Large Magnetoresistance in Co/Ni/Co Ferromagnetic Single Electron Transistors

We report on magnetotransport investigations of nano-scaled ferromagnetic Co/Ni/Co single electron transistors. As a result of reduced size, the devices exhibit single electron transistor characteristics at 4.2K. Magnetotransport measurements carried out at 1.8K reveal tunneling magnetoresistance (TMR) traces with negative coercive fields, which we interpret in terms of a switching mechanism driven by the shape anisotropy of the central wire-like Ni island. A large TMR of about 18% is observed within a finite source-drain bias regime. The TMR decreases rapidly with increasing bias, which we tentatively attribute to excitation of magnons in the central island.Comment: 12 pages (including 4 figures). Accepted for publishing on AP

The Boson peak in supercooled water

We perform extensive molecular dynamics simulations of the TIP4P/2005 model of water to investigate the origin of the Boson peak reported in experiments on supercooled water in nanoconfined pores, and in hydration water around proteins. We find that the onset of the Boson peak in supercooled bulk water coincides with the crossover to a predominantly low-density-like liquid below the Widom line $T_W$. The frequency and onset temperature of the Boson peak in our simulations of bulk water agree well with the results from experiments on nanoconfined water. Our results suggest that the Boson peak in water is not an exclusive effect of confinement. We further find that, similar to other glass-forming liquids, the vibrational modes corresponding to the Boson peak are spatially extended and are related to transverse phonons found in the parent crystal, here ice Ih.Comment: 25 pages, 9 figure

Using web GIS to promote stakeholder understanding of scientific results in sustainable urban development: A case study in Bergen, Norway

This paper highlights the importance of improving stakeholder understanding of environmental factors such as air quality and the urban heat island effect to achieve sustainable development goals. While accurate spatial and temporal environmental data are critical for sustainable solutions, the challenge lies in translating complex environmental information for non-specialists. To solve this problem, we propose using web GIS storytelling as a powerful tool for communicating and disseminating information about the environment. This paper aims to show example of implementation of a web-based geographic information system (GIS) on our case study in Bergen, Norway. This platform “Web GIS Bergen, air quality and thermal comfort” was created as an open portal. This document explains the components of the platform, their rationale, and implementation, which includes important steps. They involve the collection of relevant environmental data, including modeling results and remote sensing data. Futhermore, the design and interface of the platform has been carefully considered to provide a user-friendly experience based on interactive maps and storytelling. Combining data visualization and storytelling, the platform promotes a comprehensive understanding of complex environmental data, including “invisible killers” such as air pollution and the urban heat island effect, which significantly affect sustainable development. The strategic integration of this web-based GIS platform in Bergen can serve as an attractive model for other urban areas looking for practical tools for sustainable development, engaging stakeholders for a healthier and more sustainable urban future

Light-in-flight recording. 5: Theory of slowing down the faster-than-light motion of the light shutter

Light-in-flight recording by holography uses a picosecond pulse for the reference beam, which like a sheet of light intersects the hologram plate and produces a sensitivity area that with a speed faster than light moves over the plate like a light shutter. If, however, the front of the reference pulse by diffraction in a grating is tilted relative to its direction of motion, the velocity of the light shutter can be slowed down resulting in increased recording time. The practical result using a reflection grating was a true recording that corresponded to a time compression of two to one. To minimize distortions of the recorded pulse shape we studied intersections that are identical for apparent (ellipsoidal) and true (spheroidal) wavefronts

Impact of Escherichia coli on Urine Citrate and Urease-Induced Crystallization

Escherichia coli (E. coli) is usually not a urease producer. It is, however, often cultured in urinary phosphate containing calculi including ammonium magnesium phosphate stones. This suggests the possibility that E. coli might be involved in stone forming process. The effect of E. coli on urine citrate and urease-induced crystallization in human urine has been studied in vitro. E. coli was found to strongly reduce urine citrate (after 48 hours). In the E. coli inoculated samples, the urease-induced crystallization was increased. There was a strong correlation, r = 0.8, between the citrate decrease and the increase in calcium precipitation. The results indicate that E. coli and the reduced urine citrate influences urease-induced crystallization in vitro

Severe asphyxia due to delivery-related malpractice in Sweden 1990–2005

Aim The objective of the thesis was to describe the most common causes of substandard care during labour contributing to severe asphyxia or neonatal death, to study risk factors related to asphyxia associated with substandard care and to explore the occurrence of substandard care during labour. Background There are about 100 000 infants born every year in Sweden. Most infants are born healthy after uncomplicated deliveries. However, 20-50 claims for financial compensation are made annually to the Patients Advisory Committee (PA C) on suspicion that substandard care during labour has contributed to severe asphyxia causing cerebral palsy or death. Even if this group of patients is notably small, asphyxia causes life-long impairment and immeasurable suffering to the patients and their families. In addition, the insurance costs are substantial and amount to 25% of all costs related to substandard care in Sweden. With the exception of this group of patients, and claims to the Health Services Disciplinary Board, the frequency of substandard care in relation to childbirth is fairly unknown. Material and methods Inclusion criteria were pregnancies with a gestational length ≥ 33 weeks, a spontaneous or induced start of labour, a normal CTG at admission for labour, and Apgar score < 7 at 5 minutes of age (Papers I-IV). 472 case records of deliveries from 1990-2005, filed at the PAC were scrutinised. In Paper I and II the deliveries and acts of neonatal resuscitation procedures are described. In Paper III, maternal characteristics, factors related to care and infant characteristics for patients receiving lifelong financial compensation from PAC are compared with all infants with full Apgar score at 5 minutes of age born after a vaginal start during the same time period in Sweden (n=1.141 059). In Paper IV deliveries and risk factors from 313 infants with Apgar score < 7at 5 minutes of age, born in the Stockholm County are compared with 313 infants with full Apgar score at five minutes of age, matched for year of birth. Results One-hundred and seventy-seven infants were considered to have been severely asphyxiated due to substandard care during labour (Paper I-III). The most common occurrences of malpractice in conjunction with labour were neglecting to supervise fetal well-being (98%), neglecting signs of fetal asphyxia (71%), including incautious use of oxytocin (71%) and choosing a non-optimal mode of delivery (52%) (Paper I). Resuscitation of the 177 severely asphyxiated infants was unsatisfactory in 47%. The most important flaw was the defective compliance with the guidelines concerning ventilation and prompt paging for skilled personnel in cases of imminent asphyxia (Paper II). Risk factors associated with asphyxia included maternal age ≥ 30 years, short maternal stature (< 159 cm), previous caesarean delivery, insulin-dependent diabetes, induced deliveries and night deliveries, where the increases in risk were doubled to a four-fold. In addition, dystocia of labour was associated with a five-fold increase in risk, which was further increased if epidural anaesthesia or opioids were used. Small- and large-for-gestational age infants, post-term (> 42 weeks) births, twins and breech deliveries had a three to eight-fold increase in risk of asphyxia when there was substandard care during labour (Paper III). Two thirds of infants born in the Stockholm region 2004-2006, with Apgar score < 7 at 5 minutes but also one third of the healthy controls were subjected to some kind of substandard care during labour (Paper IV). The main causes of substandard care during labour were related to misinterpretation of CTG, not acting timely on abnormal CTG, and incautious use of oxytocin. The risk of asphyxia increased with duration of abnormal CTG and was increased fifteen-fold when this was abnormal for ≥ 90 minutes. Oxytocin was provided without sign of inertia in 20% of cases and controls and the risk of asphyxia was increased more than fivefold in cases of tachysystole. Infants born after a spontaneous vaginal delivery with abnormal CTG for more than 45 minutes had a more than sevenfold risk of low Apgar score. In instrumental deliveries that were considered complex, there was a more than seventeen-fold risk of an Apgar score < 7 at 5 minutes of age. Assuming that substandard care is causative for low Apgar score, we estimate that 42% of the cases could be prevented by avoiding substandard care (Paper IV). Conclusion It is possible to improve patient safety during labour by applying educational efforts on fetal surveillance and increasing awareness of risk factors associated with asphyxia. The main causes of substandard care during labour are related to misinterpretation of CTG, not acting timely on abnormal CTG, misinterpretation of guidelines and misuse of oxytocin. Low Apgar score at 5 minutes of age can substantially, be prevented by avoiding substandard care

A Method for Producing Site-Specific TEM Specimens from Low Contrast Materials with Nanometer Precision

A method that enables high precision extraction of transmission electron microscope (TEM) specimens in low contrast materials has been developed. The main idea behind this work is to produce high contrast markers on both sides of and close to the area of interest. The markers are filled during the depositing of the protective layer. The marker material can be of either Pt or C depending on which one gives the highest contrast. It is thereby possible to distinguish the location of the area of interest during focused ion beam (FIB) milling and ensure that the TEM sample is extracted precisely at the desired position. This method is generally applicable and enables FIB/scanning electron microscope users to make high quality TEM specimens from small features and low contrast materials without a need for special holders. We explain the details of this method and illustrate its potential by examples from three different types of materials