36,115 research outputs found
An integral turbulent kinetic energy analysis of free shear flows
Mixing of coaxial streams is analyzed by application of integral techniques. An integrated turbulent kinetic energy (TKE) equation is solved simultaneously with the integral equations for the mean flow. Normalized TKE profile shapes are obtained from incompressible jet and shear layer experiments and are assumed to be applicable to all free turbulent flows. The shear stress at the midpoint of the mixing zone is assumed to be directly proportional to the local TKE, and dissipation is treated with a generalization of the model developed for isotropic turbulence. Although the analysis was developed for ducted flows, constant-pressure flows were approximated with the duct much larger than the jet. The axisymmetric flows under consideration were predicted with reasonable accuracy. Fairly good results were also obtained for the fully developed two-dimensional shear layers, which were computed as thin layers at the boundary of a large circular jet
Apollo experience report: Guidance and control systems - Digital autopilot design development
The development of the Apollo digital autopilots (the primary attitude control systems that were used for all phases of the lunar landing mission) is summarized. This report includes design requirements, design constraints, and design philosophy. The development-process functions and the essential information flow paths are identified. Specific problem areas that existed during the development are included. A discussion is also presented on the benefits inherent in mechanizing attitude-controller logic and dynamic compensation in a digital computer
Investigation and study of a multi-aperture antenna system final report, 1 jan. - 1 apr. 1964
Multiple aperture adaptive antenna system for telemetry reception from remote space vehicle
The Arizona Radio Observatory CO Mapping Survey of Galactic Molecular Clouds: III. The Serpens Cloud in CO J=2-1 and 13CO J=2-1 Emission
We mapped 12CO and 13CO J = 2-1 emission over 1.04 square deg of the Serpens
molecular cloud with 38 arcsec spatial and 0.3 km/s spectral resolution using
the Arizona Radio Observatory Heinrich Hertz Submillimeter telescope. Our maps
resolve kinematic properties for the entire Serpens cloud. We also compare our
velocity moment maps with known positions of Young Stellar Objects (YSOs) and
1.1 mm continuum emission. We find that 12CO is self-absorbed and 13CO is
optically thick in the Serpens core. Outside of the Serpens core, gas appears
in filamentary structures having LSR velocities which are blue-shifted by up to
2 km/s relative to the 8 km/s systemic velocity of the Serpens cloud. We show
that the known Class I, Flat, and Class II YSOs in the Serpens core most likely
formed at the same spatial location and have since drifted apart. The spatial
and velocity structure of the 12CO line ratios implies that a detailed
3-dimensional radiative transfer model of the cloud will be necessary for full
interpretation of our spectral data. The starless cores region of the cloud is
likely to be the next site of star formation in Serpens.Comment: 41 pages, 15 figure
Feasibility study of silicon nitride protection of plastic encapsulated semiconductors
The application of low temperature silicon nitride protective layers on wire bonded integrated circuits mounted on lead frame assemblies is reported. An evaluation of the mechanical and electrical compatibility of both plasma nitride and photochemical silicon nitride (photonitride) passivations (parallel evaluations) of integrated circuits which were then encapsulated in plastic is described. Photonitride passivation is compatible with all wire bonded lead frame assemblies, with or without initial chip passivation. Plasma nitride passivation of lead frame assemblies is possible only if the chip is passivated before lead frame assembly. The survival rate after the environmental test sequence of devices with a coating of plasma nitride on the chip and a coating of either plasma nitride or photonitride over the assembled device is significantly greater than that of devices assembled with no nitride protective coating over either chip or lead frame
Development of a multiplex flow cytometric microsphere immunoassay for mycotoxins and evaluation of its application in feed
A multi-mycotoxin immunoassay—using the MultiAnalyte Profiling (xMAP) technology—is developed and evaluated. This technology combines a unique color-coded microsphere suspension array, with a dedicated flow cytometer. We aimed for the combined detection of aflatoxins, ochratoxin A, deoxynivalenol, fumonisins, zearalenone and T-2-toxin in an inhibition immunoassay format. Sets of six mycotoxin-protein conjugates and six specific monoclonal antibodies were selected, and we observed good sensitivities and no cross-interactions between the assays in buffer. However, detrimental effects of the feed extract on the sensitivities and in some cases on the slopes of the curves were observed and different sample materials showed different effects. Therefore, for quantitative analysis, this assay depends on calibration curves in blank matrix extracts or on the use of a suitable multi-mycotoxin cleanup. To test if the method was suitable for the qualitative detection at EU guidance levels, we fortified rapeseed meal, a feed ingredient, with the six mycotoxins, and all extracts showed inhibited responses in comparison with the non-fortified sample extract. Contaminated FAPAS reference feed samples assigned for a single mycotoxin showed strong inhibitions in the corresponding assays but also often in other assays of the multiplex. In most cases, the presence of these other mycotoxins was confirmed by instrumental analysis. The multiplex immunoassay can be easily extended with other mycotoxins of interest, but finding a suitable multi-mycotoxin cleanup will improve its applicability
The Thermodynamic Activity of Carbon in Liquid Iron: An Experimental Investigation
Abstract Not Provided
Measurement of spray combustion processes
A free jet configuration was chosen for measuring noncombusting spray fields and hydrocarbon-air spray flames in an effort to develop computational models of the dynamic interaction between droplets and the gas phase and to verify and refine numerical models of the entire spray combustion process. The development of a spray combustion facility is described including techniques for laser measurements in spray combustion environments and methods for data acquisition, processing, displaying, and interpretation
- …