An algorithm to generate input data from meteorological and space shuttle observations to validate a CH4-CO model

Objective procedures to analyze data from meteorological and space shuttle observations to validate a three dimensional model were investigated. The transport and chemistry of carbon monoxide and methane in the troposphere were studied. Four aspects were examined: (1) detailed evaluation of the variational calculus procedure, with the equation of continuity as a strong constraint, for adjustment of global tropospheric wind fields; (2) reduction of the National Meteorological Center (NMC) data tapes for data input to the OSTA-1/MAPS Experiment; (3) interpolation of the NMC Data for input to the CH4-CO model; and (4) temporal and spatial interpolation procedures of the CO measurements from the OSTA-1/MAPS Experiment to generate usable contours of the data

Laser gain measurements at 193 nm in a small discharge cell containing ArF excimer laser gas mixtures

Spatial and temporal gain profiles as well as the peak net gain at 193 nm have been measured in X-ray preionized discharges excited by a single pulse electrical system working in the charge transfer mode. Ar- and F2-containing laser gas mixtures with He or Ne as a buffer gas have been used. With a pumping pulse duration of ~ 100 ns (FWHM) and a specific peak power deposition of ~ 1 MW cm-3 bar-1 in a gas mixture containing F2 : Ar : He (0.1%:5%:94.9%), at 2 bar total pressure, a very high peak net gain coefficient of ~30% cm-1 was measured in the gas discharge. The FWHM of the gain waveform was ~ 60 n

Computing Functions of Random Variables via Reproducing Kernel Hilbert Space Representations

We describe a method to perform functional operations on probability distributions of random variables. The method uses reproducing kernel Hilbert space representations of probability distributions, and it is applicable to all operations which can be applied to points drawn from the respective distributions. We refer to our approach as {\em kernel probabilistic programming}. We illustrate it on synthetic data, and show how it can be used for nonparametric structural equation models, with an application to causal inference

Apollo experience report: Guidance and control systems - Digital autopilot design development

The development of the Apollo digital autopilots (the primary attitude control systems that were used for all phases of the lunar landing mission) is summarized. This report includes design requirements, design constraints, and design philosophy. The development-process functions and the essential information flow paths are identified. Specific problem areas that existed during the development are included. A discussion is also presented on the benefits inherent in mechanizing attitude-controller logic and dynamic compensation in a digital computer

Temporal extension of stable glow discharges in fluorine-based excimer laser gas mixtures by the addition of xenon

The effect of addition of xenon on the long term homogeneity of discharges in F2and ArF excimer laser gas mixtures was investigated in a small-volume discharge chamber. The gas mixture in the discharge chamber was preionized by X-rays. A special electrical excitation circuit containing a pulse forming line provided a long, square-shaped current pumping pulse of a predetermined duration to the discharge electrodes. The initiation and the development of the discharge was monitored via its fluorescence signal with an intensified CCD camera. We found that adding Xe up to partial pressures of 0.53 mbar extended the homogeneous phase of the discharge from 80 ns to approximately 200 ns in He/F2as well as in He/Ar/F2and Ne/Ar/F2excimer laser gas mixtures. Monitoring of the ArF and XeF spontaneous emission signals showed that the formation of ArF excimers remained unaffected by the addition of xenon (up to 1.3 mbar) to the laser gas mixture

Precision CW laser automatic tracking system investigated

Precision laser tracker capable of tracking a low acceleration target to an accuracy of about 20 microradians rms is being constructed and tested. This laser tracking has the advantage of discriminating against other optical sources and the capability of simultaneously measuring range

The Arizona Radio Observatory CO Mapping Survey of Galactic Molecular Clouds: III. The Serpens Cloud in CO J=2-1 and 13CO J=2-1 Emission

We mapped 12CO and 13CO J = 2-1 emission over 1.04 square deg of the Serpens molecular cloud with 38 arcsec spatial and 0.3 km/s spectral resolution using the Arizona Radio Observatory Heinrich Hertz Submillimeter telescope. Our maps resolve kinematic properties for the entire Serpens cloud. We also compare our velocity moment maps with known positions of Young Stellar Objects (YSOs) and 1.1 mm continuum emission. We find that 12CO is self-absorbed and 13CO is optically thick in the Serpens core. Outside of the Serpens core, gas appears in filamentary structures having LSR velocities which are blue-shifted by up to 2 km/s relative to the 8 km/s systemic velocity of the Serpens cloud. We show that the known Class I, Flat, and Class II YSOs in the Serpens core most likely formed at the same spatial location and have since drifted apart. The spatial and velocity structure of the 12CO line ratios implies that a detailed 3-dimensional radiative transfer model of the cloud will be necessary for full interpretation of our spectral data. The starless cores region of the cloud is likely to be the next site of star formation in Serpens.Comment: 41 pages, 15 figure

Long-pulse KrCl laser with a high discharge quality \ud

The discharge quality and optimum pump parameters of a long-pulse high-pressure gas discharge excited KrCl laser are investigated. A three-electrode prepulse–mainpulse excitation circuit is employed as pump source. The discharge volume contains a gas mixture of HCl/Kr/Ne operated at a total pressure of up to 5 bar. For a plane–plane resonator, the divergence of both output laser beams is measured. A low beam divergence of less than 1 mrad is measured as a result of the very high discharge homogeneity. A maximum laser pulse duration of 150 ns (FWHM) is achieved for a pump duration of 270 ns (FWHM) and a power density of 340 kW cm-3. Pumping the discharge under optimum conditions employing a stable resonator results in a maximum specific energy of 0.45 J/l with a laser pulse duration of 117 ns and an efficiency of 0.63% based on the deposited energy