Photocatalytic applications with CdS•block copolymer/exfoliated graphene nanoensembles: Hydrogen generation and degradation of Rhodamine B

Amphiphilic block copolymer poly (isoprene-b-acrylic acid) (PI-b-PAA) stabilized exfoliated graphene in water and allowed the immobilization of semiconductor CdS nanoparticles forming CdS•PI-b-PAA/graphene. Characterization with HR-TEM and EDX justified the success of preparation and revealed the presence of spherical CdS. Moreover, UV-Vis and photoluminescence assays suggested that electronic interactions within CdS•PI-b-PAA/graphene exist as evidenced by the significant quenching of the characteristic emission of CdS by exfoliated graphene. Photoillumination of CdS•PI-b-PAA/graphene, in the presence of ammonium formate as quencher for the photogenerated holes, resulted on the generation of hydrogen by water splitting, monitored by the reduction of 4-nitroaniline to benzene-1,4-diamine (> 80±4% at 20 min; 100% at 24 min), much faster and efficient as compared when reference CdS•PI-b-PAA was used as photocatalyst (< 30±3% at 20 min; 100% at 240 min). Moreover, Rhodamine B was photocatalytically degraded by CdS•PI-b-PAA/graphene, with fast kinetics under visible light illumination in the presence of air. The enhancement of both photocatalytic processes by CdS•PI-b-PAA/graphene was rationalized in terms of effective separation of holes–electrons, contrary to reference CdS•PI-b-PAA, in which rapid recombination of the hole–electron pair is inevitable due to the absence of exfoliated graphene as suitable electron acceptor

Assessment of block and random copolymer overlayers on polymer optical fibers towards protein detection through electrostatic interaction

A simple fiber optic based scheme for the selective detection of proteins, based on surface electrostatic interactions, is presented. The implementation of this method is conducted by using a modified polymer optical fiber's (POF) surface and thin overlayers of properly designed sensitive copolymer materials with predesigned molecular characteristics. Block poly(styrene-b-2vinylpyridine) (PS-b-P2VP) and random poly(styrene-r-2vinylpyridine) (PS-r-P2VP) copolymers of the same monomers and similar molecular weights, were modified and used as sensing materials. This configuration proved to be efficient concerning the fast detection of charged proteins, and also the efficient discrimination of differently charged proteins such as lysozyme (LYS) and bovine serum albumin (BSA). Results on the sensing performance of block and random copolymers are also discussed drawing conclusion on their efficiency given their considerable different fabrication cost

Protein detection by polymer optical fibers sensitized with overlayers of block or random copolymers

In this study a low cost and low complexity optical detection method of proteins is presented by employing a detection scheme based on electrostatic interactions, and implemented by sensitization of a polymer optical fiber (POF) surface by thin overlayer of properly designed sensitive copolymer materials with predesigned charges. This method enables the fast detection of proteins having opposite charge to the overlayer, and also the effective discrimination of differently charged proteins like lysozyme (LYS) and bovine serum albumin (BSA). More specifically, as sensitive materials here was used the block and the random copolymers of the same monomers, namely the block copolymer poly(styrene-b-2vinylpyridine) (PS-b-P2VP) and the corresponding random polymer poly(styrene-r-2-vinylpyridine) (PS-r-P2VP), of similar composition and roughly similar molecular weight. Moreover, this work focused on the comparison of the aforementioned sensitive materials regarding the way in which they can adapt on sensing optical platforms and constitute functional sensing bio-materials

Non-Ionic Surfactant Effects on Innate Pluronic 188 Behavior: Interactions, and Physicochemical and Biocompatibility Studies

The aim of this research was to prepare novel block copolymer-surfactant hybrid nanosystems using the triblock copolymer Pluronic 188, along with surfactants of different hydrophilic to lipophilic balance (HLB ratio—which indicates the degree to which a surfactant is hydrophilic or hydrophobic) and thermotropic behavior. The surfactants used were of non-ionic nature, of which Tween 80® and Brij 58® were more hydrophilic, while Span 40® and Span 60® were more hydrophobic. Each surfactant has unique innate thermal properties and an affinity towards Pluronic 188. The nanosystems were formulated through mixing the pluronic with the surfactants at three different ratios, namely 90:10, 80:20, and 50:50, using the thin-film hydration technique and keeping the pluronic concentration constant. The physicochemical characteristics of the prepared nanosystems were evaluated using various light scattering techniques, while their thermotropic behavior was characterized via microDSC and high-resolution ultrasound spectroscopy. Microenvironmental parameters were attained through the use of fluorescence spectroscopy, while the cytotoxicity of the nanocarriers was studied in vitro. The results indicate that the combination of Pluronic 188 with the above surfactants was able to produce hybrid homogeneous nanoparticle populations of adequately small diameters. The different surfactants had a clear effect on physicochemical parameters such as the size, hydrodynamic diameter, and polydispersity index of the final formulation. The mixing of surfactants with the pluronic clearly changed its thermotropic behavior and thermal transition temperature (Tm) and highlighted the specific interactions that occurred between the different materials, as well as the effect of increasing the surfactant concentration on inherent polymer characteristics and behavior. The formulated nanosystems were found to be mostly of minimal toxicity. The obtained results demonstrate that the thin-film hydration method can be used for the formulation of pluronic-surfactant hybrid nanoparticles, which in turn exhibit favorable characteristics in terms of their possible use in drug delivery applications. This investigation can be used as a road map for the selection of an appropriate nanosystem as a novel vehicle for drug delivery

Fabricating Polymer/Surfactant/Cyclodextrin Hybrid Particles for Possible Nose-to-Brain Delivery of Ropinirole Hydrochloride: In Vitro and Ex Vivo Evaluation

Ropinirole is a non-ergolinic dopamine agonist used to manage Parkinson’s disease and it is characterized by poor oral bioavailability. This study aimed to design and develop advanced drug delivery systems composed of poloxamer 407, a non-ionic surfactant (Tween 80), and cyclodextrins (methyl-β-CD or hydroxy-propyl-β-CD) for possible brain targeting of ropinirole after nasal administration for the treatment of Parkinson’s disease. The hybrid systems were formed by the thin-film hydration method, followed by an extensive physicochemical and morphological characterization. The in vitro cytotoxicity of the systems on HEK293 cell lines was also tested. In vitro release and ex vivo mucosal permeation of ropinirole were assessed using Franz cells at 34 °C and with phosphate buffer solution at pH 5.6 in the donor compartment, simulating the conditions of the nasal cavity. The results indicated that the diffusion-controlled drug release exhibited a progressive increase throughout the experiment, while a proof-of-concept experiment on ex vivo permeation through rabbit nasal mucosa revealed a better performance of the prepared hybrid systems in comparison to ropinirole solution. The encouraging results in drug release and mucosal permeation indicate that these hybrid systems can serve as attractive platforms for effective and targeted nose-to-brain delivery of ropinirole with a possible application in Parkinson’s disease. Further ex vivo and in vivo studies to support the results of the present work are ongoing

Nanoparticles of Block Ionomer Complexes from Double Hydrophilic Poly(acrylic acid)-b-poly(ethylene oxide)-b-poly(acrylic acid) Triblock Copolymer and Oppositely Charged Surfactant

The novel water-dispersible nanoparticles from the double hydrophilic poly(acrylic acid)-b-poly(ethylene oxide)-b-poly(acrylic acid) (PAA-b-PEO-b-PAA) triblock copolymer and oppositely charged surfactant dodecyltrimethyl ammonium bromide (DTAB) were prepared by mixing the individual aqueous solutions. The structure of the nanoparticles was investigated as a function of the degree of neutralization (DN) by turbidimetry, dynamic light scattering (DSL),ζ-potential measurement, and atomic force microscope (AFM). The neutralization of the anionic PAA blocks with cationic DTAB accompanied with the hydrophobic interaction of alkyl tails of DTAB led to formation of core–shell nanoparticles with the core of the DTAB neutralized PAA blocks and the shell of the looped PEO blocks. The water-dispersible nanoparticles with negative ζ-potential were obtained over the DN range from 0.4 to 2.0 and their sizes depended on the DN. The looped PEO blocks hindered the further neutralization of the PAA blocks with cationic DTAB, resulting in existence of some negative charged PAA-b-PEO-b-PAA backbones even when DN > 1.0. The spherical and ellipsoidal nature of these nanoparticles was observed with AFM