One-dimensional numerical analysis of the transient thermal response of multilayer insulative systems

A one-dimensional numerical analysis of the transient thermal response of multilayer insulative systems has been developed. The analysis can determine the temperature distribution through a system consisting of from one to four layers, one of which can be an air gap. Concentrated heat sinks at any interface can be included. The computer program based on the analysis will determine the thickness of a specified layer that will satisfy a temperature limit criterion at any point in the insulative system. The program will also automatically calculate the thickness at several points on a vehicle and determine total system mass

Evaluation of a low-density polyimide foam in a dynamic, high temperature environment

A low density polyimide foam material was tested in an arc tunnel to determine its potential for heat shield application on aerospace vehicles. The results show that the material has some reuse potential at surface temperatures as high as 750 K. When a black refractory paint was applied to the surface of the material, the surface recession was negligible at 750 K. An analytical thermal conductivity was derived for this material which, combined with measured thermal property values, can be used to make preliminary design thickness calculations for heat shield applications

Surface recession characteristics of a cryogenic insulation subjected to arc-tunnel heating

Specimens of a cryogenic insulation, proposed for use on the space shuttle external tank, were tested in an arc tunnel over a range of heating rates, pressures, and enthalpies corresponding to the shuttle ascent environment. A regression analysis was used to correlate the test data. Correlation equations involving surface recession rate as a function of heating rate, pressure, and enthalpy were developed. These equations can be used to make total surface recession predictions for shuttle ascent flight environments

Analytical determination of the effect of thermal property variations on the performance of a charring ablator

Effects of thermal-property variations on performance of charring ablato

Verification tests of durable TPS concepts

Titanium multiwall, superalloy honeycomb, and Advanced Carbon-carbon (ACC) multipost Thermal Protection System (TPS) concepts are being developed to provide durable protection for surfaces of future space transportation systems. Verification tests including thermal, vibration, acoustic, water absorption, lightning strike, and aerothermal tests are described. Preliminary results indicate that the three TPS concepts are viable up to a surface temperature in excess of 2300 F

Experimental Controlled-NOT Logic Gate for Single Photons in the Coincidence Basis

We report a proof-of-principle demonstration of a probabilistic controlled-NOT gate for single photons. Single-photon control and target qubits were mixed with a single ancilla photon in a device constructed using only linear optical elements. The successful operation of the controlled-NOT gate relied on post-selected three-photon interference effects which required the detection of the photons in the output modes.Comment: 4 pages, 4 figures; minor change

Experimental Demonstration of a Quantum Circuit using Linear Optics Gates

One of the main advantages of an optical approach to quantum computing is the fact that optical fibers can be used to connect the logic and memory devices to form useful circuits, in analogy with the wires of a conventional computer. Here we describe an experimental demonstration of a simple quantum circuit of that kind in which two probabilistic exclusive-OR (XOR) logic gates were combined to calculate the parity of three input qubits.Comment: v2 is final PRA versio

Probabilistic Quantum Encoder for Single-Photon Qubits

We describe an experiment in which a physical qubit represented by the polarization state of a single-photon was probabilistically encoded in the logical state of two photons. The experiment relied on linear optics, post-selection, and three-photon interference effects produced by a parametric down-conversion photon pair and a weak coherent state. An interesting consequence of the encoding operation was the ability to observe entangled three-photon Greenberger-Horne-Zeilinger states.Comment: 4 pages, 4 figures; submitted to Phys. Rev.

Linear optics implementation of general two-photon projective measurement

We will present a method of implementation of general projective measurement of two-photon polarization state with the use of linear optics elements only. The scheme presented succeeds with a probability of at least 1/16. For some specific measurements, (e.g. parity measurement) this probability reaches 1/4.Comment: 8 page

The far field diffraction pattern for corner reflectors with complex reflection coefficients

The far field diffraction pattern of a geometrically perfect corner reflector is examined analytically for normally incident monochromatic light. The states of polarization and the complex amplitudes of the emerging light are expressed through transformation matrices in terms of those of the original incident light for each sextant of the face in a single coordinate system. The analytic expression of the total diffraction pattern is obtained for a circular face. This expression consists of three component functions in addition to the basic Airy function. The coefficient of each function is expressed in terms of complex coefficients of reflectance of the reflecting surface. Some numerical results for different reflecting surfaces, including total internal reflection, are presented. The iso-intensity contours of the diffraction pattern evaluated from the analytical expressions for an uncoated solid corner reflector are also presented along with the photographs of the pattern