Differential Light Shift Cancellation in a Magnetic-Field-Insensitive Transition of 87^{87}Rb

We demonstrate near-complete cancellation of the differential light shift of a two-photon magnetic-field-insensitive microwave hyperfine (clock) transition in $^{87}$Rb atoms trapped in an optical lattice. Up to $95(2)$ of the differential light shift is canceled while maintaining magnetic-field insensitivity. This technique should have applications in quantum information and frequency metrology.Comment: 5 pages, 4 figure

Multicomponent reaction-diffusion processes on complex networks

We study the reaction-diffusion process $A + B \to \emptyset$ on uncorrelated scale-free networks analytically. By a mean-field ansatz we derive analytical expressions for the particle pair-correlations and the particle density. Expressing the time evolution of the particle density in terms of the instantaneous particle pair-correlations, we determine analytically the `jamming' effect which arises in the case of multicomponent, pair-wise reactions. Comparing the relevant terms within the differential equation for the particle density, we find that the `jamming' effect diminishes in the long-time, low-density limit. This even holds true for the hubs of the network, despite that the hubs dynamically attract the particles.Comment: 8 pages, 6 figure

Enhancing heat treatment efficacy for insect pest control: A case study of a CFD application to improve the design and structure of a flour mill

Heat treatment of the indoor environment of flour mills is an alternative technique to chemical fumigation for controlling insect pests. The aim of this research was to assess temperature distribution inside a flour mill during a heat treatment for insect pest control by computational fluid dynamics (CFD) modelling and simulation. The model was validated by using the average values of experimental data acquired during a heat treatment carried out in a flour mill, which is representative of the building materials and techniques used in the milling industry of South Italy. Simulations were carried out in steady-state conditions, and simulated data were validated by the average values of air and wall temperature measurements. Since the modelled temperature distribution in the mill fit the real one with a good accuracy (maximum error equal to 2.57 °C), the CFD model was considered reliable to simulate other operating conditions. Since it was observed that the internal surface temperatures of the mill were much lower than the value required for the success of the heat treatment, equal to 45 °C, the CFD model could be used for improving the effectiveness of heat treatments in the flour mill. Application of the proposed CFD model in the simulation of specific interventions could be aimed at improving both building performance and fan heaters' localisatio,n in order to find the best configuration

Improving natural ventilation in renovated free-stall barns for dairy cows: Optimized building solutions by using a validated computational fluid dynamics model

Natural ventilation is the most used system to create suitable conditions, removing gases, introducing oxygen in livestock buildings. Its efficiency depends on several factors and above all on the number, the dimensions and the position of wall openings and internal layout of livestock buildings. The aim of this research was to develop optimized layout solutions for improving natural ventilation effectiveness in free-stall barns for dairy cows by using a CFD approach. A validated computational fluid dynamics (CFD) model was applied in a case study which is highly representative of building interventions for renovating the layout of free-stall barns for dairy cows located in an area of the Mediterranean basin. Firstly, dairy cow behaviour was analysed by visual examination of time-lapse video-recordings. Then, simulations were carried out by using the validated CFD model and changing the position of internal and external building elements (i.e., internal office and external buildings for milking) in order to find the best condition for the thermal comfort of the animals. The results showed that the best conditions were recorded for a new configuration of the building in terms of air velocity distribution within the resting area, the service alley and the feeding alley for dairy cows, and in the pens for calves. In this new layout, the office areas and the north-west wall openings were located by mirroring them along the transversal axis of the barn. Therefore, the CFD approach proposed in this study could be used during the design phase, as a decision support system aimed at improving the natural ventilation within the barn

Development of a CFD model to simulate natural ventilation in a semi-open free-stall barn for dairy cows

Natural ventilation is the most common passive cooling system in livestock buildings. The aim of this research is to assess airflow distribution inside a free-stall barn for dairy cows by computational fluid dynamics (CFD) modelling and simulation. The model is validated by using the average values of experimental data acquired in a free-stall barn, which is considered relevant because it is located in a region characterised by hot climate conditions during the summer that could induce animal heat stress. Simulations are carried out in steady-state conditions, and simulated data are validated by the average values of air velocity measurements. Since the modelled air velocity distribution in the barn fits the real one well, the CFD model is considered reliable to simulate other conditions. The application of the proposed CFD model in the simulation of specific building design alternatives could be aimed at studying the related airflow distribution in order to find the best configuration

Application of a CFD validated model to plan fan heater position within flour mills during a heat treatment for insect pest control

The development of environmentally-friendly methods as alternatives to chemical fumigation for controlling insect pests has attracted public attention. Among these methods, heat treatment is based on the use of fan heaters that are positioned by operators who typically establish their number and position within buildings to be treated. The aim of this research was to improve heat treatment effectiveness by applying a validated computational fluid dynamics (CFD) model for planning fan heater positions within the building environment. Based on a CFD model, which was built and validated according to experimental data acquired during heat treatment of a flour mill, simulations were carried out by changing the position and/or rotation of fan heaters with the aim of enhancing temperature distribution inside the building. The results showed that in some simulations the percentage of internal wall surfaces having a temperature value lower than that required for heat treatment efficacy was considerably reduced, by up to 56.7%. Therefore, the CFD approach proposed in this study could be used as a decision support system for improving heat treatment efficacy

No black hole information puzzle in a relational universe

The introduction of a relational time in quantum gravity naturally implies that pure quantum states evolve into mixed quantum states. We show, using a recently proposed concrete implementation, that the rate at which pure states naturally evolve into mixed ones is faster than that due to collapsing into a black hole that later evaporates. This is rather remarkable since the fundamental mechanism for decoherence is usually very weak. Therefore the ``black hole information puzzle'' is rendered de-facto unobservable.Comment: 4 pages, no figures, revte

Reconstruction of protein structures from a vectorial representation

We show that the contact map of the native structure of globular proteins can be reconstructed starting from the sole knowledge of the contact map's principal eigenvector, and present an exact algorithm for this purpose. Our algorithm yields a unique contact map for all 221 globular structures of PDBselect25 of length $N \le 120$. We also show that the reconstructed contact maps allow in turn for the accurate reconstruction of the three-dimensional structure. These results indicate that the reduced vectorial representation provided by the principal eigenvector of the contact map is equivalent to the protein structure itself. This representation is expected to provide a useful tool in bioinformatics algorithms for protein structure comparison and alignment, as well as a promising intermediate step towards protein structure prediction.Comment: 4 pages, 1 figur