20 research outputs found
Scaling craters in carbonates: Electron paramagnetic resonance analysis of shock damage
Carbonate samples from the 8.9-Mt nuclear (near-surface explosion) crater, OAK, and a terrestrial impact crater, Meteor Crater, were analyzed for shock damage using electron paramagnetic resonance (EPR). Samples from below the OAK apparent crater floor were obtained from six boreholes, as well as ejecta recovered from the crater floor. The degree of shock damage in the carbonate material was assessed by comparing the sample spectra to spectra of Solenhofen and Kaibab limestone, which had been shocked to known pressures. Analysis of the OAK Crater borehole samples has identified a thin zone of allocthonous highly shocked (10–13 GPa) carbonate material underneath the apparent crater floor. This ∼5- to 15-m-thick zone occurs at a maximum depth of ∼125 m below current seafloor at the borehole, sited at the initial position of the OAK explosive, and decreases in depth towards the apparent crater edge. Because this zone of allocthonous shocked rock delineates deformed rock below, and a breccia of mobilized sand and collapse debris above, it appears to outline the transient crater. The transient crater volume inferred in this way is found to be 3.2±0.2×10^6 m^3, which is in good agreement with a volume of 5.3×10^6 m^3 inferred from gravity scaling of laboratory experiments [Schmidt et al., 1986]. A layer of highly shocked material is also found near the surface outside the crater. The latter material could represent a fallout ejecta layer. The ejecta boulders recovered from the present crater floor experienced a range of shock pressures from ∼0 to 15 GPa with the more heavily shocked samples all occurring between radii of 360 and ∼600 m. Moreover, the fossil content, lithology, and Sr isotopic composition all demonstrate that the initial position of the bulk of the heavily shocked rock ejecta sampled was originally near surface rock at initial depths in the 32 to 45-m depth (below sea level) range. The EPR technique is also sensitive to prehistoric shock damage. This is demonstrated by our study of shocked Kaibab limestone from the 49,000-year-old Meteor (Barringer) Crater Arizona. We found shock damage present in the β member of the Kaibab Formation exposed in the crater walls corresponding to peak shock stress in the 0.3- to 0.6 GPa range. Carbonate ejecta recovered from within the crater experienced shock pressures of up to 0.6 GPa. Assuming shock damage levels of 0.3 to 0.6 GPa for the lightly shocked carbonate on the walls of the Meteor crater, combined with the shock pressure versus distance model of Moss [1988] and Lamb et al. [1991], Meteor Crater impact energies of 2.4 to 8.9 Mt are obtained. This approximately agrees with energies of 3.3 to 7.1 Mt calculated from the crater scaling of Schmidt and Housen [1987]
Spall velocity measurements from laboratory impact craters
Spall velocities were measured for a series of impacts into San Marcos gabbro. Impact velocities ranged from 1 to 6.5 km/sec. Projectiles varied in material and size with a maximum mass of 4g for a lead bullet to a minimum of 0.04 g for an aluminum sphere. The spall velocities were calculated both from measurements taken from films of the events and from estimates based on range measurements of the spall fragments. The maximum spall velocity observed was 27 m/sec, or 0.5 percent of the impact velocity. The measured spall velocities were within the range predicted by the Melosh (1984) spallation model for the given experimental parameters. The compatability between the Melosh model for large planetary impacts and the results of these small scale experiments is considered in detail. The targets were also bisected to observe the internal fractures. A series of fractures were observed whose location coincided with the boundary of the theoretical near surface zone predicted by Melosh. Above this boundary the target material should receive reduced levels of compressive stress as compared to the more highly shocked region below
Ceres' opposition effect observed by the Dawn framing camera
The surface reflectance of planetary regoliths may increase dramatically
towards zero phase angle, a phenomenon known as the opposition effect (OE). Two
physical processes that are thought to be the dominant contributors to the
brightness surge are shadow hiding (SH) and coherent backscatter (CB). The
occurrence of shadow hiding in planetary regoliths is self-evident, but it has
proved difficult to unambiguously demonstrate CB from remote sensing
observations. One prediction of CB theory is the wavelength dependence of the
OE angular width. The Dawn spacecraft observed the OE on the surface of dwarf
planet Ceres. We characterize the OE over the resolved surface, including the
bright Cerealia Facula, and to find evidence for SH and/or CB. We analyze
images of the Dawn framing camera by means of photometric modeling of the phase
curve. We find that the OE of most of the investigated surface has very similar
characteristics, with an enhancement factor of 1.4 and a FWHM of 3{\deg} (broad
OE). A notable exception are the fresh ejecta of the Azacca crater, which
display a very narrow brightness enhancement that is restricted to phase angles
{\deg} (narrow OE); suggestively, this is in the range in which CB is
thought to dominate. We do not find a wavelength dependence for the width of
the broad OE, and lack the data to investigate the dependence for the narrow
OE. The prediction of a wavelength-dependent CB width is rather ambiguous. The
zero-phase observations allow us to determine Ceres' visible geometric albedo
as . A comparison with other asteroids suggests that
Ceres' broad OE is typical for an asteroid of its spectral type, with
characteristics that are primarily linked to surface albedo. Our analysis
suggests that CB may occur on the dark surface of Ceres in a highly localized
fashion.Comment: Credit: Schr\"oder et al, A&A in press, 2018, reproduced with
permission, \copyright ES
The Psyche Topography and Geomorphology Investigation
Detailed mapping of topography is crucial for the understanding of processes shaping the surfaces of planetary bodies. In particular, stereoscopic imagery makes a major contribution to topographic mapping and especially supports the geologic characterization of planetary surfaces. Image data provide the basis for extensive studies of the surface structure and morphology on local, regional and global scales using photogeologic information from images, the topographic information from stereo-derived digital terrain models and co-registered spectral terrain information from color images. The objective of the Psyche topography and geomorphology investigation is to derive the detailed shape of (16) Psyche to generate orthorectified image mosaics, which are needed to study the asteroids’ landforms, interior structure, and the processes that have modified the surface over geologic time. In this paper we describe our approaches for producing shape models, and our plans for acquiring requested image data to quantify the expected accuracy of the results. Multi-angle images obtained by Psyche’s camera will be used to create topographic models with about 15 m/pixel horizontal resolution and better than 10 m height accuracy on a global scale. This is slightly better as global imaging obtained during the Dawn mission, however, both missions yield resolutions of a few m/pixel locally. Two different techniques, stereophotogrammetry and stereophotoclinometry, are used to model the shape; these models will be merged with the gravity fields obtained by the Psyche spacecraft to produce geodetically controlled topographic models. The resulting digital topography models, together with the gravity data, will reveal the tectonic, volcanic, impact, and gradational history of Psyche, and enable co-registration of data sets to determine Psyche’s geologic history
Variations in the amount of water ice on Ceres' surface suggest a seasonal water cycle.
The dwarf planet Ceres is known to host a considerable amount of water in its interior, and areas of water ice were detected by the Dawn spacecraft on its surface. Moreover, sporadic water and hydroxyl emissions have been observed from space telescopes. We report the detection of water ice in a mid-latitude crater and its unexpected variation with time. The Dawn spectrometer data show a change of water ice signatures over a period of 6 months, which is well modeled as ~2-km2 increase of water ice. The observed increase, coupled with Ceres' orbital parameters, points to an ongoing process that seems correlated with solar flux. The reported variation on Ceres' surface indicates that this body is chemically and physically active at the present time
Scaling craters in carbonates: Electron paramagnetic resonance analysis of shock damage
Mars Odyssey: Off-nadir Imaging
Science Objectives for off-nadir imaging: a) Daily observations of high activity and high interest targets in the Polar Regions; b) Daily imaging of regions of gas jetting through vents and the formation of dark spots and fans; c) Increases likelihood of observing these processes in an active phase; d) Stereo imaging for geographical analysis and landing site characterization; and e) Fill in existing gaps and gores
Impact Spallation Experiments: Fracture Patterns and Spall Velocities
Spall velocities were measured for nine experimental impacts into San Marcos gabbro targets. Impact velocities ranged from 1 to 6.5 km/sec. Projectiles were iron, aluminum, lead, and basalt of varying sizes. The projectile masses ranged from a 4-g lead bullet to a 0.04-g aluminum sphere. The velocities of fragments were measured from high-speed films taken of the events. The maximum spall velocity observed was 30 m/sec, or 0.56 percent of the 5.4 km/sec impact velocity. The measured velocities were compared to the spall velocities predicted by the spallation model of Melosh (1984). The compatibility between the spallation model for large planetary impacts and the results of these small-scale experiments is considered in detail. The targets were also bisected to observe the pattern of internal fractures. The series of fractures was observed, whose location coincided with the boundary between rock subjected to the peak shock compression and a theoretical “near-surface zone” predicted by the spallation model. According to the model, between this boundary and the free surface, the target material is expected to have received reduced levels of compressive stress as compared to the more highly shocked region below
Science Opportunity Analyzer (SOA): Science Planning Made Simple
.For the first time at JPL, the Cassini mission to Saturn is using distributed science operations for developing their experiments. Remote scientists needed the ability to: a) Identify observation opportunities; b) Create accurate, detailed designs for their observations; c) Verify that their designs meet their objectives; d) Check their observations against project flight rules and constraints; e) Communicate their observations to other scientists. Many existing tools provide one or more of these functions, but Science Opportunity Analyzer (SOA) has been built to unify these tasks into a single application. Accurate: Utilizes JPL Navigation and Ancillary Information Facility (NAIF) SPICE* software tool kit - Provides high fidelity modeling. - Facilitates rapid adaptation to other flight projects. Portable: Available in Unix, Windows and Linux. Adaptable: Designed to be a multi-mission tool so it can be readily adapted to other flight projects. Implemented in Java, Java 3D and other innovative technologies. Conclusion: SOA is easy to use. It only requires 6 simple steps. SOA's ability to show the same accurate information in multiple ways (multiple visualization formats, data plots, listings and file output) is essential to meet the needs of a diverse, distributed science operations environment
Observation Planning Made Simple with Science Opportunity Analyzer (SOA)
As NASA undertakes the exploration of the Moon and Mars as well as the rest of the Solar System while continuing to investigate Earth's oceans, winds, atmosphere, weather, etc., the ever-existing need to allow operations users to easily define their observations increases. Operation teams need to be able to determine the best time to perform an observation, as well as its duration and other parameters such as the observation target. In addition, operations teams need to be able to check the observation for validity against objectives and intent as well as spacecraft constraints such as turn rates and acceleration or pointing exclusion zones. Science Opportunity Analyzer (SOA), in development for the last six years, is a multi-mission toolset that has been built to meet those needs. The operations team can follow six simple steps and define his/her observation without having to know the complexities of orbital mechanics, coordinate transformations, or the spacecraft itself