ultrasonic vibration turning to increase the deposition efficiency of a silica based sol gel coating

Abstract Magnesium alloys are attracting more and more attention for producing temporary prosthetic devices thanks to their bioresorbable characteristics in human environment. However, they present a reduced corrosion resistance to body fluids, which still limits their applications to a great extent. One possible way to increase the corrosion performances is to coat the device with a suitable coating that provides a barrier to the body fluids corrosion. In this work, Ultrasonic Vibration Turning (UVT) is used to create a surface texture to the AZ31 magnesium alloy with the aim of improving the surface wettability and therefore helping the subsequent coating deposition. The obtained results showed that the surface texture induced by UVT contributed to increase the surface wettability of approximately 17% compared to the conventional turning case, regardless of the adopted cutting parameters. The UVT texture proved to improve the efficiency of the coating deposition since the thickness of the deposited sol-gel coating was increased when applied to UVT surfaces, especially at the lowest depth of cut and highest cutting speed that contributed to generate deeper dimples

large strain extrusion machining of magnesium alloys for biomedical applications

Abstract Recently, magnesium alloys are attracting more and more attention as degradable materials for manufacturing temporary biomedical devices, although their rapid degradation in physiological environment limits their clinical applications to a great extent. Different Severe Plastic Deformation (SPD) processes have been recently applied to magnesium alloys in order to improve the surface integrity, which is directly correlated to their corrosion resistance. The current study investigates the possibility of exploiting Large Strain Extrusion Machining (LSEM) as a processing route to increase corrosion resistance of magnesium alloys for biomedical applications. Different cooling conditions and cutting speeds were adopted during LSEM and their effects on the surface integrity and corrosion resistance on both the machined workpiece and obtained chips were studied. For the first time, liquid nitrogen was used as cooling medium in LSEM and its effect was properly investigated. Results showed that LSEM, regardless of the adopted cutting parameters, is an effective method to obtain a workpiece with improved functional performances. Similar results pertain to the chips, but a careful choice of process parameters is even more mandatory than in the case of the workpiece

the effect of cooling strategies and machining feed rate on the corrosion behavior and wettability of az31 alloy for biomedical applications

Abstract In this work, the corrosion rate of the AZ31 magnesium alloy in physiological environment was improved by optimized machining process parameters. Cryogenic turning was exploited to obtain a featureless layer in the machined sub-surface, while the feed rate was modified to reduce the aspect ratio of the feed marks characteristic of the turning operation, achieving a decrease of the alloy wettability. The obtained results showed that the aforementioned combined aspects acted as an efficient strategy to enhance the AZ31 poor corrosion behavior, which represents the major obstacle of its effective application in the biomedical field

Composição bromatológica e digestibilidade aparente da parte aérea seca da mandioca na alimentação de tilápia-do-nilo.

O objetivo deste trabalho foi avaliar o efeito da secagem da parte aérea da mandioca, ao sol e à sombra, sobre a composição bromatológica e o coeficiente de digestibilidade aparente (CDA) de nutrientes, energia e aminoácidos para tilápia-do-nilo (Oreochromis niloticus). Não houve diferença entre os métodos de secagem para a composição bromatológica. O CDA da proteína bruta apresentou maior digestibilidade para a parte aérea seca à sombra. A secagem da parte aérea da mandioca à sombra permite maior conservação do conteúdo proteico e melhor digestibilidade aparente da fração proteica e aminoacídica para a tilápia-do-nilo

Enhanced high-dispersion coronagraphy with KPIC phase II: design, assembly and status of sub-modules

The Keck Planet Imager and Characterizer (KPIC) is a purpose-built instrument for high-dispersion coronagraphy in the K and L bands on Keck. This instrument will provide the first high resolution (R>30,000) spectra of known directly imaged exoplanets and low-mass brown dwarf companions visible in the northern hemisphere. KPIC is developed in phases. Phase I is currently at Keck in the early operations stage, and the phase II upgrade will deploy in late 2021. The goal of phase II is to maximize the throughput for planet light and minimize the stellar leakage, hence reducing the exposure time needed to acquire spectra with a given signal-to- noise ratio. To achieve this, KPIC phase II exploits several innovative technologies that have not been combined this way before. These include a 1000-element deformable mirror for wavefront correction and speckle control, a set of lossless beam shaping optics to maximize coupling into the fiber, a pupil apodizer to suppress unwanted starlight, a pupil plane vortex mask to enable the acquisition of spectra at and within the diffraction limit, and an atmospheric dispersion compensator. These modules, when combined with the active fiber injection unit present in phase I, will make for a highly efficient exoplanet characterization platform. In this paper, we will present the final design of the optics and opto-mechanics and highlight some innovative solutions we implemented to facilitate all the new capabilities. We will provide an overview of the assembly and laboratory testing of the sub-modules and some of the results. Finally, we will outline the deployment timeline

An electric molecular motor

The computational investigations at California Institute of Technology were supported by National Science Foundation grant no. CBET-2005250 (W.-G.L. and W.A.G.).Macroscopic electric motors continue to have a large impact on almost every aspect of modern society. Consequently, the effort towards developing molecular motors that can be driven by electricity could not be more timely. Here we describe an electric molecular motor based on a [3]catenane , in which two cyclobis(paraquat-p-phenylene) (CBPQT4+) rings are powered by electricity in solution to circumrotate unidirectionally around a 50-membered loop. The constitution of the loop ensures that both rings undergo highly (85%) unidirectional movement under the guidance of a flashing energy ratchet , whereas the interactions between the two rings give rise to a two-dimensional potential energy surface (PES) similar to that shown by F0F1ATP synthase . The unidirectionality is powered by an oscillating voltage or external modulation of the redox potential . Initially, we focused our attention on the homologous [2]catenane, only to find that the kinetic asymmetry was insufficient to support unidirectional movement of the sole ring. Accordingly, we incorporated a second CBPQT4+ ring to provide further symmetry breaking by interactions between the two mobile rings. This demonstration of electrically driven continual circumrotatory motion of two rings around a loop in a [3]catenane is free from the production of waste products and represents an important step towards surface-bound electric molecular motors.Publisher PDFPeer reviewe

Imaging of the Inner Zone of Blast Furnaces Using MuonRadiography: The BLEMAB Project

The aim of the BLEMAB project (BLast furnace stack density Estimation through online Muons ABsorption measurements) is the application of muon radiography techniques, to image a blast furnace’s inner zone. In particular, the goal of the study is to characterize the geometry and size of the so-called “cohesive zone”, i.e., the spatial region where the slowly downward-moving material begins to soften and melt, which plays such an important role in the performance of the blast furnace itself. Thanks to the high penetration power of natural cosmic-ray muon radiation, muon transmission radiography could be an appropriate non invasive methodology for the imaging of large high-density structures such as a blast furnace, whose linear dimensions can be up to a few tens of meters. A state-of-the-art muon tracking system is currently in development and will be installed at a blast furnace on the ArcelorMittal site in Bremen (Germany), where it will collect data for a period of various months. In this paper, the status of the project and the expectations based on preliminary simulations are presented and briefly discussed