Measurement of the inclusive and differential Higgs boson production cross sections in the decay mode to a pair of τ Leptons in pp collisions at sqrt[s]=13 TeV

Measurements of the inclusive and differential fiducial cross sections of the Higgs boson are presented, using the τ lepton decay channel. The differential cross sections are measured as functions of the Higgs boson transverse momentum, jet multiplicity, and transverse momentum of the leading jet in the event, if any. The analysis is performed using proton-proton collision data collected with the CMS detector at the LHC at a center-of-mass energy of 13  TeV and corresponding to an integrated luminosity of 138  fb^{-1}. These are the first differential measurements of the Higgs boson cross section in the final state of two τ leptons. In final states with a large jet multiplicity or with a Lorentz-boosted Higgs boson, these measurements constitute a significant improvement over measurements performed in other final states

Measurements of inclusive and differential Higgs boson production cross sections at √s = 13.6 TeV in the H → γγ decay channel

Data Availability Statement: This article has no associated data or the data will not be deposited. Release and preservation of data used by the CMS Collaboration as the basis for publications is guided by the CMS data preservation, re-use and open access policy.Code Availability Statement: This article has no associated code or the code will not be deposited. The CMS core software is publicly available on GitHub.A preprint version of the article is available at arXiv:2504.17755v2 [hep-ex], https://arxiv.org/abs/2504.17755 . Comments: Replaced with the published version. Added the journal reference and the DOI. All the figures and tables, including additional supplementary figures, can be found at https://cms-results.web.cern.ch/cms-results/public-results/publications/HIG-23-014 (CMS Public Pages). Report number: CMS-HIG-23-014, CERN-EP-2025-067. Journal reference: JHEP 09 (2025) 070.Inclusive and differential cross sections for Higgs boson production in proton-proton collisions at a centre-of-mass energy of 13.6 TeV are measured using data collected with the CMS detector at the LHC in 2022, corresponding to an integrated luminosity of 34.7 fb^-1. Events with the diphoton final state are selected, and the measured inclusive fiducial cross section is σfid = 74 ± 11 (stat) [+5 -4] (syst) fb, in agreement with the standard model prediction of 67.8 ± 3.8 fb. Differential cross sections are measured as functions of several observables: the Higgs boson transverse momentum and rapidity, the number of associated jets, and the transverse momentum of the leading jet in the event. Within the uncertainties, the differential cross sections agree with the standard model predictions.SCOAP3

Reweighting simulated events using machine-learning techniques in the CMS experiment

Data Availability Statement: The manuscript has no associated data CERN for the benefit of the CMS Collaboration. [Author’s comment: Release and preservation of data used by the CMS Collaboration as the basis for publications is guided by the CMS data preservation, re-use and open access policy.]Code Availability Statement: The manuscript has associated code/software in a data repository. [Author’s comment: The CMS core software is publicly available on GitHub (https://github.com/cms-sw/cmssw) policy (https://doi.org/10.7483/OPENDATA.CMS.1BNU.8V1W)].Data analyses in particle physics rely on an accurate simulation of particle collisions and a detailed simulation of detector effects to extract physics knowledge from the recorded data. Event generators together with a geant-based simulation of the detectors are used to produce large samples of simulated events for analysis by the LHC experiments. These simulations come at a high computational cost, where the detector simulation and reconstruction algorithms have the largest CPU demands. This article describes how machine-learning (ML) techniques are used to reweight simulated samples obtained with a given set of parameters to samples with different parameters or samples obtained from entirely different simulation programs. The ML reweighting method avoids the need for simulating the detector response multiple times by incorporating the relevant information in a single sample through event weights. Results are presented for reweighting to model variations and higher-order calculations in simulated top quark pair production at the LHC. This ML-based reweighting is an important element of the future computing model of the CMS experiment and will facilitate precision measurements at the High-Luminosity LHC.Funded by SCOAP3

Higher-order moments of the elliptic flow distribution in PbPb collisions at √sNN = 5.02 TeV

A preprint version of the article is available at arXiv:2311.11370v2 [nucl-ex], https://arxiv.org/abs/2311.11370 . Comments: Replaced with the published version. Added the journal reference and the DOI. All the figures and tables can be found at https://cms-results.web.cern.ch/cms-results/public-results/publications/HIN-21-010 (CMS Public Pages).The hydrodynamic flow-like behavior of charged hadrons in high-energy lead-lead collisions is studied through multiparticle correlations. The elliptic anisotropy values based on different orders of multiparticle cumulants, v2{2k}, are measured up to the tenth order (k = 5) as functions of the collision centrality at a nucleon-nucleon center-of-mass energy of √sNN = 5.02 TeV. The data were recorded by the CMS experiment at the LHC and correspond to an integrated luminosity of 0.607 nb−1. A hierarchy is observed between the coefficients, with v2{2}>v2{4}≳v2{6}≳v2{8}≳v2{10}. Based on these results, centrality-dependent moments for the fluctuation-driven event-by-event v2 distribution are determined, including the skewness, kurtosis and, for the first time, superskewness. Assuming a hydrodynamic expansion of the produced medium, these moments directly probe the initial-state geometry in high-energy nucleus-nucleus collisions.SCOAP3

Search for resonances in events with photon and jet final states in proton-proton collisions at sqrtssqrt{s} = 13 TeV

A preprint version of the article is available at arXiv:2305.07998v2 [hep-ex], https://arxiv.org/abs/2305.07998v2 . Comments: Replaced with the published version. Added the journal reference and the DOI. All the figures and tables can be found at https://cms-results.web.cern.ch/cms-results/public-results/publications/EXO-20-012 (CMS Public Pages). Report number: CMS-EXO-20-012, CERN-EP-2023-064.A search for resonances in events with the γ+jet final state has been performed using proton-proton collision data collected at √s = 13 TeV by the CMS experiment at the LHC. The total data analyzed correspond to an integrated luminosity of 138 fb−1. Models of excited quarks and quantum black holes are considered. Using a wide-jet reconstruction for the candidate jet, the γ+jet invariant mass spectrum measured in data is examined for the presence of resonances over the standard model continuum background. The background is estimated by fitting the mass distribution with a functional form. The data exhibit no statistically significant deviations from the expected standard model background. Exclusion limits at 95% confidence level on the resonance mass and other parameters are set. Excited light-flavor quarks (excited bottom quarks) are excluded up to a mass of 6.0 (3.8) TeV. Quantum black hole production is excluded for masses up to 7.5 (5.2) TeV in the Arkani-Hamed-Dimopoulos-Dvali (Randall-Sundrum) model. These lower mass bounds are the most stringent to date among those obtained in the γ+jet final state.SCOAP3

Search for a heavy resonance decaying into a top quark and a W boson in the lepton+jets final state at √ s = 13 TeV

A preprint version of the article is available at arXiv 2111.10216: https://arxiv.org/abs/2111.10216.Copyright © CERN, for the benefit of the CMS Collaboration 2022. A search for a heavy resonance decaying into a top quark and a W boson in proton-proton collisions at √s = 13 TeV is presented. The data analyzed were recorded with the CMS detector at the LHC and correspond to an integrated luminosity of 138 fb−1. The top quark is reconstructed as a single jet and the W boson, from its decay into an electron or muon and the corresponding neutrino. A top quark tagging technique based on jet clustering with a variable distance parameter and simultaneous jet grooming is used to identify jets from the collimated top quark decay. The results are interpreted in the context of two benchmark models, where the heavy resonance is either an excited bottom quark b∗ or a vector-like quark B. A statistical combination with an earlier search by the CMS Collaboration in the all-hadronic final state is performed to place upper cross section limits on these two models. The new analysis extends the lower range of resonance mass probed from 1.4 down to 0.7 TeV. For left-handed, right-handed, and vector-like couplings, b∗ masses up to 3.0, 3.0, and 3.2 TeV are excluded at 95% confidence level, respectively. The observed upper limits represent the most stringent constraints on the b∗ model to date.SCOAP3

CMS pythia 8 colour reconnection tunes based on underlying-event data

A preprint version of the article is available at arXiv (https://arxiv.org/abs/2205.02905).Copyright © CERN for the benefit of the CMS collaboration 2023. New sets of parameter tunes for two of the colour reconnection models, quantum chromodynamics-inspired and gluon-move, implemented in the PYTHIA 8 event generator, are obtained based on the default CMS PYTHIA 8 underlying-event tune, CP5. Measurements sensitive to the underlying event performed by the CMS experiment at centre-of-mass energies s√=7 and 13TeV , and by the CDF experiment at 1.96TeV are used to constrain the parameters of colour reconnection models and multiple-parton interactions simultaneously. The new colour reconnection tunes are compared with various measurements at 1.96, 7, 8, and 13TeV including measurements of the underlying-event, strange-particle multiplicities, jet substructure observables, jet shapes, and colour flow in top quark pair (tt¯) events. The new tunes are also used to estimate the uncertainty related to colour reconnection modelling in the top quark mass measurement using the decay products of tt¯ events in the semileptonic channel at 13TeV.SCOAP3

Measurements of Higgs boson production in the decay channel with a pair of ττ leptons in proton-proton collisions at s\sqrt{s} = 13 TeV

A preprint version of the article is available at arXiv:2204.12957v2 [hep-ex], https://arxiv.org/abs/2204.12957v2 . Comments: Replaced with the published version. Added the journal reference and the DOI. All the figures and tables, including additional supplementary figures and tables, can be found at https://cms-results.web.cern.ch/cms-results/public-results/publications/HIG-19-010 (CMS Public Pages). Report number: CMS-HIG-19-010, CERN-EP-2022-027.Measurements of Higgs boson production, where the Higgs boson decays into a pair of τ leptons, are presented, using a sample of proton-proton collisions collected with the CMS experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb^{−1}. Three analyses are presented. Two are targeting Higgs boson production via gluon fusion and vector boson fusion: a neural network based analysis and an analysis based on an event categorization optimized on the ratio of signal over background events. These are complemented by an analysis targeting vector boson associated Higgs boson production. Results are presented in the form of signal strengths relative to the standard model predictions and products of cross sections and branching fraction to τ leptons, in up to 16 different kinematic regions. For the simultaneous measurements of the neural network based analysis and the analysis targeting vector boson associated Higgs boson production signal strengths are found to be 0.82 ± 0.11 for inclusive Higgs boson production, 0.67 ± 0.19 (0.81 ± 0.17) for the production mainly via gluon fusion (vector boson fusion), and 1.79 ± 0.45 for vector boson associated Higgs boson production.SCOAP3