Failure Analysis of Discrete Damaged Tailored Extension-Shear-Coupled Stiffened Composite Panels

The results of an analytical and experimental investigation of the failure of composite is tiffener panels with extension-shear coupling are presented. This tailored concept, when used in the cover skins of a tiltrotor aircraft wing has the potential for increasing the aeroelastic stability margins and improving the aircraft productivity. The extension-shear coupling is achieved by using unbalanced 45 plies in the skin. The failure analysis of two tailored panel configurations that have the center stringer and adjacent skin severed is presented. Finite element analysis of the damaged panels was conducted using STAGS (STructural Analysis of General Shells) general purpose finite element program that includes a progressive failure capability for laminated composite structures that is based on point-stress analysis, traditional failure criteria, and ply discounting for material degradation. The progressive failure predicted the path of the failure and maximum load capability. There is less than 12 percent difference between the predicted failure load and experimental failure load. There is a good match of the panel stiffness and strength between the progressive failure analysis and the experimental results. The results indicate that the tailored concept would be feasible to use in the wing skin of a tiltrotor aircraft

Preparation of progressive antibacterial LDPE surface via active biomolecule deposition approach

The use of polymers in all aspects of daily life is increasing considerably, so there is high demand for polymers with specific properties. Polymers with antibacterial properties are highly needed in the food and medical industries. Low-density polyethylene (LDPE) is widely used in various industries, especially in food packaging, because it has suitable mechanical and safety properties. Nevertheless, the hydrophobicity of its surface makes it vulnerable to microbial attack and culturing. To enhance antimicrobial activity, a progressive surface modification of LDPE using the antimicrobial agent grafting process was applied. LDPE was first exposed to nonthermal radio-frequency (RF) plasma treatment to activate its surface. This led to the creation of reactive species on the LDPE surface, resulting in the ability to graft antibacterial agents, such as ascorbic acid (ASA), commonly known as vitamin C. ASA is a well-known antioxidant that is used as a food preservative, is essential to biological systems, and is found to be reactive against a number of microorganisms and bacteria. The antimicrobial effect of grafted LDPE with ASA was tested against two strong kinds of bacteria, namely, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), with positive results. Surface analyses were performed thoroughly using contact angle measurements and peel tests to measure the wettability or surface free energy and adhesion properties after each modification step. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to analyze the surface morphology or topography changes of LDPE caused by plasma treatment and ASA grafting. Surface chemistry was studied by measuring the functional groups and elements introduced to the surface after plasma treatment and ASA grafting, using Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). These results showed wettability, adhesion, and roughness changes in the LDPE surface after plasma treatment, as well as after ASA grafting. This is a positive indicator of the ability of ASA to be grafted onto polymeric materials using plasma pretreatment, resulting in enhanced antibacterial activity. - 2019 by the authors.Funding: This publication was made possible by Award JSREP07-022-3-010 and NPRP10-0205-170349 from the Qatar National Research Fund (a member of The Qatar Foundation). The statements made herein are solely the responsibility of the authors

Transmission dynamics of an insect-specific flavivirus in a naturally infected Culex pipiens laboratory colony and effects of co-infection on vector competence for West Nile virus

AbstractWe established a laboratory colony of Culex pipiens mosquitoes from eggs collected in Colorado and discovered that mosquitoes in the colony are naturally infected with Culex flavivirus (CxFV), an insect-specific flavivirus. In this study we examined transmission dynamics of CxFV and effects of persistent CxFV infection on vector competence for West Nile virus (WNV). We found that vertical transmission is the primary mechanism for persistence of CxFV in Cx. pipiens, with venereal transmission potentially playing a minor role. Vector competence experiments indicated possible early suppression of WNV replication by persistent CxFV infection in Cx. pipiens. This is the first description of insect-specific flavivirus transmission dynamics in a naturally infected mosquito colony and the observation of delayed dissemination of superinfecting WNV suggests that the presence of CxFV may impact the intensity of enzootic transmission of WNV and the risk of human exposure to this important pathogen

On composite laminates with extensional anisotropy

The definite list of extensionally (membrane) anisotropic composite laminates with up to 21 plies is presented. The listings comprise of individual stacking sequences, which are characterized in terms of angle- and cross-ply sub-sequence relationships as well as the blend-ratio of unbalanced angle-plies. Dimensionless parameters, including lamination parameters, are provided, from which the extensional and bending stiffness terms are readily calculated and an assessment of the bending stiffness efficiency made for angle- and cross-ply sub-sequences. Comparisons are made between the structural response of extensionally-anisotropic laminates and laminates with both extensional- and bending-anisotropy; Initial- and post-buckling responses are considered at the panel level together with the static response of a complete wing-box structure

Novel application of X-ray fluorescence microscopy (XFM) for the non-destructive micro-elemental analysis of natural mineral pigments on Aboriginal Australian objects

Open Access Article. This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.This manuscript presents the first non-destructive synchrotron micro-X-ray fluorescence study of natural mineral pigments on Aboriginal Australian objects. Our results demonstrate the advantage of XFM (X-ray fluorescence microscopy) of Aboriginal Australian objects for optimum sensitivity, elemental analysis, micron-resolution mapping of pigment areas and the method also has the advantage of being non-destructive to the cultural heritage objects. Estimates of pigment thickness can be calculated. In addition, based on the elemental maps of the pigments, further conclusions can be drawn on the composition and mixtures and uses of natural mineral pigments and whether the objects were made using traditional or modern methods and materials. This manuscript highlights the results of this first application of XFM to investigate complex mineral pigments used on Aboriginal Australian objects

A case study of bovine tuberculosis in an area of County Donegal, Ireland

A descriptive analysis, to investigate the potential risk factors that might have contributed to the increased incidence of bovine tuberculosis (BTB) herd-breakdowns in the reference area of Co. Donegal during the fifth year of the four-area project (FAP), was performed. Seventy two different herds were restricted for BTB during the FAP; 10 of these herds were restricted twice, resulting in a total of 82 BTB breakdowns. During the first four years of the FAP, the number of BTB herd breakdowns in the area varied from a lowest of nine to a maximum of 18 per year, and were geographically dispersed. In the fifth year of the study a considerable increase in the number of BTB breakdowns (n = 32) was observed, and there was a spatial 'cluster' of infected herds in the eastern part of the study area. The increased number of BTB breakdowns during the fifth year most likely occurred because of the recrudescence of infection, herd-to-herd transmission and, to a lesser extent, purchase of infected cattle. Infected badgers remain as a possible but less likely source of infection, especially as an explanation for the cluster of infected herds. The analysis supports the hypothesis that BTB in herds is a problem that cannot be addressed successfully by dedicating our efforts to the elimination of single risk factors. Neither is it a problem that needs to be investigated only at the herd level, but rather at the area level, including groups of contiguous herds

Isolated talonavicular arthrodesis in patients with rheumatoid arthritis of the foot and tibialis posterior tendon dysfunction

<p>Abstract</p> <p>Background</p> <p>The foot is often affected in patients with rheumatoid arthritis. Subtalar joints are involved more frequently than ankle joints. Deformities of subtalar joints often lead to painful flatfoot and valgus deformity of the heel. Major contributors to the early development of foot deformities include talonavicular joint destruction and tibialis posterior tendon dysfunction, mainly due to its rupture.</p> <p>Methods</p> <p>Between 2002 and 2005 we performed isolated talonavicular arthrodesis in 26 patients; twenty women and six men. Tibialis posterior tendon dysfunction was diagnosed preoperatively by physical examination and by MRI. Talonavicular fusion was achieved via screws in eight patients, memory staples in twelve patients and a combination of screws and memory staples in six cases. The average duration of immobilization after the surgery was four weeks, followed by rehabilitation. Full weight bearing was allowed two to three months after surgery.</p> <p>Results</p> <p>The mean age of the group at the time of the surgery was 43.6 years. MRI examination revealed a torn tendon in nine cases with no significant destruction of the talonavicular joint seen on X-rays. Mean of postoperative followup was 4.5 years (3 to 7 years). The mean of AOFAS Hindfoot score improved from 48.2 preoperatively to 88.6 points at the last postoperative followup. Eighteen patients had excellent results (none, mild occasional pain), six patients had moderate pain of the foot and two patients had severe pain in evaluation with the score. Complications included superficial wound infections in two patients and a nonunion developed in one case.</p> <p>Conclusions</p> <p>Early isolated talonavicular arthrodesis provides excellent pain relief and prevents further progression of the foot deformities in patients with rheumatoid arthritis and tibialis posterior tendon dysfunction.</p

The acute effects of alcohol on auditory thresholds

There is very little knowledge about alcohol-induced hearing loss. Alcohol consumption and tolerance to loud noise is a well observed phenomenon as seen in the Western world where parties get noisier by the hour as the evening matures. This leads to increase in the referrals to the "hearing aid clinic" and the diagnosis of "cocktail party deafness" which may not necessarily be only due to presbyacusis or noise-induced hearing loss

Prevalence of tuberculous lesion in cattle slaughtered in Mubende district, Uganda

BACKGROUND: The aim of this study was to estimate the prevalence of gross pathology suggestive of bovine tuberculosis (TB-like lesions) and evaluate animal’s characteristics associated with the risk of having bovine TB-like lesions among cattle slaughtered in Mubende district in the Uganda cattle corridor. METHOD: We conducted a cross sectional study in which 1,576 slaughtered cattle in Mubende district municipal abattoir underwent post-mortem inspection between August 2013 and January 2014. The presence of bovine TB-like lesions in addition to the animal’s sex, age, breed, and sub-county of origin prior to slaughter were recorded. Associations between the presence of bovine TB-like lesions and animal’s age, sex, breed, and sub-county of origin prior to slaughter were initially analysed using a univariable approach with the chi-square test, and subsequently with a multivariable logistic regression model to assess the combined impact of these animal characteristics with the risk of having a bovine TB-like lesion. Additionally, and as a secondary objective, tissue samples were collected from all carcases that had a bovine TB-like lesion and were processed using standard Mycobacterium culture and identification methods. The culture and acid fast positive samples were tested using Capilia TB-neo® assay to identify Mycobacterium tuberculosis complex (MTC). RESULTS: Of 1,576 carcasses inspected, 9.7% (153/1,576) had bovine TB-like lesions from which Mycobacterium spp and Mycobacterium Tuberculosis Complex (MTC) were isolated in 13 (8.4%) and 12 (7.8%) respectively. Bovine TB-like lesions were more likely to be found in females (OR = 1.49, OR 95% CI: 1.06–2.13) and in older cattle (OR = 2.5, 95% CI: 1.64–3.7). When compared to Ankole cattle, Cross breed (OR = 6.5, OR 95% CI: 3.37–12.7) and Zebu cattle (OR = 2.57, 95% CI: 1.78–3.72) had higher odds of having bovine TB-like lesions. Animals from Kasanda (OR = 2.5, 95% CI: 1.52–4.17) were more likely to have bovine TB-like lesions than cattle from Kasambya. CONCLUSIONS: The findings of study reveals that approximately one in ten slaughtered cattle presents with gross pathology suggestive of bovine TB in Mubende district in the Uganda cattle corridor district, however, we isolated MTC in only 8.4% of these bovine TB-like lesions. Therefore, there is a need to understand the cause of all the other bovine TB-like lesions in order to safe guard diagnostic integrity of meat inspection in Uganda

Bioavailability in soils

The consumption of locally-produced vegetables by humans may be an important exposure pathway for soil contaminants in many urban settings and for agricultural land use. Hence, prediction of metal and metalloid uptake by vegetables from contaminated soils is an important part of the Human Health Risk Assessment procedure. The behaviour of metals (cadmium, chromium, cobalt, copper, mercury, molybdenum, nickel, lead and zinc) and metalloids (arsenic, boron and selenium) in contaminated soils depends to a large extent on the intrinsic charge, valence and speciation of the contaminant ion, and soil properties such as pH, redox status and contents of clay and/or organic matter. However, chemistry and behaviour of the contaminant in soil alone cannot predict soil-to-plant transfer. Root uptake, root selectivity, ion interactions, rhizosphere processes, leaf uptake from the atmosphere, and plant partitioning are important processes that ultimately govern the accumulation ofmetals and metalloids in edible vegetable tissues. Mechanistic models to accurately describe all these processes have not yet been developed, let alone validated under field conditions. Hence, to estimate risks by vegetable consumption, empirical models have been used to correlate concentrations of metals and metalloids in contaminated soils, soil physico-chemical characteristics, and concentrations of elements in vegetable tissues. These models should only be used within the bounds of their calibration, and often need to be re-calibrated or validated using local soil and environmental conditions on a regional or site-specific basis.Mike J. McLaughlin, Erik Smolders, Fien Degryse, and Rene Rietr