Parameter Identification Method for a 3-phase Induction Heating System

This paper describes a new method for the on-line parameter estimation of an induction heating system. Simulations and experiments are presented in order to measure its impedance matrix for more exact control in closed loop. In previous papers, various parameter identification methods including off-line methods were introduced and compared for current inverters. It has been demonstrated that parameter identification is necessary to achieve good control of the inductor currents. A “pseudo-energy” method for a simple and fast implementation is compared to a classical “V/I with phase shift” method. They are experienced on a reduced power 3-phase coupled resonant system supplied with voltage inverters with satisfying results

Factors affecting the creativity of high school students

Creativity is a vital personality quality of each individual. Each person has their potential for creativity, and it can be nurtured and developed in an appropriate and safe environment. The purpose of the study was to find out which factors from schools and students themselves affect creativity as well as the association between creativity and age, gender and giftedness of students, which then a basis to adjust and establish appropriate methods from schools, families, and students themselves to develop elements and their creativity. The study was conducted on 108 high school students in three grades from giftedness and non-giftedness schools. The data was collected through a survey method using a self-constructed questionnaire and drawing creativity test TCT-DP to determine students' creativity levels and personal information. The study's finding, which uses mathematical methods and one-way analysis of variance, reveals that factors affecting elements and creativity level are objective factors including education environment from school; behavior of teachers, and subjective factors including interests, perspectives, and thoughts of students. It was also found that there were no significant differences in the components of creativity and creativity among students in different grades, gender, and groups of giftedness schools

Optimal linear quadratic Gaussian control based frequency regulation with communication delays in power system

In this paper, load frequency regulator based on linear quadratic Gaussian (LQG) is designed for the MAPS with communication delays. The communication delay is considered to denote the small time delay in a local control area of a wide-area power system. The system is modeled in the state space with inclusion of the delay state matrix parameters. Since some state variables are difficult to measure in a real modern multi-area power system, Kalman filter is used to estimate the unmeasured variables. In addition, the controller with the optimal feedback gain reduces the frequency spikes to zero and keeps the system stable. Lyapunov function based on the LMI technique is used to re-assure the asymptotically stability and the convergence of the estimator error. The designed LQG is simulated in a two area connected power network with considerable time delay. The result from the simulations indicates that the controller performed with expectation in terms of damping the frequency fluctuations and area control errors. It also solved the limitation of other controllers which need to measure all the system state variables

Self-injurious Behavior of Children with Autism in Vietnam: Across Sectional Study

This study explored self-injurious behaviour (SIB) of autistic children in Vietnam through a crosssectional design. 60 informants, including 57 parents and 3 caregivers completed the questionnaire on problem behaviour consisting of aggression, self-injury, stereotyping, property destruction, other problem behaviours and their functions. Results revealed that children experienced all mentioned problem behaviours, especially self-injurious behaviour. The topographies of self-injurious behaviour of the children included head-hitting, head-scratching, head-banging, hair-pulling, face-hitting, facepuncturing with a pen, ear-scratching, lip-picking, hand-biting, hand-scratching, hand-pinching, and belly-scratching. The most common area of self-injurious behaviour is the head. The functions of these problem behaviours were expressed in four types (social positive reinforcement, social negative reinforcement, automatic positive reinforcement and automatic negative reinforcement). Social positive reinforcement appeared as a prominent function. Out of these 57 children, 21 of them who were autistic with self-injurious behaviour went through a functional behaviour assessment (FBA) in which the four conditions known as attention, tangible items, escape from task/activities, automatic stimulation were tested. The results of functional behaviour assessment (FBA) further indicated the correspondence between the FAST-R and FBA outcome on function of problem behaviour, especially self-injurious behaviour. The research concluded that the prominent function of these self-injurious behaviours was social function. It means self-injurious behaviours usually occur within a condition of social interaction, especially, in this present study, in the tangible condition. The antecedent of selfinjurious behaviour is the removal of tangibles (e.g. food, preferred items). This paper contributes to our knowledge of self-injurious behaviour of children with autism in Vietnam where empirical research of this field was still very rare

Synthesis of microcrystalline cellulose from banana pseudo-stem for adsorption of organics from aqueous solution

In this study, we proposed and tested a green method for producing microcrystalline cellulose (MCC) with high quality from waste banana pseudo-stem (BPS) after fruit harvesting. The MCC was synthesized by treating BPS with sulfuric acid, sodium hydroxide, and H2O2solution.The produced MCC material was then characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis to explore its properties. The removal of methylene blue (MB) in aqueous solution was conducted by batch adsorption method to evaluate the applicability of MCC for wastewater treatment. The results showed that the adsorption using MCC reached equilibrium after 15 min. The highest MB adsorption capacity of MCC reached 16.6mg/g at pH 6. The adsorption kinetics data were best described by the pseudo second order rate equation. Equilibrium isotherm data of adsorption were well fitted to the linear Langmuir isotherm model. Affecting factors such as adsorbent dosage, initial concentration of MB, and temperature were also investigated. These results suggest a great potential use of MCC for advanced wastewater treatment

PRELIMINARY STUDY ON CHEMICAL MECHANISM OF DECREASE OF TETRODOTOXIN CONTENT IN OVARIES OF A PUFFER FISH Lagocephalus inermis (Temminck and Schlegel, 1850) FERMENTED WITH RICE BRAN

Tetrodotoxins in salted and fermented ovaries with rice bran of a puffer fish Lagocephalus inermis (Temminck Schlegel, 1850) during five months were determined by high-performance liquid chromatography with fluorometric detector (HPLC- FLD). The analysed results showed that the original ovaries contained only tetrodotoxin with content of 7.59 µg/g fresh weight. 4,9-Anhydrotetrodotoxin - an isomer which is less toxic than tetrodotoxin has been found in all ovary samples since the second month. Tetrodotoxin in the ovaries disappeared in the 4th month of the experiment. In addition, 4,9-anhydrotetrodotoxin level in ovaries increased during fermentation. The present study contributes to clarifying the chemical mechanism of decreasing tetrodotoxin content in fermented ovary of puffer fish.Tetrodotoxins in salted and fermented ovaries with rice bran of a puffer fish Lagocephalus inermis (Temminck and Schlegel, 1850) during five months were determined by high-performance liquid chromatography with fluorometric detector (HPLC- FLD). The analysed results showed that the original ovaries contained only Tetrodotoxin with content of 7.59 µg/g fresh weight. 4,9-Anhydrotetrodotoxin- an isomer which is less toxic than Tetrodotoxin has been found in all ovary samples since the second month. Tetrodotoxin in the ovaries disappeared in the 4th month of the experiment. In addition, 4,9-Anhydrotetrodotoxin level in ovaries increased during fermentation. The present study contributes to clarify the chemical mechanism of decreasing Tetrodotoxin content in fermented ovary of puffer fish

MỘT SỐ ĐẶC TÍNH CỦA CANXI HYDROXYAPATIT CHIẾT XUẤT TỪ XƯƠNG CÁ NGỪ VẰN Katsuwonus pelamis

This paper is concerned with certain properties of calcium hydroxyapatite from skipjack tuna bone (Katsuwonus pelamis) which are by-products of fish export industry. Hydroxyapatite Ca10(PO4)6(OH)2 and β-tricalcium phosphate Ca3(PO4)2, the high-value compounds, have been successfully extracted from skipjack tuna bones. The bones were heated at different temperatures of 600oC, 900oC, 1200oC. While at 600oC hydroxyapatites were obtained with Ca/P ratio of 1.658, comparable to the value of 1.67 found in human bone; the hydroxyapatite crystals of average size of 0.25 µm were formed with the same size distribution. In case of heated bone samples at 900°C and 1200°C, the calcium formed were biphasic calcium phosphate composed of hydroxyapatite and β-tricalcium phosphate; the Ca/P ratio was between 1.660–1.665; the calcium crystals of more than 1 µm were highly porous and connected to each other in priority orientation of tube direction.Bài báo này trình bày kết quả nghiên cứu về một số đặc tính của canxi hydroxyapatit chiết xuất từ xương cá ngừ Katsuwonus pelamis, một sản phẩm phụ từ ngành xuất khẩu thịt cá ngừ. Các hợp chất có giá trị là hydroxyapatit Ca10(PO4)6(OH)2 và β-tricanxi phosphat β-TCP Ca3(PO4)2 đã được chiết xuất thành công từ xương cá ngừ vằn. Xương cá ngừ được nung ở các nhiệt độ khác nhau 600, 900 và 1.200oC. Dạng canxi thu được khi nung mẫu ở 600oC là hydroxyapatit với tỉ lệ Ca/P 1,658 gần với tỉ lệ Ca/P 1,67 trong xương người; các tinh thể hydroxyapatit có kích thước trung bình 0,25 µm và sự phân bố kích thước tương đối đồng đều. Đối với mẫu xương được xử lý ở 900 và 1.200oC, canxi thu được là hỗn hợp hai pha hydroxyapatit Ca10(PO4)6(OH)2 và β-tricanxi phosphat Ca3(PO4)2; tỉ lệ Ca/P từ 1,660–1,665, các tinh thể canxi có độ xốp cao và liên kết với nhau theo hướng ưu tiên kiểu hình ống với kích thước lớn hơn 1 µm