137 research outputs found
Giant magnetoimpedance in Vitrovac amorphous ribbons over [0.3-400 MHz] frequency range
Giant magneto impedance (GMI) effect for as-cast
Vitrovac amorphous ribbons
(Vacuumschmelze, Germany) in two configurations (parallel and normal to the
ribbon axis) is studied over the frequency range [0.3-400 MHz] and under static
magnetic fields -160 Oe +160 Oe. A variety of peak features and
GMI ratio values, falling within a small field range, are observed and
discussed.Comment: Paper submitted to International Conference on Magnetism 2003 (ICM
Rome 2003
Characterization of the magnetic interactions of multiphase magnetocaloric materials using first-order reversal curve analysis
In order to understand the magnetocaloric response of materials, it is important to analyze the interactions between the different phases present in them. Recent models have analyzed the influence of these interactions on the magnetocaloric response of composites, providing an estimate value of the interaction field that is consistent with experimental results. This paper analyzes to which extent magnetization first-order reversal curve (FORC) method can be used to calculate these interactions. It is shown that the different field ranges that are explored using these techniques (inside the hysteretic region for FORC; close to magnetic saturation for magnetocaloric effect) produce interaction field values that differ in order of magnitude, with FORC being sensitive to the lower values of the interaction field and magnetocaloric analysis accounting for the larger interactions
Produção de carboximetilcelulase e poligalacturonase sólido pelo fungo Trichoderma polysporum por fermentação em estado sólido, utilizando bagaço de laranja com substrato.
Isolamento de fungos visando à produção de enzimas celulolíticas para aplicação na hidrólise da biomassa.
Design of super-paramagnetic bilayer films based on chitosan and sodium alginate
Bilayer films that combine chitosan and alginate, two natural polysaccharides, and magnetic iron oxide nanoparticles (MNPs) were obtained. Physical and microscopic observations revealed that chitosan and alginate interact strongly through their surfaces, which is attributed to the formation of a polyelectrolyte complex at the interface. The diameter of the individual MNPs was about 10 nm, although in the films they appear arranged in clusters with sizes ranging from 23 nm to several times larger that are formed by collapsed individual particles. All bilayers containing MNP behave as super-paramagnetic materials, exhibiting magnetic synergic effects in comparison to single carbohydrate films. Thus, obtained films could find novel and interesting applications as pH responsiveness systems, pad dressings including hyperthermia, adsorption of positive and negative charged pollutants, etc.Fil: Kloster, Gianina Andrea. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Moscoso Londoño, Oscar. Universidad Autónoma de Manizales; Colombia. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Pirota, Kleber R.. Universidade Estadual de Campinas; BrasilFil: Mosiewicki, Mirna Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Marcovich, Norma Esther. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin
Produção e celulases e xilanases por duas linhagens de Trichoderma visando a aplicação na produção de Etanol celulósico.
Microscopic reversal magnetization mechanisms in CoCrPt thin films with perpendicular magnetic anisotropy: Fractal structure versus labyrinth stripe domains
The magnetization reversal of CoCrPt thin films has been examined as a function of thickness using magneto-optical Kerr effect (MOKE) microscopy and first-order reversal curves (FORC) techniques. MOKE images show differentiated magnetization reversal regimes for different film thicknesses: while the magnetic domains in 10-nm-thick CoCrPt film resemble a fractal structure, a labyrinth stripe domain configuration is observed for 20-nm-thick films. Although FORC distributions for both cases show two main features related to irreversible processes (propagation and annihilation fields) separated by a mostly flat region, this method can nonetheless distinguish which magnetization reversal process is active according to the horizontal profile of the first FORC peak, or propagation field. A single-peak FORC profile corresponds to the fractal magnetization reversal, whereas a flat-peak FORC profile corresponds to the labyrinth magnetization reversal
Microscopic reversal magnetization mechanisms in CoCrPt thin films with perpendicular magnetic anisotropy: fractal structure versus labyrinth stripe domains
Sem informaçãoThe magnetization reversal of CoCrPt thin films has been examined as a function of thickness using magneto-optical Kerr effect (MOKE) microscopy and first-order reversal curves (FORC) techniques. MOKE images show differentiated magnetization reversal regimes for different film thicknesses: while the magnetic domains in 10-nm-thick CoCrPt film resemble a fractal structure, a labyrinth stripe domain configuration is observed for 20-nm-thick films. Although FORC distributions for both cases show two main features related to irreversible processes (propagation and annihilation fields) separated by a mostly flat region, this method can nonetheless distinguish which magnetization reversal process is active according to the horizontal profile of the first FORC peak, or propagation field. A single-peak FORC profile corresponds to the fractal magnetization reversal, whereas a flat-peak FORC profile corresponds to the labyrinth magnetization reversal.961815Sem informaçãoSem informaçãoSem informaçãoThis work was supported by Spanish Grants No. AEI FIS2013-45469 and No. AEI FIS2016-76058, and UE FEDER “Una manera de hacer Europa”, the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 734801. D.N. thanks Fundaçao para a Ciência e Tecnologia (Contract No. IF/01191/2013) for financial support
Compact Ag@fe3o4 Core-shell Nanoparticles By Means Of Single-step Thermal Decomposition Reaction.
A temperature pause introduced in a simple single-step thermal decomposition of iron, with the presence of silver seeds formed in the same reaction mixture, gives rise to novel compact heterostructures: brick-like Ag@Fe3O4 core-shell nanoparticles. This novel method is relatively easy to implement, and could contribute to overcome the challenge of obtaining a multifunctional heteroparticle in which a noble metal is surrounded by magnetite. Structural analyses of the samples show 4 nm silver nanoparticles wrapped within compact cubic external structures of Fe oxide, with curious rectangular shape. The magnetic properties indicate a near superparamagnetic like behavior with a weak hysteresis at room temperature. The value of the anisotropy involved makes these particles candidates to potential applications in nanomedicine.4683
The role of Cu length on the magnetic behaviour of Fe/Cu multi-segmented nanowires
CNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOA set of multi-segmented Fe/Cu nanowires were synthesized by a two-step anodization process of aluminum substrates and a pulsed electrodeposition technique using a single bath. While both Fe segment length and diameter were kept constant to (30 +/- 7) and (45 +/- 5) nm, respectively, Cu length was varied between (15 +/- 5) and (120 +/- 10) nm. The influence of the non-magnetic layer thickness variation on the nanowire magnetic properties was investigated through first-order reversal curve (FORC) measurements and micromagnetic simulations. Our analysis confirmed that, in the multi-segmented Fe/Cu nanowires with shorter Cu segments, the dipolar coupling between Fe segments controls the nanowire magnetic behavior, and its performance is like that of a homogenous Fe nanowire array of similar dimensions. On the other hand, multi-segmented Fe/Cu nanowires with larger Cu segments act like a collection of non-interacting magnetic entities (along the nanowire axis), and their global behavior is mainly controlled by the neighbor-to-neighbor nanodisc dipolar interactions.87112CNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULOCNPQ - CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICOFAPESP - FUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO234513/2014-4sem informaçãoAgências de fomento estrangeiras apoiaram essa pesquisa, mais informações acesse artig
- …