Semi-rational engineering of Adh2 for improved methanol utilization in Komagataella phaffii

Please click Download on the upper right corner to see the full description

Evaluation of different expression systems for the heterologous expression of pyranose 2-oxidase from Trametes multicolor in E. coli

The heterologous production of the industrially relevant fungal enzyme pyranose 2-oxidase in the prokaryotic host E. coli was investigated using 3 different expression systems, i.e. the well-studied T7 RNA polymerase based pET21d+, the L-arabinose inducible pBAD and the pCOLD system. Preliminary experiments were done in shaking flasks at 25°C and optimized induction conditions to compare the productivity levels of the different expression systems. The pET21d+ and the pCOLD system gave 29 U/L·h and 14 U/L·h of active pyranose 2-oxidase, respectively, whereas the pBAD system only produced 6 U/L·h. Process conditions for batch fermentations were optimized for the pET21d+ and the pCOLD systems in order to reduce the formation of inactive inclusion bodies. The highest productivity rate with the pET21d+ expression system in batch fermentations was determined at 25°C with 32 U/L·h. The pCOLD system showed the highest productivity rate (19 U/L·h) at 25°C and induction from the start of the cultivation. Using the pCOLD system in a fed batch fermentation at 25°C with a specific growth rate of μ = 0.15 h-1resulted in the highest productivity rate of active pyranose oxidase with 206 U/L·h

Engineering of carbohydrate oxidoreductases for sensors and bio-fuelcells

Pyranose dehydrogenase (PDH) and pyranose 2-oxidase (POx) are flavoproteins that catalyze the oxidation of free, non-phosphorylated sugars to the corresponding ketosugars. Pyranose dehydrogenase has a broad substrate specificity for monosaccharides (and few disaccharides), but is limited to a narrow range of electron acceptors and reacts extremely slowly with dioxygen, whereas pyranose 2-oxidase shows pronounced specificity for glucose and displays high oxidase as well as dehydrogenase activity. For bio-fuelcell and sensor applications, oxygen reactivity is undesirable as it leads to electron leakage and the formation of damaging hydrogen peroxide; for biocatalytic applications, oxygen reactivity is advantageous, as oxygen is freely available and obviates downstream removal of undesired electron acceptors. Site-saturation mutagenesis libraries of eleven (POx) and twelve (PDH) residues around the active sites were screened for oxidase and dehydrogenase activities. In POx, variants T166R, Q448H, L545C, L547R and N593C displayed reduced oxidase activities (between 40% and 0.2% of the wildtype) concomitant with unaffected or even increased dehydrogenase activity, dependent on the electron acceptor used (DCPIP, 1,4-benzoquinone or ferricenium ion). Kinetic characterization showed that both affinity and turnover numbers can be affected. The switch from oxidase to dehydrogenase activity was also observed electrochemically using screen-printed electrodes. In this miniaturized set-up with a reaction volume of only 50 µL the dehydrogenase activity of variant N593C was entirely preserved in the presence of a suitable mediator, shuttling electrons from the FAD cofactor to the electrode surface. The oxidase activity, utilizing molecular oxygen as acceptor, is abolished in this variant. Of all variants of PDH that were produced by saturation mutagenesis, only variants of one position displayed increased oxygen reactivity to a minor degree. Histidine 103, carrying the covalently attached FAD cofactor, was substituted by tyrosine, phenylalanine, tryptophan and methionine. Variant H103Y displayed a five-fold increase of oxygen reactivity. Stopped flow analysis revealed that the mutation slowed down the reductive half-reaction whereas the oxidative half-reaction was affected to a minor degree. No alterations in the secondary structure were observed, but disruption of the FAD bond had negative effects on thermal and conformational stability. We also engineered PDH by systematically removing several N-glycosylation sites, in order to improve performance by reducing the distance of the active site to the electrode surface, improving accessibility for redox polymers and facilitate denser enzyme packing on the electrode. One glycosylation site, N319, was found to be indispensable for functional expression and folding of the enzyme, as no active variants could be obtained. A variant with two sites, N75 and N175 near the active site entrance, exchanged against G and Q, respectively, showed significantly improved properties when used on electrodes with Osmium-based redox polymers (Mediated Electron Transfer) and a low level of Direct Electron Transfer. The lack of two glycosylation sites results in minor negative effects on expression yield and stability. Removal of a third site, N252, on the opposite side of the active site entrance, does not bring further improvements in catalysis and electron transfer, but is detrimental to functional expression and stability. The bulk of hyperglycosylation of the recombinantly expressed enzyme (observed in both Pichia pastoris and Saccharomyces cerevisiae) is located only on this one glycosylation site. Please click Additional Files below to see the full abstract

Characterization of three pyranose dehydrogenase isoforms from the litter-decomposing basidiomycete Leucoagaricus meleagris (syn. Agaricus meleagris)

Nicht verfügbarMultigenicity is commonly found in fungal enzyme systems, with the purpose of functional compensation upon deficiency of one of its members or leading to enzyme isoforms with new functionalities through gene diversification. Three genes of the flavin-dependent glucosemethanolcholine (GMC) oxidoreductase pyranose dehydrogenase (AmPDH) were previously identified in the litter-degrading fungus Agaricus (Leucoagaricus) meleagris, of which only AmPDH1 was successfully expressed and characterized. The aim of this work was to study the biophysical and biochemical properties of AmPDH2 and AmPDH3 and compare them with those of AmPDH1. AmPDH1, AmPDH2 and AmPDH3 showed negligible oxygen reactivity and possess a covalently tethered FAD cofactor. All three isoforms can oxidise a range of different monosaccarides and oligosaccharides including glucose, mannose, galactose and xylose, which are the main constituent sugars of cellulose and hemicelluloses, and judging from the apparent steady-state kinetics determined for these sugars, the three isoforms do not show significant differences pertaining to their reaction with sugar substrates. They oxidize glucose both at C2 and C3 and upon prolonged reaction C2 and C3 double-oxidized glucose is obtained, confirming that the A. meleagris genes pdh2 (AY753308.1) and pdh3 (DQ117577.1) indeed encode CAZy class AA3_2 pyranose dehydrogenases. While reactivity with electron donor substrates was comparable for the three AmPDH isoforms, their kinetic properties differed significantly for the model electron acceptor substrates tested, a radical (the 2,2′-azino-bis[3-ethylbenzothiazoline-6-sulphonic acid] cation radical), a quinone (benzoquinone) and a complexed iron ion (the ferricenium ion). Thus, a possible explanation for this PDH multiplicity in A. meleagris could be that different isoforms react preferentially with structurally different electron acceptors in vivo.(VLID)192910

Quantitative transcript analysis of the inducible expression system pSIP: comparison of the overexpression of Lactobacillus spp. β-galactosidases in Lactobacillus plantarum

<p>Abstract</p> <p>Background</p> <p>Two sets of overlapping genes, <it>lacLMReu </it>and <it>lacLMAci</it>, encoding heterodimeric β-galactosidases from <it>Lactobacillus reuteri </it>and <it>Lactobacillus acidophilus</it>, respectively, have previously been cloned and expressed using the pSIP vector system and <it>Lactobacillus plantarum </it>WCSF1 as host. Despite the high similarity between these <it>lacLM </it>genes and the use of identical cloning and expression strategies, strains harboring <it>lacLMReu </it>produced about twenty-fold more β-galactosidase than strains containing <it>lacLMAci</it>.</p> <p>Results</p> <p>In this study, the plasmid copy numbers (PCN) of expression vectors pEH9R (<it>lacLMReu</it>) and pEH9A (<it>lacLMAci</it>) as well as the transcription levels of both <it>lacLM </it>genes were compared using quantitative PCR methods. Analyses of parallel fermentations of <it>L. plantarum </it>harboring either pEH9R or pEH9A showed that the expression plasmids were present in similar copy numbers. However, transcript levels of <it>lacLM </it>from <it>L. reuteri </it>(pEH9R) were up to 18 times higher than those of <it>lacLM </it>from <it>L. acidophilus </it>(pEH9A). As a control, it was shown that the expression levels of regulatory genes involved in pheromone-induced promoter activation were similar in both strains.</p> <p>Conclusion</p> <p>The use of identical expression strategies for highly similar genes led to very different mRNA levels. The data indicate that this difference is primarily caused by translational effects that are likely to affect both mRNA synthesis rates and mRNA stability. These translational effects thus seem to be a dominant determinant for the success of gene expression efforts in lactobacilli.</p

Semi-rational engineering of cellobiose dehydrogenase for improved hydrogen peroxide production

Abstract Background The ability of fungal cellobiose dehydrogenase (CDH) to generate H2O2 in-situ is highly interesting for biotechnological applications like cotton bleaching, laundry detergents or antimicrobial functionalization of medical devices. CDH’s ability to directly use polysaccharide derived mono- and oligosaccharides as substrates is a considerable advantage compared to other oxidases such as glucose oxidase which are limited to monosaccharides. However CDH’s low activity with oxygen as electron acceptor hampers its industrial use for H2O2 production. A CDH variant with increased oxygen reactivity is therefore of high importance for biotechnological application. Uniform expression levels and an easy to use screening assay is a necessity to facilitate screening for CDH variants with increased oxygen turnover. Results A uniform production and secretion of active Myriococcum thermophilum CDH was obtained by using Saccharomyces cerevisiae as expression host. It was found that the native secretory leader sequence of the cdh gene gives a 3 times higher expression than the prepro leader of the yeast α-mating factor. The homogeneity of the expression in 96-well deep-well plates was good (variation coefficient <15%). A high-throughput screening assay was developed to explore saturation mutagenesis libraries of cdh for improved H2O2 production. A 4.5-fold increase for variant N700S over the parent enzyme was found. For production, N700S was expressed in P. pastoris and purified to homogeneity. Characterization revealed that not only the kcat for oxygen turnover was increased in N700S (4.5-fold), but also substrate turnover. A 3-fold increase of the kcat for cellobiose with alternative electron acceptors indicates that mutation N700S influences the oxidative- and reductive FAD half-reaction. Conclusions Site-directed mutagenesis and directed evolution of CDH is simplified by the use of S. cerevisiae instead of the high-yield-host P. pastoris due to easier handling and higher transformation efficiencies with autonomous plasmids. Twelve clones which exhibited an increased H2O2 production in the subsequent screening were all found to carry the same amino acid exchange in the cdh gene (N700S). The sensitive location of the five targeted amino acid positions in the active site of CDH explains the high rate of variants with decreased or entirely abolished activity. The discovery of only one beneficial exchange indicates that a dehydrogenase’s oxygen turnover is a complex phenomenon and the increase therefore not an easy target for protein engineering.The authors thank the European Commission (FP7 243529-2-COTTONBLEACH) for financial support. CKP thanks the Austrian Science Fund (FWF) for financial support (grant P22094). IK is a member of the doctoral program BioToP (Biomolecular Technology of Proteins) of the Austrian Science Fund (FWF; W1224). MA thanks the Spanish Government for financial support (BIO2010-19697).Peer Reviewe

Heterologous expression of a recombinant lactobacillal -galactosidase in Lactobacillus plantarum: effect of different parameters on the sakacin P-based expression system

Background: Two overlapping genes lacL and lacM (lacLM) encoding for heterodimeric -galactosidase from Lactobacillus reuteri were previously cloned and over-expressed in the food-grade host strain Lactobacillus plantarum WCFS1, using the inducible lactobacillal pSIP expression system. In this study, we analyzed different factors that affect the production of recombinant L. reuteri -galactosidase. Results: Various factors related to the cultivation, i.e. culture pH, growth temperature, glucose concentration, as well as the induction conditions, including cell concentration at induction point and inducer concentration, were tested. Under optimal fermentation conditions, the maximum -galactosidase levels obtained were 130 U/mg protein and 3540 U/ml of fermentation broth corresponding to the formation of approximately 200 mg of recombinant protein per litre of fermentation medium. As calculated from the specific activity of the purified enzyme (190 U/mg), -galactosidase yield amounted to roughly 70% of the total soluble intracellular protein of the host organism. It was observed that pH and substrate (glucose) concentration are the most prominent factors affecting the production of recombinant -galactosidase. Conclusions: The over-expression of recombinant L. reuteri -galactosidase in a food-grade host strain was optimized, which is of interest for applications of this enzyme in the food industry. The results provide more detailed insight into these lactobacillal expression systems and confirm the potential of the pSIP system for efficient, tightly controlled expression of enzymes and proteins in lactobacilli.(VLID)90704

Mercury pollution for marine environment at Farwa Island, Libya

Coimmobilization of pyranose dehydrogenase as an enzyme catalyst, osmium redox polymers [Os­(4,4′-dimethoxy-2,2′-bipyridine)₂(poly­(vinylimidazole))₁₀Cl]⁺ or [Os­(4,4′-dimethyl-2,2′-bipyridine)₂(poly­(vinylimidazole))₁₀Cl]⁺ as mediators, and carbon nanotube conductive scaffolds in films on graphite electrodes provides enzyme electrodes for glucose oxidation. The recombinant enzyme and a deglycosylated form, both expressed in Pichia pastoris, are investigated and compared as biocatalysts for glucose oxidation using flow injection amperometry and voltammetry. In the presence of 5 mM glucose in phosphate-buffered saline (PBS) (50 mM phosphate buffer solution, pH 7.4, with 150 mM NaCl), higher glucose oxidation current densities, 0.41 mA cm^–2, are obtained from enzyme electrodes containing the deglycosylated form of the enzyme. The optimized glucose-oxidizing anode, prepared using deglycosylated enzyme coimmobilized with [Os­(4,4′-dimethyl-2,2′-bipyridine)₂(poly­(vinylimidazole))₁₀Cl]⁺ and carbon nanotubes, was coupled with an oxygen-reducing bilirubin oxidase on gold nanoparticle dispersed on gold electrode as a biocathode to provide a membraneless fully enzymatic fuel cell. A maximum power density of 275 μW cm^–2 is obtained in 5 mM glucose in PBS, the highest to date under these conditions, providing sufficient power to enable wireless transmission of a signal to a data logger. When tested in whole human blood and unstimulated human saliva maximum power densities of 73 and 6 μW cm^–2 are obtained for the same fuel cell configuration, respectively

Display of a β-mannanase and a chitosanase on the cell surface of Lactobacillus plantarum towards the development of whole-cell biocatalysts

BACKGROUND: Lactobacillus plantarum is considered as a potential cell factory because of its GRAS (generally recognized as safe) status and long history of use in food applications. Its possible applications include in situ delivery of proteins to a host, based on its ability to persist at mucosal surfaces of the human intestine, and the production of food-related enzymes. By displaying different enzymes on the surface of L. plantarum cells these could be used as whole-cell biocatalysts for the production of oligosaccharides. In this present study, we aimed to express and display a mannanase and a chitosanase on the cell surface of L. plantarum. RESULTS: ManB, a mannanase from Bacillus licheniformis DSM13, and CsnA, a chitosanase from Bacillus subtilis ATCC 23857 were fused to different anchoring motifs of L. plantarum for covalent attachment to the cell surface, either via an N-terminal lipoprotein anchor (Lp_1261) or a C-terminal cell wall anchor (Lp_2578), and the resulting fusion proteins were expressed in L. plantarum WCFS1. The localization of the recombinant proteins on the bacterial cell surface was confirmed by flow cytometry and immunofluorescence microscopy. The highest mannanase and chitosanase activities obtained for displaying L. plantarum cells were 890 U and 1360 U g dry cell weight, respectively. In reactions with chitosan and galactomannans, L. plantarum CsnA- and ManB-displaying cells produced chito- and manno-oligosaccharides, respectively, as analyzed by high performance anion exchange chromatography (HPAEC) and mass spectrometry (MS). Surface-displayed ManB is able to break down galactomannan (LBG) into smaller manno-oligosaccharides, which can support growth of L. plantarum. CONCLUSION: This study shows that mannanolytic and chitinolytic enzymes can be anchored to the cell surface of L. plantarum in active forms. L. plantarum chitosanase- and mannanase-displaying cells should be of interest for the production of potentially ‘prebiotic’ oligosaccharides. This approach, with the enzyme of interest being displayed on the cell surface of a food-grade organism, may also be applied in production processes relevant for food industry

Simple and efficient expression of Agaricus meleagris pyranose dehydrogenase in Pichia pastoris

Pyranose dehydrogenase (PDH) is a fungal flavin-dependent sugar oxidoreductase that is highly interesting for applications in organic synthesis or electrochemistry. The low expression levels of the filamentous fungus Agaricus meleagris as well as the demand for engineered PDH make heterologous expression necessary. Recently, Aspergillus species were described to efficiently secrete recombinant PDH. Here, we evaluate recombinant protein production with expression hosts more suitable for genetic engineering. Expression in Escherichia coli resulted in no soluble or active PDH. Heterologous expression in the methylotrophic yeast Pichia pastoris was investigated using two different signal sequences as well as a codon-optimized sequence. A 96-well plate activity screening for transformants of all constructs was established and the best expressing clone was used for large-scale production in 50-L scale, which gave a volumetric yield of 223 mg L−1 PDH or 1,330 U L−1 d−1 in space–time yield. Purification yielded 13.4 g of pure enzyme representing 95.8% of the initial activity. The hyperglycosylated recombinant enzyme had a 20% lower specific activity than the native enzyme; however, the kinetic properties were essentially identical. This study demonstrates the successful expression of PDH in the eukaryotic host organism P. pastoris paving the way for protein engineering. Additionally, the feasibility of large-scale production of the enzyme with this expression system together with a simplified purification scheme for easy high-yield purification is shown