Ytterbium- and chromium-doped fibre laser: from chaotic self-pulsing to passive Q-switching

A spontaneously chaotic, self-pulsing ytterbium-doped fibre laser is partially stabilized into the passively Q-switched mode of operation using a chromium-doped saturable absorber fibre. This original all-fibre laser produces sustained and stable trains of smooth pulses at high repetition rate.Comment: 1 page abstract; at 20th International laser physics workshop, Sarajevo : Bosnia And Herzegovina (2011

The anchors of steel wire ropes, testing methods and their results

The present paper introduces an application of the acoustic and thermographic method in the defectoscopic testing of immobile steel wire ropes at the most critical point, the anchor. First measurements and their results by these new defectoscopic methods are shown. In defectoscopic tests at the anchor, the widely used magnetic method gives unreliable results, and therefore presents a problem for steel wire defectoscopy. Application of the two new methods in the steel wire defectoscopy at the anchor point will enable increased safety measures at the anchor of steel wire ropes in bridge, roof, tower and aerial cable lift constructions

Tailoring of the luminescent ions local environment in optical fibers, and applications

The chapter is situated in the fields of fiber materials sciences and technologies (particularly dealing with the fiber glass compositions and luminescent ion doping, and transparent glass ceramic optical fibers), and applications such as fiber lasers and amplifiers. We propose to present a review of research activities on rare-earth (RE) and transition metals (TM) doped silica-based optical fibers, aiming at understanding theier spectral properties, and particularly some of their optical transitions that will allow interesting and alternative applications. Silica, as opposed to alternative, low temperature materials, is chosen for practical and economical reasons. Selected RE and TM ions are studied both as probes of their local environment and for their application potentials. In this chapter, we will focus on erbium (Er) ions for the potential spectral 'tailoring' of its gain curve at 1.55 $\mu$m, thulium (Tm) as local environment probe along both near infrared transitions around 0.8 and 1.47 $\mu$m, and chromium (Cr) for the sensitivity of valency and spectroscopy to the glass composition and its potential as saturable absorber in lasers. We will present some extensive studies on the influence of the local environment on dopants: such as (but not limited to) energy transfer mechanisms between rare-earth ions of same nature (Tm-Tm) or different nature (Yb-Tm), effect of the local phonon energy on Tm ions emission efficiency, broadening of Er ions emission induced by oxide nanoparticles grown in situ during the fabrication process, etc. Knowledge of these effects is essential for photonics applications, and many studies are under progress or are still needed in this field. The potential of some applications which could benefit from the basic studies on materials are also numerically studied : 0.8-$\mu$m thulium-doped fiber laser, so-called S-band (1.47 $\mu$m) thulium-doped amplifier for telecommunications and laser applications, sensitisation of Tm-based devices using ytterbium sensitized ions.Comment: arXiv admin note: substantial text overlap with arXiv:0911.168

Mehanička ispitivanja čeličnih užadi i čeličnih žica

In the article we are dealing with the problems of the steel wires and steel wire ropes testing, which are very often used today, and at the same time some negatives of the standards valid for steel wire rope testing are mentioned. In the article are mentioned also the drawbacks of new European standards which are implemented to the system of Slovak technical standards. From the rope quality assessment point of view the lifting capacity of the rope as a whole is important. In the article is briefly presented new shredder machine, with the maximum shredding force of 2500 kN. The steel wire ropes with 63 mm in diameter and maximum length of 6 m can be tested using this machine.U članku se raspravlja o problematici ispitivanja čeličnih žica i užadi koja se danas vrlo često koriste, a jednovremeno se spominju i negativne karakteristike normi važećih za testiranje čeličnog užeta. U članku su spomenuti i nedostaci novih evropskih standarda koji se uvode u sistem slovačkih tehničkih normi. Sa stajališta procjene kakvoće užeta, važan je kapacitet dizanja u cjelini. U članku je kratko prikazana nova kidalica s maksimalnom snagom kidanja od 2500 kN. Na tom stroju se mogu ispitati čelična užad promjera 63 mm i maksimalne dužine 6 m

Sidra čeličnih žičanih kabela, metode ispitivanja i njihovi rezultati

The present paper introduces an application of the acoustic and thermographic method in the defectoscopic testing of immobile steel wire ropes at the most critical point, the anchor. First measurements and their results by these new defectoscopic methods are shown. In defectoscopic tests at the anchor, the widely used magnetic method gives unreliable results, and therefore presents a problem for steel wire defectoscopy. Application of the two new methods in the steel wire defectoscopy at the anchor point will enable increased safety measures at the anchor of steel wire ropes in bridge, roof, tower and aerial cable lift constructions.U ovom prilogu predstavlja se primjena jedne akustičke i termografske metode u defektoskopskom ispitivanju nepokretnih čeličnih žičanih kablova na najkritičnijoj točki, na sidru. Najprije su prikazana mjerenja i njihovi rezultati dobiveni tim novim defektoskopskim metodama. U defektoskopskim ispitivanjima na sidru naširoko korištena magnetska metoda pruža nepouzdane rezultate te stoga predstavlja problem za defektoskopiju čelične žice. Primjena dviju novih metoda u defektoskopiji čelične žice na točki sidra omogućit će uporabu mjera veće sigurnosti na sidru čeličnih žičanih kablova u konstrukcijama mostova, krovova, tornjeva, žičara

Sidra čeličnih žičanih kabela, metode ispitivanja i njihovi rezultati

The present paper introduces an application of the acoustic and thermographic method in the defectoscopic testing of immobile steel wire ropes at the most critical point, the anchor. First measurements and their results by these new defectoscopic methods are shown. In defectoscopic tests at the anchor, the widely used magnetic method gives unreliable results, and therefore presents a problem for steel wire defectoscopy. Application of the two new methods in the steel wire defectoscopy at the anchor point will enable increased safety measures at the anchor of steel wire ropes in bridge, roof, tower and aerial cable lift constructions.U ovom prilogu predstavlja se primjena jedne akustičke i termografske metode u defektoskopskom ispitivanju nepokretnih čeličnih žičanih kablova na najkritičnijoj točki, na sidru. Najprije su prikazana mjerenja i njihovi rezultati dobiveni tim novim defektoskopskim metodama. U defektoskopskim ispitivanjima na sidru naširoko korištena magnetska metoda pruža nepouzdane rezultate te stoga predstavlja problem za defektoskopiju čelične žice. Primjena dviju novih metoda u defektoskopiji čelične žice na točki sidra omogućit će uporabu mjera veće sigurnosti na sidru čeličnih žičanih kablova u konstrukcijama mostova, krovova, tornjeva, žičara

Reliable and Elastic Propagation of Cortical Seizures In Vivo

Mapping the fine-scale neural activity that underlies epilepsy is key to identifying potential control targets of this frequently intractable disease. Yet, the detailed in vivo dynamics of seizure progression in cortical microcircuits remain poorly understood. We combine fast (30-Hz) two-photon calcium imaging with local field potential (LFP) recordings to map, cell by cell, the spread of locally induced (4-AP or picrotoxin) seizures in anesthetized and awake mice. Using single-layer and microprism-assisted multilayer imaging in different cortical areas, we uncover reliable recruitment of local neural populations within and across cortical layers, and we find layer-specific temporal delays, suggesting an initial supra-granular invasion followed by deep-layer recruitment during lateral seizure spread. Intriguingly, despite consistent progression pathways, successive seizures show pronounced temporal variability that critically depends on GABAergic inhibition. We propose an epilepsy circuit model resembling an elastic meshwork, wherein ictal progression faithfully follows preexistent pathways but varies flexibly in time, depending on the local inhibitory restraint

Altered Cortical Ensembles in Mouse Models of Schizophrenia

In schizophrenia, brain-wide alterations have been identified at the molecular and cellular levels, yet how these phenomena affect cortical circuit activity remains unclear. We studied two mouse models of schizophrenia-relevant disease processes: chronic ketamine (KET) administration and Df(16)A+/-, modeling 22q11.2 microdeletions, a genetic variant highly penetrant for schizophrenia. Local field potential recordings in visual cortex confirmed gamma-band abnormalities similar to patient studies. Two-photon calcium imaging of local cortical populations revealed in both models a deficit in the reliability of neuronal coactivity patterns (ensembles), which was not a simple consequence of altered single neuron activity. This effect was present in ongoing and sensory-evoked activity and was not replicated by acute ketamine administration or pharmacogenetic parvalbumin-interneuron suppression. These results are consistent with the hypothesis that schizophrenia is an ‘‘attractor’’ disease and demonstrate that degraded neuronal ensembles are a common consequence of diverse genetic, cellular, and synaptic alterations seen in chronic schizophrenia

Self-induced laser line sweeping in double-clad Yb-doped fiber-ring lasers

International audienceExperimental observation of the self-induced laser line sweeping (SLLS) in fiber ring lasers is presented. The SLLS with the same gain fiber is studied in Fabry-Perot cavity for comparison. The SLLS effect manifests itself as a laser wavelength drift with speed of the order of nanometer per second from shorter to longer wavelengths across several nanometers and fast backward jump. Recently, the dynamics of the SLLS in a Fabry-Perot cavity fiber laser was qualitatively described by a dynamic grating induced by spatial-hole-burning in the ytterbium doped fiber where the lifetime of the grating was related to the self-sustained relaxation oscillations. In this paper we address possible discrepancies between the published theoretical model and earlier observations of SLLS, particularly in fiber-ring lasers.We show that the qualitative theoretical model developed for explaining SLLS in the Fabry-Perot cavity can be used also to explain the SLLS effect we observed earlier in fiber-ring lasers