from water in few seconds. The
synthesis is dramatically faster than previous approaches, permitting the
fabrication of the material in few minutes independently from the dimension of
the sponges. The porous material evidenced a higher volume sorption capacity
with respect to other materials already proposed for oil sorption from water
and excellent mechanical and reusability properties.This innovative fast and
simple approach can be successful in case of emergency, as oil spill accidents,
permitting in situ fabrication of porous absorbents
Does Size Matter? The Case of Piezoresistive Properties of Carbon Nanotubes/Elastomer Nanocomposite Synthesized through Mechanochemistry
The growing interest in piezoresistive sensors has favored the development of numerous approaches and materials for their fabrication. Within this framework, carbon nanotubes (CNTs) are often employed. However, CNTs are a heterogeneous material with different morphological characteristics in terms of length and diameter, and, so far, experimental studies have not usually considered the effect of these parameters on the final sensor performances. Here, we observe how, by simply changing the CNTs length in a solvent-free mechanochemistry fabrication method, different porous 3D elastomeric nanocomposites with different electrical and mechanical properties can be obtained. In particular, the use of longer carbon nanotubes allows the synthesis of porous nanocomposites with better mechanical stability and conductivity, and with a nine-times-lower limit of detection (namely 0.2 Pa) when used as a piezoresistive sensor. Moreover, the material prepared with longer carbon nanotubes evidenced a faster recovery of its shape and electrical properties during press/release cycles, thus allowing faster response at different pressures. These results provide evidence as to how CNTs length can be a key aspect in obtaining piezoresistive sensors with better properties
Polydopamine-Coated Magnetic Iron Oxide Nanoparticles: From Design to Applications
Magnetic iron oxide nanoparticles have been extensively investigated due to their applications in various fields such as biomedicine, sensing, and environmental remediation. However, they need to be coated with a suitable material in order to make them biocompatible and to add new functionalities on their surface. This review is intended to give a comprehensive overview of recent advantages and applications of iron oxide nanoparticles coated by polydopamine film. The synthesis method of magnetic nanoparticles, their functionalization with bioinspired materials and (in particular) with polydopamine are discussed. Finally, some interesting applications of polydopamine-coated magnetic iron oxide nanoparticles will be pointed out
A drug safety evaluation of abiraterone acetate in the treatment of prostate cancer
Introduction: To evaluate the safety profile characteristics of abiraterone acetate (AA) in the treatment of metastatic prostate cancer (mPCa). Areas covered: In this literature review the authors evaluate safety data from phase III trials investigating the combination of abiraterone acetate plus prednisone (AAP) in patients with metastatic prostate cancer. In particular, the aim was to clarify its toxicity profile, long-term exposure impact, and the correlation with general health-related quality of life (HRQoL). Expert opinion: Based on the studies reviewed, it appears that abiraterone acetate has favourable outcomes, is effective and well tolerated, mostly in asymptomatic or slightly symptomatic patients, and has recognised toxicity profile characteristics. Incidence of adverse events (AEs), such as mineralocorticoid- and corticosteroid-releated AEs, and hepatotoxicity is well known and widely described. Understanding the toxicity profile of AA could assist decision-making in clinical practice
Pectobacterium atrosepticum biosensor for monitoring blackleg and soft rot disease of potato
Pectobacterium atrosepticum (Pba) is a quarantine and threatening phytopathogen known as the causal agent of blackleg and soft rot disease of potatoes in many areas. Its early detection is then important to have healthy potato tubers and reduce economic losses. Today, conventional methods such as enzyme-linked immunosorbent-assay (ELISA) and polymerase chain reaction (PCR) are typically used for Pba detection, but they are expensive and time-consuming. Here we report on the optimization of an alternative approach based on an electrochemical impedance immunosensor combining a microfluidic module and a microelectrodes array, and having advantages in terms of low cost, ease of use and portability. For validation and for assessing its performance, the lab-on-chip platform has been compared with two standard methods (ELISA and PCR)
Centrifugation force and time alter CASA parameters and oxidative status of cryopreserved stallion sperm
Conventional sperm selection techniques used in ARTs rely on centrifugation steps. To date, the different studies reported on the effects of centrifugation on stallion sperm motility provided contrasting results and do not include effects on mitochondrial functionality and different oxidative parameters. The effects of different centrifugation protocols (300 ×g for 5’, 300 ×g for 10’, 1500 ×g for 5’ and 1500 ×g for 10’ vs no centrifugation) on motility and oxidative status in cryopreserved stallion sperm, were analyzed. After centrifugation, almost all motility parameters were significantly altered, as observed by computer-assisted sperm analysis. A polarographic assay of oxygen consumption showed a progressive decrease in mitochondria respiration from the gentlest to the strongest protocol. By laser scanning confocal microscopy, significant reduction of mitochondrial membrane potential, at any tested protocol, and time-dependent effects, at the same centrifugal force, were found. Increased DNA fragmentation index at any tested protocol and time-dependent effects at the same centrifugal force were found, whereas increased protein carbonylation was observed only at the strongest centrifugal force. These results provide more comprehensive understandings on centrifugation-induced effects on cryopreserved stallion sperm and suggest that, even at a weak force for a short time, centrifugation impairs different aspects of equine sperm metabolism and functionality
Conspicuity and muscle-invasiveness assessment for bladder cancer using VI-RADS: a multi-reader, contrast-free MRI study to determine optimal b-values for diffusion-weighted imaging
To (1) compare bladder cancer (BC) muscle invasiveness among three b-values using a contrast-free approach based on Vesical Imaging-Reporting and Data System (VI-RADS), to (2) determine if muscle-invasiveness assessment is affected by the reader experience, and to (3) compare BC conspicuity among three b-values, qualitatively and quantitatively
- …