1,633 research outputs found
Thermal performance of high voltage power cables
The UK high voltage electricity transmission network continues to face annual rises in demand, with ever greater volumes of power supplied to load centres throughout the country. To operate this network effectively, it is vital to accurately calculate the maximum allowable electric current which can be safely carried by each component in the power system. In high voltage power cables, this limit is defined by the maximum operating temperature of the cable insulation. Specify this current rating to be too low and the cable asset will never be used to its full potential; conversely setting the rating to be too high risks damage to the asset as the excessive heating can cause premature failure. Thus the rating calculation must be optimised to maintain security of supply by minimising the risk of cable failure, while also maximising the returns from capital investment on the power network. This project has employed a variety of mathematical techniques to improve the methods by which current ratings are calculated. Modern computational techniques such as finite element analysis (e.g Figure 1) and computational fluid dynamics are used to create more advanced circuit rating techniques. These have been compared and refined with input gained from field data. By eliminating simplifications from existing methods, it has been possible to identify ways of increasing the utilisation of the existing network. In addition the new techniques allow examination of the potential benefits of future developments in cable technology. Benefits are being derived from this work on both a day to day and strategic planning levels. For instance, by re-evaluating the current rating method for cables installed in tunnels, it has proved possible to consider the benefits from co-locating more cables in one tunnel to best use these expensive assets. The application of this method has allowed the quantification of the benefits which might be available from next generation cable technologies, enabling the prioritisation of future research effort in cable materials. Upon completion, the knowledge gained from this work is to be used to revise the international standard on calculating current ratings in cable tunnels. Techniques such as these underpin the concept of smart grids with improved operational flexibility and capability. Simultaneously the requirement to build expensive new components into the network is limited, whilst still meeting the need to supply ever increasing volumes of power across the country
Biodiversity management: application of biodiversity data to inform conservation and industry practice
This submission presents a small selection of my publications on a theme – the application of biodiversity data to inform both conservation and industry practice. The published work presented here demonstrates my ability to generate new biodiversity data, to interpret how to apply those data to improve conservation outcomes, and to apply the same biodiversity data in different ways to reduce industry impacts. The core biodiversity data I use are related to species’ distributions and conservation status, as direct indicators of their irreplaceability and vulnerability.
This thesis comprises five peer-reviewed journal papers and a double-blind peer-reviewed published report. Several of these are well-cited: the submitted publications have cumulatively received in excess of 500 citations.
My submitted publications have extended understanding in my area of specialisation, and had clear impact on scientific and professional practice. This is demonstrated not only by incorporation of these publications’ findings into conservation action and policy, but also by the professional advice that I am regularly sought to give as a recognised authority in my field to leading global companies, financial institutions, conservation donors and non-governmental organisations.
My submitted work is the result of collaborations with leaders in my field. It includes the generation of new knowledge that has directly informed applied conservation of highly
iii
threatened species in Asia. It contains substantial scientific advances, such as an innovative approach I developed to resolve the long-standing and intractable problem of ‘limits to biodiversity offsets’. In some cases, it has had a clear practical impact on conservation – by guiding substantial donor funding towards, and even greater development investment away from, species and sites of highest global significance to conservation. In other cases, it has demonstrated influence on policy at a global level – such as shaping the International Union for Conservation of Nature’s policy on biodiversity offsets
Trends and characteristics of accidental and intentional codeine overdose deaths in Australia
Examines trends in codeine-related mortality rates in Australia, and the clinical and toxicological characteristics of codeine-related deaths.
Abstract
Objectives: To examine trends in codeine-related mortality rates in Australia, and the clinical and toxicological characteristics of codeine-related deaths.
Design and setting: Analysis of prospectively collected data from the National Coronial Information System on deaths where codeine toxicity was determined to be an underlying or contributory cause of death. The study period was 2000–2013.
Main outcome measures: Population-adjusted numbers (per million persons) of (1) codeine-related deaths, classified by intent (accidental or intentional); and (2) heroin- and Schedule 8 opioid-related deaths (as a comparator).
Results: The overall rate of codeine-related deaths increased from 3.5 per million in 2000 to 8.7 per million in 2009. Deaths attributed to accidental overdoses were more common (48.8%) than intentional deaths (34.7%), and their proportion increased during the study period. High rates of prior comorbid mental health (53.6%), substance use (36.1%) and chronic pain (35.8%) problems were recorded for these deaths. For every two Schedule 8 opioid-related deaths in 2009, there was one codeine-related death. Most codeine-related deaths (83.7%) were the result of multiple drug toxicity.
Conclusions: Codeine-related deaths (with and without other drug toxicity) are increasing as the consumption of codeine-based products increases. Educational messages are needed to better inform the public about the potential harms of chronic codeine use, especially in the context of polypharmacy
Laser Spectroscopy Multi-Gas Monitor: Results of Technology Demonstration on ISS
Tunable diode laser spectroscopy (TDLS) is an up and coming trace and major gas monitoring technology with unmatched selectivity, range and stability. The technology demonstration of the 4 gas Multi-Gas Monitor (MGM), reported at the 2014 ICES conference, operated continuously on the International Space Station (ISS) for nearly a year. The MGM is designed to measure oxygen, carbon dioxide, ammonia and water vapor in ambient cabin air in a low power, relatively compact device. While on board, the MGM experienced a number of challenges, unplanned and planned, including a test of the ammonia channel using a commercial medical ammonia inhalant. Data from the unit was downlinked once per week and compared with other analytical resources on board, notably the Major Constituent Analyzer (MCA), a magnetic sector mass spectrometer. MGM spent the majority of the time installed in the Nanoracks Frame 2 payload facility in front breathing mode (sampling the ambient environment of the Japanese Experiment Module), but was also used to analyze recirculated rack air. The capability of the MGM to be operated in portable mode (via internal rechargeable lithium ion polymer batteries or by plugging into any Express Rack 28VDC connector) was a part of the usability demonstration. Results to date show unprecedented stability and accuracy of the MGM vs. the MCA for oxygen and carbon dioxide. The ammonia challenge (approx. 75 ppm) was successful as well, showing very rapid response time in both directions. Work on an expansion of capability in a next generation MGM has just begun. Combustion products and hydrazine are being added to the measurable target analytes. An 8 to 10 gas monitor (aka Gas Tricorder 1.0) is envisioned for use on ISS, Orion and Exploration missions
Transformer Oil Passivation and Impact of Corrosive Sulphur
In recent years a significant volume of research has been undertaken in order to understand the recent failures in oil insulated power apparatus due to deposition of copper sulphide on the conductors and in the insulation paper. Dibenzyl Disulfide (DBDS) has been found to be the leading corrosive sulphur compound in the insulation oil [1]. The process of copper sulphide formation and the deposition in the paper is still being investigated, but a recently proposed method seems to be gaining some confidence [1]. This method suggests a two-step process; initially the DBDS and some oil soluble copper complexes are formed. Secondly the copper complexes are absorbed in the paper insulation, where they then decompose into copper sulphide [2]. The most commonly used mitigating technique for corrosive sulphur contaminated oil is passivation, normally using Irgamet 39 or 1, 2, 3-benzotriazole (BTA). The passivator is diluted into the oil to a concentration of around 100ppm, where it then reacts with the copper conductors to form a complex layer around the copper, preventing it from interacting with DBDS compounds and forming copper sulphide. This research project will investigate the electrical properties of HV transformers which have tested positive for corrosive sulphur, and the evolution of those properties as the asset degrades due to sulphur corrosion. Parallel to this the long term properties of transformers with passivated insulation oil will be analysed in order to understand the passivator stability and whether it is necessary to keep adding the passivator to sustain its performance. Condition monitoring techniques under investigation will include dielectric spectroscopy, frequency response analysis, recovery voltage method (aka interfacial polarisation) amongst others. Partial discharge techniques will not be investigated, as the voltage between the coil plates is low and therefore it will not contribute significantly to the overall insulation breakdown, in corrosive oil related faults [3]. The goal of this research is to establish key electrical properties in both passivated and non-passivated power transformers that demonstrate detectable changes as the equipment degrades due to the insulation oil being corrosive
Portable Multigas Monitors for International Space Station
The Environmental Health System (EHS) on International Space Station (ISS) includes portable instruments to measure various cabin gases that acutely impact crew health. These hand-held devices measure oxygen, carbon dioxide, carbon monoxide, hydrogen chloride and hydrogen cyanide. The oxygen and carbon dioxide units also serve to back up key functions of the Major Constituent Analyzers. Wherever possible, commercial off-the-shelf (COTS) devices are employed by EHS to save development and sustaining costs. COTS hardware designed for general terrestrial applications however has limitations such as no pressure compensation, limited life of the active sensor, calibration drift, battery issues, unpredictable vendor support and obsolescence. The EHS fleet (inflight and ground inventory) of instruments is both aging and dwindling in number. With the retirement of the US Space Shuttle, maintenance of on-orbit equipment becomes all the more difficult. A project is underway to search for gas monitoring technology that is highly reliable and stable for years. Tunable Diode Laser Spectroscopy (TDLS) seems to be the front-runner technology, but generally is not yet commercially available in portable form. NASA has fostered the development of TDLS through the Small Business Innovative Research (SBIR) program. A number of gases of interest to the aerospace and submarine communities can be addressed by TDLS including the list mentioned above plus hydrogen fluoride, ammonia and water (humidity). There are several different forms of TDLS including photoacoustic and direct absorption spectroscopy using various multipass cell geometries. This paper describes the history of portable gas monitoring on NASA spacecraft and provides a status of the development of TDLS based instruments. Planned TDLS flight experiments on ISS could lead both to operational use on ISS and important roles in future Exploration spacecraft and habitats
Genetic algorithms for optimal reactive power compensation planning on the national grid system
The phonon theory of liquid thermodynamics
Heat capacity of matter is considered to be its most important property
because it holds information about system's degrees of freedom as well as the
regime in which the system operates, classical or quantum. Heat capacity is
well understood in gases and solids but not in the third state of matter,
liquids, and is not discussed in physics textbooks as a result. The perceived
difficulty is that interactions in a liquid are both strong and
system-specific, implying that the energy strongly depends on the liquid type
and that, therefore, liquid energy can not be calculated in general form. Here,
we develop a phonon theory of liquids where this problem is avoided. The theory
covers both classical and quantum regimes. We demonstrate good agreement of
calculated and experimental heat capacity of 21 liquids, including noble,
metallic, molecular and hydrogen-bonded network liquids in a wide range of
temperature and pressure.Comment: 7 pages, 4 figure
Dynamical Belyi maps
We study the dynamical properties of a large class of rational maps with
exactly three ramification points. By constructing families of such maps, we
obtain infinitely many conservative maps of degree ; this answers a question
of Silverman. Rather precise results on the reduction of these maps yield
strong information on the rational dynamics.Comment: 21 page
- …