The effect of cationic surfactant and some organic/inorganic additives on the morphology of mesostructured silica templated by pluronics

Cataloged from PDF version of article.Tri-block copolymers (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), represented as EOxPOyEOx), pluronics (F127=EO106PO70EO106, P65=EO20PO30EO20, P85=EO27PO39EO27, P103= EO17PO55EO17, and P123 = EO20PO70EO20) and cationic surfactants (cethyltrimethylammonium bromide (CTAB)), two surfactant systems, form complex micelles that self-assemble into mesostructured particles with distinct morphology depending on the pluronic type, the concentration of the cationic surfactant and the organic-inorganic ingredients in a siliceous reaction media under acidic conditions. The CTAB-P65 and CTAB-P85 systems form spheres, CTAB-P103 and CTAB-P123 systems form wormlike particles, and CTAB-F127 system form single crystals of mesostructured silica particles under very similar conditions. However addition of various salts (such as KCI and NaNO3) into a CTAB-P103 or CTAB-P123 solution system and cyclohexane and KCI into a CTAB-P85 solution system produces the mesostructured silica spheres and wormlike particles, respectively. By controlling the hydrophilic-hydrophobic character of the pluronics, core-corona interface, by means of additives, such as small organic molecules or salts, one could obtain the desired morphology that is dictated by the shape of the micelles of the pluronic-cationic surfactant complex. The effects of the additives and the formation mechanism of those morphologies have been discussed using spectroscopy (FT-IR and Raman), diffraction (XRD) and microscopy (POM and SEM) data. (c) 2008 Elsevier Inc. All rights reserved

Role of organic and inorganic additives on the assembly of CTAB-P123 and the morphology of mesoporous silica particles

Mesoporous silica particles with various morphologies and structures have been synthesized by controlling the solubility, micellization, and assembly of a charged surfactant (cethyltrimethylammonium bromide, CTAB) and a pluronic (PEO20PPO70PEO20, P123) couple using an organic (benzene) or an inorganic (SO4 2-, NO3 -, or Cl-) additive. The effect of CTAB, with or without one of the Hofmeister ions or benzene in various concentrations, on the morphology, pore-size, pore-structure and the nature of the silica particles has been investigated. Increasing the lyotropic anion (SO4 2-) or benzene concentration of the synthesis media creates wormlike particles with enlarged pores and reduced wall thickness. However, the hydrotropic anion (NO3 -) influenced the solubility of the charged surfactant and increased the CTAB concentration in the CTAB-P123 micelles, and as a result, in the mesoporous silica particles. The surface area, unit cell, and pore size of the silica particles are diminished by increasing the nitrate ion centration. The effects of the Cl- ion are between the SO4 2- and NO3 -ions. It influenced the P123 at low and CTAB at high concentrations. At low CTAB/ P123 mol ratios, the Cl- ion affects mainly the P123, but at high CTAB/P123 it affects both the CTAB and P123. By carefully adjusting these ingredients (CTAB, SO4 2-, Cl-, NO3 - and benzene), not only the morphology of the particles, but also the pore-size and pore-structure of the mesoporous silica particles could be adjusted. The investigations were carried out by preparing a series of powder samples and, by varying the CTAB/P123 mol ratio (between 3.0 and 6.0) and the concentration of the organic (0.17 to 0.90 M) or inorganic (at 0.25, 0.50, or 1.00 M) additive in the synthesis media. The powder samples were analyzed using microscopy (SEM, TEM, and POM), diffraction (PXRD), and spectroscopy (FTIR, Raman, UV-vis, and EDS) techniques toward above goals. © 2009 American Chemical Society

The role of desire thinking in the problematic use of social networking sites among adults.

The problematic use of social networking sites (SNS) is associated with several psychiatric disorders. This behavior closely resembles addiction in terms of neurological basis and behavioral patterns. Nevertheless, successful intervention strategies and the etiology of problematic SNS use are not yet thoroughly investigated. We aimed to study whether desire thinking is associated with problematic SNS use among adults when controlling for some confounders, including boredom, affect, and impulsivity. With the help of convenience sampling, we enrolled 546 Turkish adults in this study to whom we administered a sociodemographic form, the Social Media Addiction Scale (SMAS), the Leisure Boredom Scale (LBS), the Positive and Negative Affect Schedule (PANAS), the Barratt Impulsiveness Scale (BIS-11), and the Desire Thinking Questionnaire (DTQ). To explore the association between the variables, we performed Pearson correlational and hierarchical regression analyses. The results showed that higher scores on two sub-dimensions of desire thinking, namely verbal perseveration and imaginal prefiguration, were associated with higher scores on problematic SNS use after we controlled for boredom, affect, and impulsivity. This study demonstrates that desire thinking may play a role in problematic SNS use among adults. We recommend targeting desire thinking as a potential area in treatments which may help alleviate problematic SNS use. [Abstract copyright: © 2022 The Authors. Published by Elsevier Ltd.

Thin-walled commercially pure titanium structures: laser powder bed fusion process parameter optimization

Laser powder bed fusion (L-PBF) process parameters can be changeable depending on the part geometry due to thermal conductivity differences. The number of studies on the process parameter development for commercial pure titanium (Cp-Ti) with the L-PBF process is also quite limited in the literature. The aim of this study is to present a comprehensive process development for the production of Cp-Ti bulk and thin structures with the L-PBF technology. In the first phase, the right process parameters, including scan speed, laser power, hatch distance, and layer thickness, were identified with prismatic specimens with thin walls so that the obtained parameters could be used for both bulky sections and thin features such as lattice structures. The process parameters were varied to change the volumetric energy density from 19 to 208 J/mm3 among 80 different parameter sets. Parameter sets having a Volumetric Energy Density (VED) value between 32 J/mm3 and 47 J/mm3 gave almost fully dense Cp-Ti parts while the laser power was set to 200–250 W and the scan speed was used as 1000–1400 mm/s. Finally, Vickers hardness and tensile tests were applied to highly dense Cp-Ti parts. This study involving investigating the effect of process parameters on a wide range demonstrated that L-PBF is a favorable manufacturing technology for Cp-Ti parts with almost full density and good mechanical properties as well as good dimensional accuracy even on thin geometries. Moreover, the results show that combining parameters into a single one, i.e., VED, is not a proper way to optimize the process parameters since increasing laser power or decreasing the scan speed may alter the results, although VED is increased in both manners

Autologous anti-SOX2 antibody responses reflect intensity but not frequency of antigen expression in small cell lung cancer

Cataloged from PDF version of article.Background: Anti-SOX2 antibody responses are observed in about 10 to 20% of small cell lung cancer (SCLC) patients. The aim of this study was to determine whether such responses reflect a particular pattern of SOX2 protein expression in the tumor and whether this pattern associates with clinical outcome. Methods. Paraffin embedded tumor tissues, obtained from SCLC patients who had no evidence of paraneoplastic autoimmune degeneration, were evaluated for SOX2 expression by immunohistochemistry for both intensity and extent of staining. Sera from the same patients were tested for autologous antibodies against recombinant SOX2 by enzyme-linked immunosorbent assay (ELISA). Correlates between overall survival and various clinical parameters including SOX2 staining and serology were determined. Results: SOX2 protein expression was observed in tumor tissue in 89% of patients. Seventeen patients (29%) were seropositive for SOX2 antibodies and, in contrast to SOX2 staining, the presence of antibody correlated with limited disease stage (p = 0.05). SOX2 seropositivity showed a significant association with the intensity of SOX2 staining in the tumor (p = 0.02) but not with the frequency of SOX2 expressing cells. Conclusion: Anti-SOX2 antibodies associate with better prognosis (limited stage disease) while SOX2 protein expression does not; similar to reports from some earlier studies. Our data provides an explanation for this seemingly contrasting data for the first time as SOX2 antibodies can be observed in patients whose tumors contain relatively few but strongly staining cells, thus supporting the possible presence of active immune-surveillance and immune-editing targeting SOX2 protein in this tumor type. © 2014 Atakan et al.; licensee BioMed Central Ltd

Measurement of double-differential cross sections for top quark pair production in pp collisions at [Formula: see text][Formula: see text] and impact on parton distribution functions.

Normalized double-differential cross sections for top quark pair ([Formula: see text]) production are measured in pp collisions at a centre-of-mass energy of 8[Formula: see text] with the CMS experiment at the LHC. The analyzed data correspond to an integrated luminosity of 19.7[Formula: see text]. The measurement is performed in the dilepton [Formula: see text] final state. The [Formula: see text] cross section is determined as a function of various pairs of observables characterizing the kinematics of the top quark and [Formula: see text] system. The data are compared to calculations using perturbative quantum chromodynamics at next-to-leading and approximate next-to-next-to-leading orders. They are also compared to predictions of Monte Carlo event generators that complement fixed-order computations with parton showers, hadronization, and multiple-parton interactions. Overall agreement is observed with the predictions, which is improved when the latest global sets of proton parton distribution functions are used. The inclusion of the measured [Formula: see text] cross sections in a fit of parametrized parton distribution functions is shown to have significant impact on the gluon distribution

Measurement of the [Formula: see text] production cross section using events in the [Formula: see text] final state in pp collisions at [Formula: see text].

The cross section of top quark-antiquark pair production in proton-proton collisions at [Formula: see text] is measured by the CMS experiment at the LHC, using data corresponding to an integrated luminosity of 2.2[Formula: see text]. The measurement is performed by analyzing events in which the final state includes one electron, one muon, and two or more jets, at least one of which is identified as originating from hadronization of a b quark. The measured cross section is [Formula: see text], in agreement with the expectation from the standard model

Measurement of prompt and nonprompt [Formula: see text] production in [Formula: see text] and [Formula: see text] collisions at [Formula: see text].

This paper reports the measurement of [Formula: see text] meson production in proton-proton ([Formula: see text]) and proton-lead ([Formula: see text]) collisions at a center-of-mass energy per nucleon pair of [Formula: see text] by the CMS experiment at the LHC. The data samples used in the analysis correspond to integrated luminosities of 28[Formula: see text] and 35[Formula: see text] for [Formula: see text] and [Formula: see text] collisions, respectively. Prompt and nonprompt [Formula: see text] mesons, the latter produced in the decay of [Formula: see text] hadrons, are measured in their dimuon decay channels. Differential cross sections are measured in the transverse momentum range of [Formula: see text], and center-of-mass rapidity ranges of [Formula: see text] ([Formula: see text]) and [Formula: see text] ([Formula: see text]). The nuclear modification factor, [Formula: see text], is measured as a function of both [Formula: see text] and [Formula: see text]. Small modifications to the [Formula: see text] cross sections are observed in [Formula: see text] relative to [Formula: see text] collisions. The ratio of [Formula: see text] production cross sections in [Formula: see text]-going and Pb-going directions, [Formula: see text], studied as functions of [Formula: see text] and [Formula: see text], shows a significant decrease for increasing transverse energy deposited at large pseudorapidities. These results, which cover a wide kinematic range, provide new insight on the role of cold nuclear matter effects on prompt and nonprompt [Formula: see text] production