How Safe is Your Drinking Water?

Water is a basic ingredient of life and a safe water supply is essential for our good health. Adequate supplies of clean drinking water, whether it comes from a well or from a municipal treatment plant should be everyone\u27s concern. The recent drought conditions have forced many people to realize how critical adequate and safe water supplies really are to the well-being of their families and communities

Safety Precautions with Liquid Manure Storage Systems: Warning--Manure Gases Can Be Dangerous

A liquid manure system produces 4 gases which are potentially hazardous to workers and animals. The decomposing manure slowly releases these gases into the liquid and the surrounding atmosphere. During agitation of the manure large quantities of gas are released into the air. Tragic human deaths and animal losses have occurred during agitation or from humans entering the pit areas

Kerosene Heaters

Many families are buying supplemental space heating units in an attempt to use heat only where it is needed and thus lower the total heating bill. lf you turn down your central heat thermostat and place such a unit in a room where the family spends most of their waking hours, heating bills may be reduced. Such savings appear to be significant, but each family first needs to carefully consider the safety risks and their energy savings potential as well as the lifestyle changes that might be necessary

Proposed Design Modifications to Reduce Risk of Operating Rotary Field Mowers

The primary objective of this project was to reduce risk of injury associated with operating a rotary mower driven by a tractor power take-off (PTO) by developing and evaluating design improvements and determining their economic feasibility. Researchers have concluded that alteration of machinery design has a greater impact on the reduction of accidents than safety training. Implementation of an Operator Presence Sensing System (OPSS) and removal of the PTO are the two injury-reducing, engineering modifications evaluated by this research. Hydraulic power allows this to occur by providing dynamic braking, few moving parts (removal of the PTO), and controllable power. A hydraulic circuit was developed to power the mower and to enable an OPSS. Tractor hydraulics were simulated using a hydraulic training bench. Two mower configurations were tested: 6.55 cm3 rev-1 (0.4 in.3 rev -1) displacement motor with a 0.748 kg blade and 47.5 cm3 rev -1 (2.9 in.3 rev -1) displacement motor with a 9.4 kg blade. A PTO-driven rotary mower was not used to test the circuit due to spatial and safety limitations of the hydraulic training bench. Results from the first mower configuration verified the concepts behind the hydraulic circuit. The second configuration verified the OPSS and indicated the applicability of the circuit to a rotary mower

Wood Burning and Creosote Buildup

For many years,wood was the prime source of heating the house and continues to be so in some parts of the world. In this country, we are beginning to see many individuals returning to wood burning--using it as an alternate heat source and even occasionally as a primary heat source. Heating with wood, however, is not for everyone. It is not as simple as heating with gas, oil or electricity. It is not as convenient to use because it requires a considerable amount of labor, a large storage area for the wood, more cleaning of the home, many more safety precautions, and acceptance of fluctuating room temperatures. With the development of efficient wood stoves and furnaces, creosote buildup in the chimney became more of a problem because the flue gas temperatures were lower due to more of the heat being put in the room rather than going up the chimney. Creosote clings firmly to the pipe and chimney walls, causing buildup of a very flammable material. When creosote deposits catch fire, the heat is very intense and can result in roof and house fires. Even if the burning creosote does not cause a fire from flying sparks or cracks in the chimney, it tends to weaken the chimney masonry or warp metal chimneys

Gene editing restores dystrophin expression in a canine model of Duchenne muscular dystrophy

Mutations in the gene encoding dystrophin, a protein that maintains muscle integrity and function, cause Duchenne muscular dystrophy (DMD). The deltaE50-MD dog model of DMD harbors a mutation corresponding to a mutational “hotspot” in the human DMD gene. We used adeno-associated viruses to deliver CRISPR gene editing components to four dogs and examined dystrophin protein expression 6 weeks after intramuscular delivery (n = 2) or 8 weeks after systemic delivery (n = 2). After systemic delivery in skeletal muscle, dystrophin was restored to levels ranging from 3 to 90% of normal, depending on muscle type. In cardiac muscle, dystrophin levels in the dog receiving the highest dose reached 92% of normal. The treated dogs also showed improved muscle histology. These large-animal data support the concept that, with further development, gene editing approaches may prove clinically useful for the treatment of DMD

Terrestrial Alteration Mineral Assemblages in the NWA 10416 Olivine Phyric Shergottite

We report on the alteration history of the olivine-phyric, highly depleted (HD) shergottite, Northwest Africa (NWA) 10416, paying particular attention to the origin of the aqueous alteration seen affecting the meteorite’s olivine megacrysts. The rock’s interior displays 1 mm, zoned, altered olivine megacrysts set in a groundmass of clinopyroxene, unzoned olivine, and interstitial plagioclase and maskelynite. Synchrotron micro X-ray diffraction (µ-XRD) and transmission electron microscopy (TEM) show that plagioclase and maskelynite have been partially replaced by kaolinite. The relict olivine megacryst cores display a unique concentric colouration for Martian meteorites, having central amber-coloured zones surrounded by a brown mantle zone, with the rims remaining clear and unaltered. This colouration is a result of fluid alteration and partial replacement, with hydration. TEM analysis revealed the ∼200 nm scale banded and largely amorphous nature of the alteration, but with some (∼ 20%) relict crystalline olivine patches. Although the coloured olivine zones show cation and anion site vacancies compared to stoichiometric olivine, a relict igneous compositional trend is preserved in the megacrysts, from Mg-rich altered cores (Mg# = 76) to unaltered stoichiometric rims (Fo53). Synchrotron Fe-K X-ray absorption near-edge structure (XANES) analysis revealed that the coloured zones of the megacryst have different Fe oxidation values. High ferric contents are present in the brown mantle zones (Fe3+/ΣFe ≤ 0.92) and the amber zones (Fe3+/ΣFe ≤ 0.30), whereas the clear rims are ferrous. This suggests alteration occurred in an oxidising environment and that the sharp contrast in colour of the megacryst (brown to clear) is a record of a relict fluid reaction front. In order to test the terrestrial or extraterrestrial origin of the alteration, olivine material from a shock-melt vein was analysed by TEM. The analysis revealed 0.952 nm curved d-spacing’s from clay alteration undisturbed by any shock effects, strongly suggesting a terrestrial origin. The d-spacing values most likely represent a collapsed saponite or vermiculite, showing that in some places olivine has been replaced by crystalline clay. Oxygen isotope analysis of bulk (Δ17O = 0.309 ± 0.009 (2σ) ‰) and amber-coloured megacryst material (= 0.271 ± 0.002 (2σ) ‰), are also consistent with terrestrial alteration. We propose a model in which, during the meteorite’s time in Northwest Africa, low-temperature, likely acidic, groundwater exploited fractures. The fluid altered the olivine megacrysts in a way that was controlled by the pre-existing, igneous compositional zonation, with Mg-rich olivine being more susceptible to alteration in this fluid environment. The plagioclase and maskelynite were also altered to a high degree. After the alteration event it is likely that NWA 10416 had a significant residence time in Northwest Africa, accounting for terrestrial calcite and the dehydration of some clay phases

Functional Electrical Stimulation following nerve injury in a Large Animal Model.

INTRODUCTION: Controversy exists over the effects of functional electrical stimulation (FES) on reinnervation. We hypothesized that intramuscular FES would not delay reinnervation after recurrent laryngeal nerve (RLn) axonotmesis. METHODS: RLn cryo-injury and electrode implantation in ipsilateral posterior cricoarytenoid muscle (PCA) were performed in horses. PCA was stimulated for 20 weeks in eight animals; seven served as controls. Reinnervation was monitored through muscle response to hypercapnia, electrical stimulation and exercise. Ultimately, muscle fiber type proportions and minimum fiber diameters, and RLn axon number and degree of myelination were determined. RESULTS: Laryngeal function returned to normal in both groups within 22 weeks. FES improved muscle strength and geometry, and induced increased type I:II fiber proportion (p=0.038) in the stimulated PCA. FES showed no deleterious effects on reinnervation. DISCUSSION: Intramuscular electrical stimulation did not delay PCA reinnervation after axonotmesis. FES can represent a supportive treatment to promote laryngeal functional recovery after RLn injury. This article is protected by copyright. All rights reserved

Allele Copy Number and Underlying Pathology Are Associated with Subclinical Severity in Equine Type 1 Polysaccharide Storage Myopathy (PSSM1)

Equine type 1 polysaccharide storage myopathy (PSSM1), a common glycogenosis associated with an R309H founder mutation in the glycogen synthase 1 gene (GYS1), shares pathological features with several human myopathies. In common with related human disorders, the pathogenesis remains unclear in particular, the marked phenotypic variability between affected animals. Given that affected animals accumulate glycogen and alpha-crystalline polysaccharide within their muscles, it is possible that physical disruption associated with the presence of this material could exacerbate the phenotype. The aim of this study was to compare the histopathological changes in horses with PSSM1, and specifically, to investigate the hypothesis that the severity of underlying pathology, (e.g. vacuolation and inclusion formation) would (1) be higher in homozygotes than heterozygotes and (2) correlate with clinical severity. Resting and post-exercise plasma creatine kinase (CK) and aspartate aminotransferase (AST) enzyme activity measurements and muscle pathology were assessed in matched cohorts of PSSM1 homozygotes, heterozygotes or control horses. Median (interquartile range (IR)) resting CK activities were 364 (332–764) U/L for homozygotes, 301 (222–377) U/L for heterozygotes and 260 (216–320) U/L for controls, and mean (+/− SD) AST activity for homozygotes were 502 (+/116) U/L, for heterozygotes, 357 (+/−92) U/L and for controls, 311 (+/−64) U/L and were significantly different between groups (P = 0.04 and P = 0.01 respectively). Resting plasma AST activity was significantly associated with the severity of subsarcolemmal vacuolation (rho = 0.816; P = 0.01) and cytoplasmic inclusions (rho = 0.766; P = 0.01). There were fewer type 2× and more type 2a muscle fibres in PSSM1-affected horses. Our results indicate that PSSM1 has incomplete dominance. Furthermore, the association between plasma muscle enzyme activity and severity of underlying pathology suggests that physical disruption of myofibres may contribute to the myopathic phenotype. This work provides insight into PSSM1 pathogenesis and has implications for related human glycogenoses

Towards a first-principles theory of surface thermodynamics and kinetics

Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. To link these processes we combine state-of-the-art microscopic, and macroscopic phenomenological, theories. We apply our theory to the O/Ru(0001) system and calculate thermal desorption spectra, heat of adsorption, and the surface phase diagram. The agreement with experiment provides validity for our approach which thus identifies the way for a predictive simulation of surface thermodynamics and kinetics.Comment: 4 pages including 3 figures. Related publications can be found at http://www.fhi-berlin.mpg.de/th/paper.htm