Transdermal iontophoretic delivery of timolol maleate

Transdermal iontophoresis would be a promising method for the systemic delivery of water soluble and ionic drugs of relatively high molecular size, including peptides. The objective of the present study was to investigate the effect of biological variable such as guinea pig and human cadaver skin and other variables like drug concentration, current density on the transdermal iontophoretic transport of timolol maleate. The permeation profile of drug using solution and gel formulation was studied and compared. For better bioavailability, better patient compliance, and enhanced delivery, an iontophoretic drug delivery system of a timolol maleate matrix gel was formulated using Carbopol 974P. The study was conducted using silver-silver chloride electrodes across the guinea pig and human cadaver skin. Viscosity measurements and flux calculations indicated the suitability of the Carbopol 974P gel for transdermal iontophoretic delivery of timolol maleate. Anodal iontophoresis with silver-silver chloride electrode significantly increased the timolol maleate skin permeation as compared with the passive permeation study. The amount of timolol maleate transported during iontophoresis was significantly different among the different skins. However, iontophoretic gel formulations provided required flux of drug through human cadaver skin.A iontoforese transdérmica seria um método promissor para a liberação sistêmica de fármacos solúveis em água e iônicos de relativamente elevado tamanho molecular, incluindo peptídeos. O objetivo do presente estudo foi investigar o efeito da variável biológica, tais como cobaia e pele de cadáver humano, e outras variáveis como concentração do fármaco, densidade de corrente sobre o transporte transdérmico iontoforético de maleato de timolol. Comparou-se o perfil de permeação do fármaco usando a formulação de solução e de gel. Para melhor biodisponibilidade, melhor adesão do paciente e liberação aprimorada, formulou-se sistema de liberação iontoforética gel de maleato de timolol usando Carbopol 974P. O estudo foi conduzido usando eletrodos de prata-cloreto de prata na cobaia e na pele de cadáver humano. Medidas de viscosidade e de fluxo indicaram a adequação do gel Carbopol 974 P para liberação iontoforética transdérmica do maleato de timolol. A iontoforese anódica com eletrodo de prata-cloreto de prata aumentou significativamente a permeação dérmica do maleato de timolol, comparativamente à permeação passiva. A quantidade de maleato de timolol transportado durante a iontoforese foi significativamente diferente entre as diferentes peles . No entanto, as formulações iontoforéticas de gel forneceram o fluxo necessário do fármaco através da pele de cadáver humano

Molecular cloning and in silico analysis of heat stress responsive gene ClpB1 from Ziziphus nummularia genotypes

Heat stress is one of the most destructive abiotic stresses which adversely affect crop plants, resulting in reduced potential yield. Plants that are able to tolerate heat stress possess an intrinsic mechanism which needs to be unravelled at molecular level so as to decipher the role of gene and metabolic pathways involved in heat stress tolerance. To understand the molecular mechanism of heat stress tolerance, studies on isolation and characterization of gene for abiotic stress tolerance, ClpB1 were performed in Ziziphus nummularia (Burm. f.) Wight & Arn, an inherently abiotic stress tolerant plant. Differential expression studies of gene ClpB1 by qRT-PCR in contrasting genotypes of Z. nummularia (genotype Jaisalmer: heat tolerant and genotype Godhra: heat sensitive) was carried out. CDS (Coding DNA sequence) of gene ClpB1 from the genotypes Z. nummularia J and Z. nummularia G were cloned and characterized. These genes ZnJClpB1 (ACNO: MN398267) and ZnGClpB1 (ACNO: MN398268) showed 1.09 and 2.3% dissimilarity at nucleotide and amino acid level, respectively. Computational based analysis revealed the presence of larger functional AAA lid 9 domains in ZnJClpB1 as compared to ZnGClpB1. Phylogenetic relationship and structure modeling was performed to understand isoform type and basic molecular functioning and of gene ZnClpB1 from Z. nummularia genotypes. Possibly, it is the first report on cloning, characterization and comparative in silico based analysis of gene ZnClpB1 in Z. nummularia. Gene ZnClpB1 would be a prospective resource for developing abiotic stress tolerant crops by transgenic or breeding approach

Transdermal iontophoretic delivery of timolol maleate

Transdermal iontophoresis would be a promising method for the systemic delivery of water soluble and ionic drugs of relatively high molecular size, including peptides. The objective of the present study was to investigate the effect of biological variable such as guinea pig and human cadaver skin and other variables like drug concentration, current density on the transdermal iontophoretic transport of timolol maleate. The permeation profile of drug using solution and gel formulation was studied and compared. For better bioavailability, better patient compliance, and enhanced delivery, an iontophoretic drug delivery system of a timolol maleate matrix gel was formulated using Carbopol 974P. The study was conducted using silver-silver chloride electrodes across the guinea pig and human cadaver skin. Viscosity measurements and flux calculations indicated the suitability of the Carbopol 974P gel for transdermal iontophoretic delivery of timolol maleate. Anodal iontophoresis with silver-silver chloride electrode significantly increased the timolol maleate skin permeation as compared with the passive permeation study. The amount of timolol maleate transported during iontophoresis was significantly different among the different skins. However, iontophoretic gel formulations provided required flux of drug through human cadaver skin.<br>A iontoforese transdérmica seria um método promissor para a liberação sistêmica de fármacos solúveis em água e iônicos de relativamente elevado tamanho molecular, incluindo peptídeos. O objetivo do presente estudo foi investigar o efeito da variável biológica, tais como cobaia e pele de cadáver humano, e outras variáveis como concentração do fármaco, densidade de corrente sobre o transporte transdérmico iontoforético de maleato de timolol. Comparou-se o perfil de permeação do fármaco usando a formulação de solução e de gel. Para melhor biodisponibilidade, melhor adesão do paciente e liberação aprimorada, formulou-se sistema de liberação iontoforética gel de maleato de timolol usando Carbopol 974P. O estudo foi conduzido usando eletrodos de prata-cloreto de prata na cobaia e na pele de cadáver humano. Medidas de viscosidade e de fluxo indicaram a adequação do gel Carbopol 974 P para liberação iontoforética transdérmica do maleato de timolol. A iontoforese anódica com eletrodo de prata-cloreto de prata aumentou significativamente a permeação dérmica do maleato de timolol, comparativamente à permeação passiva. A quantidade de maleato de timolol transportado durante a iontoforese foi significativamente diferente entre as diferentes peles . No entanto, as formulações iontoforéticas de gel forneceram o fluxo necessário do fármaco através da pele de cadáver humano

Not Available

Not AvailablePreviously, we isolated CDS of Ziziphus nummularia isoform ZnJClpB1-C from heat stress-tolerant genotype Jaisalmer. To further functionally validate ZnJClpB1-C assumed function in tobacco and to generate novel germplasm for heat stress tolerance, this gene was transformed in the Nicotiana tabacum. ClpB proteins are the major key player required for basal and induced heat stress tolerance in plant cells under heat stress. In Ziziphus nummularia ClpB1-C transcript from genotype Jaisalmer was highly upregulated under heat stress conditions, as reported earlier. Nine transgenic lines (T1) from three transgenic tobacco events with single-copy integration (T0 stage) were taken for heat stress analysis at seedling stage. Mature tobacco transgenic plants did not show any deformity as compared to wild plants when grown under normal conditions. Overexpression of ZnJClpB1-C in tobacco significantly increased the tolerance to heat stress. Under heat stress conditions (42 °C), T1 transgenic tobacco seedlings showed higher photosynthetic rate, relative water content, membrane stability index and lower levels of MDA, compared to the wild type untransformed plants. The qRT-PCR analysis revealed different level of transgene expression (1.08 to 3.89 folds) in 9 T1 transgenic lines. In vitro roles of ZnJClpB1-C regulating thermotolerance is not reported so far. These results demonstrated the positive roles of ZnJClpB1-C in enhancing thermotolerance and its use as a genomic resource in the near future for developing heat stress-tolerant germplasm. AvailableNot Availabl

Pharmaceutical Cocrystal of Piroxicam: Design, Formulation and Evaluation

Purpose: Cocrystallisation of drug with coformers is a promising approach to alter the solid sate properties of drug substances like solubility and dissolution. The objective of the present work was to prepare, formulate and evaluate the piroxicam cocrystal by screening various coformers. Methods: Cocrystals of piroxicam were prepared by dry grinding method. The melting point and solubility of crystalline phase was determined. The potential cocrystal was characterized by DSC, IR, XRPD. Other pharmaceutical properties like solubility and dissolution rate were also evaluated. Orodispersible tablets of piroxicam cocrystal were formulated, optimized and evaluated using 32 factorial design. Results: Cocrystals of piroxicam-sodium acetate revealed the variation in melting points and solubility. The cocrystals were obtained in 1:1 ratio with sodium acetate. The analysis of Infrared explicitly indicated the shifting of characteristic bands of piroxicam. The X-Ray Powder Diffraction pattern denoted the crystallinity of cocrystals and noteworthy difference in 2θ value of intense peaks. Differential scanning calorimetry spectra of cocrystals indicated altered endotherms corresponding to melting point. The pH solubility profile of piroxicam showed sigmoidal curve, which authenticated the pKa-dependent solubility. Piroxicam cocrystals also exhibited a similar pH-solubility profile. The cocrystals exhibited faster dissolution rate owing to cocrystallization as evident from 30% increase in the extent of dissolution. The orodispersible tablets of piroxicam cocrystals were successfully prepared by direct compression method using crosscarmelose sodium as superdisintegrant with improved disintegration time (30 sec) and dissolution rate.Conclusion: The piroxicam cocrystal with modified properties was prepared with sodium acetate and formulated as orodispersible tablets having faster disintegration and greater dissolution rate

Design, preparation, and in vitro evaluation of gastroretentive floating matrix tablet of mitiglinide

The present research is focused on developing floating matrix tablets of mitiglinide to prolong its gastric residence time for better absorption. Gastroretentive tablets were prepared using a direct compression technique with hydroxypropyl methylcellulose K15M (HPMC K15M) and sodium alginate as matrix-forming polymers and sodium bicarbonate as the gas-forming agent. A 32 full factorial design was adopted to optimize the flotation and release profile of the drug. The concentration of HPMC K15M and sodium alginate were taken as the independent variables, and the floating lag time, time required for 50% drug release, and time required for 90% drug release were taken as dependent variables. The compatibility between drug and excipients was assessed by Fourier transform infrared (FTIR) spectroscopy. The prepared tablets were evaluated for different parameters such as hardness, friability, drug content, floating time, in vitro dissolution, and stability. Dissolution data were analyzed using various kinetic models to ascertain the mechanism of drug release. Finally, a radiographic study was conducted to estimate the retention time of the optimized floating matrix tablets of mitiglinide inside the body. The results revealed that all the physical properties of the developed formulations were within standard limits. The formulation M3, with the maximum amount of both independent variables, was considered to be the optimized formulation based on the desirability value. In addition, the optimized M3 formulation showed stability for over 6 months, as evidenced by insignificant changes in lag time, drug release pattern, and other physical properties. Furthermore, radiographic examination indicated that the tablets remained afloat in gastric fluid for up to 12 h in the rabbit’s stomach. In conclusion, the developed floating matrix tablet of mitiglinide could be regarded as a promising formulation that could release the drug in the stomach at a controlled rate and, hence, offer better management of type II diabetes

Surface Functionalization of Nanofibers: The Multifaceted Approach for Advanced Biomedical Applications

Nanocarriers are gaining significant importance in the modern era of drug delivery. Nanofiber technology is one of the prime paradigms in nanotechnology for various biomedical and theranostic applications. Nanofibers obtained after successful electrospinning subjected to surface functionalized for drug delivery, biomedical, tissue engineering, biosensing, cell imaging and wound dressing application. Surface functionalization entirely changes physicochemical and biological properties of nanofibers. In physicochemical properties, wettability, melting point, glass transition temperature, and initial decomposition temperature significantly change offer several advantageous for nanofibers. Similarly, biological properties include cell adhesion, biocompatibility, and proliferation, also changes by functionalization of nanofibers. Various natural and synthetic materials polymers, metals, carbon materials, functional groups, proteins, and peptides, are currently used for surface modification of nanofibers. Various research studies across the globe demonstrated the usefulness of surface functionalized nanofibers in tissue engineering, wound healing, skin cancers, melanoma, and disease diagnosis. The delivery of drug through surface functionalized nanofibers results in improved permeation and bioavailability of drug which is important for better targeting of disease and therapeutic efficacy. This review provides a comprehensive insight about various techniques of surface functionalization of nanofibers along with its biomedical applications, toxicity assessment and global patent scenario

Genome-wide analysis of the class III peroxidase gene family in sesame and SiPRXs gene validation by expression analysis under drought stress

Sesame (Sesamum indicum) is an important indigenous oilseed crop but its growth and productivity are severely affected by abiotic stresses. Class III peroxidases are key stress related enzymes that exclusively occur in plant kingdom, however, their specific involvement in sesame remains largely unexplored. The present study aimed to identify the PRX gene family in sesame and elucidate their role in conferring drought stress tolerance in contrasting sesame accessions. Through genome-wide analysis of the PRX gene family, 45 non-redundant members (designated SiPRXs) were identified which were unequally distributed on 13 sesame chromosomes. Motif analysis revealed highly conserved peroxidase domains in all SiPRX proteins. To validate the function of identified SiPRX family members, sesame accessions were phenotyped under drought stress and irrigated conditions. The contrasting drought-tolerant and drought-sensitive accessions were used to study the relative transcript abundance of the selected 15 SiPRX genes by quantitative real-time PCR.Expression analysis revealed differential expression of SiPRX genes between drought-tolerant and drought-sensitive accessions, which was consistent with their physiological responses to drought stress. Our findings provide comprehensive insights into the genomic characterization of the SiPRX gene family in sesame with special reference to drought stress tolerance. These results emphasize the potential utility of SiPRX genes in enhancing drought resilience in sesame with implications for crop improvement strategies