Micro- and nanoplastic pollution of freshwater and wastewater treatment systems

Plastic waste is a widespread and persistent global challenge with negative impacts on the environment, economy, human health and aesthetics. Plastic pollution has been a focus of environmental research over the past few decades, particularly in relation to macroplastics that are easily visible by the naked eye. More recently, smaller plastic waste at the micro- and nanoscale has become of increasing concern, resulting in extensive investment in research to advance knowledge on the sources, distribution, fate and impact of these materials in aquatic systems. However, owing to their small sizes and a lack of unified methods, adequate quantitative and qualitative assessment has been difficult. Furthermore, most of the microplastic surveys available to date have focussed in the marine environment while scarce knowledge exists of freshwater systems. Because the majority of marine debris originates on land, the role of wastewater treatment systems and natural fluvial vectors in delivering these emerging contaminants to the environment should be explored. Considering fundamental aspects pertaining to microplastic sources, distribution, mobility and degradation in these systems is crucial for developing effective control measures and strategies to mitigate the discharge of these particles to the sea

Nanoparticle transport in saturated porous medium using magnetic resonance imaging

Transport study of nanoparticle (NP) through matrix flow dominated aquifer sand and soils have significant influence in natural systems. To quantify the transport behaviour, magnetic resonance imaging (MRI) was used to image the iron oxide based nanoparticle, Molday ION (carboxyl terminated) through saturated sandstone rock core. T2-weighted images were acquired and the changes in image intensity were calibrated to get a quantitative concentration profiles at various time intervals. These profiles were evaluated through CXTFIT transport model to estimate the transport parameters. These parameters are estimated at various points along the length of the column while classical breakthrough curve analysis cannot provide these details. NP–surface interactions were investigated using DLVO (Derjaguin–Landau–Verwey–Overbeek) theory. The dispersion coefficients (2.55–1.21 × 10−7 m2/s) were found to be decrease with distance, deposition rate constant k (6.70–9.13 × 10−4 (1/s)) and fast deposition rate constant kfast (4.32–8.79 × 10−2 (1/s)) were found to be increase with distance. These parameter variations over length will have a scaling up impact in developing transport models for environmental remediation and risk assessment schemes

Metagenomic sequencing unravels gene fragments with phylogenetic signatures of O2-tolerant NiFe membrane-bound hydrogenases in lacustrine sediment

Many promising hydrogen technologies utilising hydrogenase enzymes have been slowed by the fact that most hydrogenases are extremely sensitive to O2. Within the group 1 membrane-bound NiFe hydrogenase, naturally occurring tolerant enzymes do exist, and O2 tolerance has been largely attributed to changes in iron–sulphur clusters coordinated by different numbers of cysteine residues in the enzyme’s small subunit. Indeed, previous work has provided a robust phylogenetic signature of O2 tolerance [1], which when combined with new sequencing technologies makes bio prospecting in nature a far more viable endeavour. However, making sense of such a vast diversity is still challenging and could be simplified if known species with O2-tolerant enzymes were annotated with information on metabolism and natural environments. Here, we utilised a bioinformatics approach to compare O2-tolerant and sensitive membrane-bound NiFe hydrogenases from 177 bacterial species with fully sequenced genomes for differences in their taxonomy, O2 requirements, and natural environment. Following this, we interrogated a metagenome from lacustrine surface sediment for novel hydrogenases via high-throughput shotgun DNA sequencing using the Illumina™ MiSeq platform. We found 44 new NiFe group 1 membrane-bound hydrogenase sequence fragments, five of which segregated with the tolerant group on the phylogenetic tree of the enzyme’s small subunit, and four with the large subunit, indicating de novo O2-tolerant protein sequences that could help engineer more efficient hydrogenases

Microscopy and elemental analysis characterisation of microplastics in sediment of a freshwater urban river in Scotland, UK

Understanding of the sources, fate, and impact of microplastics (MPs, < 5 mm) remains limited, particularly in freshwater environments, while limited comparability across available surveys hinders adequate monitoring and risk assessment of these contaminants. Here, the distribution of microscopic debris in an urban river close to the marine environment in the West of Scotland was investigated to assess concentration and distribution of primary and secondary MPs. Also, the efficiency of light and scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) was evaluated for characterisation and quantification of MPs sized 2.8 mm–11 μm. Bank sediment samples were collected twice from the River Kelvin in Glasgow and were size-fractionated and processed for extraction of MPs by density separation. Sample MPs spiking and use of procedural blanks allowed the influence of processing on field data quality to be considered. Total abundances were 161–432 MPs kg−1 dry sediment, with fibres as the dominant type, comprising > 88% of total counts. Nevertheless, fibres in blanks suggest potential contributions from atmospheric contamination. Moreover, fibres concentrated mainly in fractions < 0.09 mm suggesting that their fate may be influenced by drivers of fine sediment dynamics in rivers. While no primary MPs were observed, metallic and glass pellets were present in high abundances in settled material and could be easily misidentified by visual inspection, demonstrating that compositional analysis is needed to avoid analytical errors from MP misidentification and overestimation. SEM-EDS allowed for a quick screening of plastic vs non-plastic pellets and improved identification of smaller fragments, whereas more advanced techniques are needed for proper identification of fibres. This study is the first to report on MPs in freshwater rivers in Scotland and suggests that diffuse sources of pollution may be delivering secondary MPs to the river. Their sources, fate, and risk in these systems will thus warrant further attention

Ocean acidification impacts mussel control on biomineralisation

Ocean acidification is altering the oceanic carbonate saturation state and threatening the survival of marine calcifying organisms. Production of their calcium carbonate exoskeletons is dependent not only on the environmental seawater carbonate chemistry but also the ability to produce biominerals through proteins. We present shell growth and structural responses by the economically important marine calcifier Mytilus edulis to ocean acidification scenarios (380, 550, 750, 1000≈ atm pCO 2). After six months of incubation at 750≈ atm pCO 2, reduced carbonic anhydrase protein activity and shell growth occurs in M. edulis. Beyond that, at 1000≈ atm pCO 2, biomineralisation continued but with compensated metabolism of proteins and increased calcite growth. Mussel growth occurs at a cost to the structural integrity of the shell due to structural disorientation of calcite crystals. This loss of structural integrity could impact mussel shell strength and reduce protection from predators and changing environments

Stormwater quality and microbial ecology in an urban rain garden system

Rain gardens are an alternative to traditional drainage, able to lower flood risk and reduce environmental contamination from stormwater. Removal of contaminants by rain gardens is driven by both physical processes (such as filtration and sedimentation) and biological metabolic processes by soil microorganisms. To better understand rain garden performance, this study explored the impact of rain gardens on pollution removal and microbial composition and function using rain gardens fed real stormwater from a busy road. Each rain garden had different grain size and hydraulic conductivities as these parameters have been argued to impact pollution removal. All four rain gardens were able to reduce the contaminant load in the stormwaters, reducing the concentration of dissolved metals, suspended solids and chemical oxygen demand. Significantly, road salting in the winter did not cause dissolved metals to be released from the rain gardens, suggesting that rain gardens can continue to reduce contaminant loads during winter salting regimes. Some variation in pollutant removal was seen between the soils tested, but overall no clear trend could be identified based on grain size and hydraulic conductivity with all rain gardens performing broadly similarly. The rain garden soil altered the microbial community in the stormwater, resulting in greater taxonomic evenness and functional richness in the effluent water compared to the influent. Functional richness of the soils was also higher than that of the input waters, indicating that the microbes in the rain gardens were able to perform a wider range of functions than those of the influent. Effluent and soil microbiology was more impacted by sampling date than soil grain size, which may be a result of the soil communities maturing and changing over time. As greater numbers of rain gardens are installed to tackle flooding from climate change, it is important to ensure the environment is protected from urban contaminants in the stormwater. The results in this study further highlight the ability of rain gardens to undertake this important task

Examination of the ocean as a source for atmospheric microplastics

Global plastic litter pollution has been increasing alongside demand since plastic products gained commercial popularity in the 1930’s. Current plastic pollutant research has generally assumed that once plastics enter the ocean they are there to stay, retained permanently within the ocean currents, biota or sediment until eventual deposition on the sea floor or become washed up onto the beach. In contrast to this, we suggest it appears that some plastic particles could be leaving the sea and entering the atmosphere along with sea salt, bacteria, virus’ and algae. This occurs via the process of bubble burst ejection and wave action, for example from strong wind or sea state turbulence. In this manuscript we review evidence from the existing literature which is relevant to this theory and follow this with a pilot study which analyses microplastics (MP) in sea spray. Here we show first evidence of MP particles, analysed by μRaman, in marine boundary layer air samples on the French Atlantic coast during both onshore (average of 2.9MP/m3) and offshore (average of 9.6MP/m3) winds. Notably, during sampling, the convergence of sea breeze meant our samples were dominated by sea spray, increasing our capacity to sample MPs if they were released from the sea. Our results indicate a potential for MPs to be released from the marine environment into the atmosphere by sea-spray giving a globally extrapolated figure of 136000 ton/yr blowing on shore

Biomineral shell formation under ocean acidification: A shift from order to chaos

Biomineral production in marine organisms employs transient phases of amorphous calcium carbonate (ACC) in the construction of crystalline shells. Increasing seawater pCO2 leads to ocean acidification (OA) with a reduction in oceanic carbonate concentration which could have a negative impact on shell formation and therefore survival. We demonstrate significant changes in the hydrated and dehydrated forms of ACC in the aragonite and calcite layers of Mytilus edulis shells cultured under acidification conditions (1000 μatm pCO2) compared to present day conditions (380 μatm pCO2). In OA conditions, Mytilus edulis has more ACC at crystalisation sites. Here, we use the high-spatial resolution of synchrotron X-ray Photo Emission Electron Microscopy (XPEEM) combined with X-ray Absorption Spectroscopy (XAS) to investigate the influence of OA on the ACC formation in the shells of adult Mytilus edulis. Electron Backscatter Diffraction (EBSD) confirms that OA reduces crystallographic control of shell formation. The results demonstrate that OA induces more ACC formation and less crystallographic control in mussels suggesting that ACC is used as a repair mechanism to combat shell damage under OA. However, the resultant reduced crystallographic control in mussels raises concerns for shell protective function under predation and changing environments. © 2016, Nature Publishing Group. All rights reserved

Reduction of environmental impacts due to using permeable pavements to harvest stormwater

While rainwater harvesting can provide additional water resources, this approach is largely undertaken using water from roofs. More recently, the potential for using stormwater harvested from permeable pavements was recognised as a potential additional water resource. The objective of this study was to estimate the reduction of environmental impacts caused by traditional drainage systems and centralised water utilities if permeable pavement systems were used to harvest stormwater for nonpotable purposes in buildings. The lifecycle environmental impacts and costs associated with the proposed pavements and hydraulic systems were assessed. The city of Glasgow was chosen as a case study. We used the Netuno computer programme to estimate the potential for potable water savings considering the use of stormwater for nonpotable purposes and the SimaPro software to perform a lifecycle assessment (LCA). With the implementation of permeable pavements and stormwater utilisation, great reductions in lifecycle emissions (i.e., CO2-, SO2-, and PM2.5-equivalent emissions) were observed. The proposed system also proved to be economically feasible, i.e., a payback period equal to 16.9 years. The results show the economic and environmental feasibility of permeable pavements when used on a large scale, proving to be an important strategy to reduce water and environmental stresses caused by centralised water utilities and traditional drainage systems

Hydrogeochemistry and water quality index for groundwater sustainability in the Komadugu-Yobe Basin, Sahel Region

The assessment of hydrochemical characteristics and groundwater quality is crucial for environmental sustainability in developing economies. This study employed hydrogeochemical analysis, geospatial analysis, and groundwater quality index to assess hydrogeochemical processes and quality of groundwater in the Komadugu-Yobe basin. The pH, total dissolved solids (TDS), and electrical conductivity (EC) were assessed in situ using a handheld portable electrical conductivity meter. The concentrations of the major cations (Na+, Ca2+, Mg2+, and K+), were analyzed using inductively coupled plasma optical emission spectroscopy (ICP-OES). The major anions (chloride, fluoride, sulfate, and nitrate) were analyzed via ion chromatography (IC). Total alkalinity and bicarbonate were measured in situ using a HACH digital alkalinity kit by the titrimetric method. Hydrochemical results indicate some physicochemical properties of the groundwater samples exceeded the maximum permissible limits as recommended by the World Health Organization guidelines for drinking water. Gibbs diagrams indicate rock–water interaction/rock weathering processes are the dominant mechanisms influencing the groundwater chemistry. Groundwater is predominantly Ca2+-Mg2+-HCO−3 water type, constituting 59% of the groundwater samples analyzed. The groundwater quality index (GWQI) depicted 63 and 27% of the groundwater samples as excellent and good water types for drinking purposes, respectively. This study further relates the interaction between geology, hydrochemical characteristics, and groundwater quality parameters. The results are essential to inform a sustainable management strategy and protection of groundwater resources