460 research outputs found
Koordinationschemie perhalogenierter Cyclopentadiene und Alkine, X
Coordination Chemistry of Perhalogenated Cyclopentadienes and Alkynes, X[1]. - Synthesis and Molecular Structure of a Cyclopentadienyl-1,3-dithiol Complex, [C5Cl3(SH)2]Mn(CO)3
The reaction of [C5Cl4Li]Mn(CO)3 with elemental sulfur leads to [C5Cl4SLi]Mn(CO)3 (1), which is easily oxidized by air to the disulfide (OC)3Mn[C5Cl4S-SCl4C5]Mn(CO)3 (2). Addition of one equivalent of BuLi, followed by an excess of S8 produces the dithiolate [C5Cl3(SLi)2]Mn(CO)3 (3), which yields the dithiol [C5Cl3(SH)2]Mn(CO)3 (5) upon hydrolysis. The molecular structures of 2 and 5 have been determined by X-ray diffraction
Environmental considerations and current status of grouping and regulation of engineered nanomaterials
This article reviews the current status of nanotechnology with emphasis on application and related environmental considerations as well as legislation. Application and analysis of nanomaterials in infrastructure (construction, building coatings, and water treatment) is discussed, and in particular nanomaterial release during the lifecycle of these applications. Moreover, possible grouping approaches with regard to ecotoxicological and toxicological properties, and the fate of nanomaterials in the environment are evaluated. In terms of potential exposure, the opportunities that arise from leveraging advances in several key areas, such as water treatment and construction are addressed. Additionally, this review describes challenges with regard to the European Commission’s definition of ‘nanomaterial’. The revised REACH information requirements, intended to enable a comprehensive risk assessment of nanomaterials, are outlined
Analytical and toxicological aspects of nanomaterials in different product groups: Challenges and opportunities
The widespread integration of engineered nanomaterials into consumer and industrial products creates new challenges and requires innovative approaches in terms of design, testing, reliability, and safety of nanotechnology. The aim of this review article is to give an overview of different product groups in which nanomaterials are present and outline their safety aspects for consumers. Here, release of nanomaterials and related analytical challenges and solutions as well as toxicological considerations, such as dose-metrics, are discussed. Additionally, the utilization of engineered nanomaterials as pharmaceuticals or nutraceuticals to deliver and release cargo molecules is covered. Furthermore, critical pathways for human exposure to nanomaterials, namely inhalation and ingestion, are discussed in the context of risk assessment. Analysis of NMs in food, innovative medicine or food contact materials is discussed. Specific focus is on the presence and release of nanomaterials, including whether nanomaterials can migrate from polymer nanocomposites used in food contact materials. With regard to the toxicology and toxicokinetics of nanomaterials, aspects of dose metrics of inhalation toxicity as well as ingestion toxicology and comparison between in vitro and in vivo conclusions are considered. The definition of dose descriptors to be applied in toxicological testing is emphasized. In relation to potential exposure from different products, opportunities arising from the use of advanced analytical techniques in more unique scenarios such as release of nanomaterials from medical devices such as orthopedic implants are addressed. Alongside higher product performance and complexity, further challenges regarding material characterization and safety, as well as acceptance by the general public are expected
All-sky search for time-integrated neutrino emission from astrophysical sources with 7 years of IceCube data
Since the recent detection of an astrophysical flux of high energy neutrinos,
the question of its origin has not yet fully been answered. Much of what is
known about this flux comes from a small event sample of high neutrino purity,
good energy resolution, but large angular uncertainties. In searches for
point-like sources, on the other hand, the best performance is given by using
large statistics and good angular reconstructions. Track-like muon events
produced in neutrino interactions satisfy these requirements. We present here
the results of searches for point-like sources with neutrinos using data
acquired by the IceCube detector over seven years from 2008--2015. The
discovery potential of the analysis in the northern sky is now significantly
below , on average
lower than the sensitivity of the previously published analysis of four
years exposure. No significant clustering of neutrinos above background
expectation was observed, and implications for prominent neutrino source
candidates are discussed.Comment: 19 pages, 17 figures, 3 tables; ; submitted to The Astrophysical
Journa
The contribution of Fermi-2LAC blazars to the diffuse TeV-PeV neutrino flux
The recent discovery of a diffuse cosmic neutrino flux extending up to PeV
energies raises the question of which astrophysical sources generate this
signal. One class of extragalactic sources which may produce such high-energy
neutrinos are blazars. We present a likelihood analysis searching for
cumulative neutrino emission from blazars in the 2nd Fermi-LAT AGN catalogue
(2LAC) using an IceCube neutrino dataset 2009-12 which was optimised for the
detection of individual sources. In contrast to previous searches with IceCube,
the populations investigated contain up to hundreds of sources, the largest one
being the entire blazar sample in the 2LAC catalogue. No significant excess is
observed and upper limits for the cumulative flux from these populations are
obtained. These constrain the maximum contribution of the 2LAC blazars to the
observed astrophysical neutrino flux to be or less between around 10
TeV and 2 PeV, assuming equipartition of flavours at Earth and a single
power-law spectrum with a spectral index of . We can still exclude that
the 2LAC blazars (and sub-populations) emit more than of the observed
neutrinos up to a spectral index as hard as in the same energy range.
Our result takes into account that the neutrino source count distribution is
unknown, and it does not assume strict proportionality of the neutrino flux to
the measured 2LAC -ray signal for each source. Additionally, we
constrain recent models for neutrino emission by blazars.Comment: 18 pages, 22 figure
Comparison of Two Methods for In Vivo Estimation of the Glenohumeral Joint Rotation Center (GH-JRC) of the Patients with Shoulder Hemiarthroplasty
Determination of an accurate glenohumeral-joint rotation center (GH-JRC) from marker data is essential for kinematic and dynamic analysis of shoulder motions. Previous studies have focused on the evaluation of the different functional methods for the estimation of the GH-JRC for healthy subjects. The goal of this paper is to compare two widely used functional methods, namely the instantaneous helical axis (IHA) and symmetrical center of rotation (SCoRE) methods, for estimating the GH-JRC in vivo for patients with implanted shoulder hemiarthroplasty. The motion data of five patients were recorded while performing three different dynamic motions (circumduction, abduction, and forward flexion). The GH-JRC was determined using the CT-images of the subjects (geometric GH-JRC) and was also estimated using the two IHA and SCoRE methods. The rotation centers determined using the IHA and SCoRE methods were on average 1.47±0.62 cm and 2.07±0.55 cm away from geometric GH-JRC, respectively. The two methods differed significantly (two-tailed p-value from paired t-Test ∼0.02, post-hoc power ∼0.30). The SCoRE method showed a significant lower (two-tailed p-value from paired t-Test ∼0.03, post-hoc power ∼0.68) repeatability error calculated between the different trials of each motion and each subject and averaged across all measured subjects (0.62±0.10 cm for IHA vs. 0.43±0.12 cm for SCoRE). It is concluded that the SCoRE appeared to be a more repeatable method whereas the IHA method resulted in a more accurate estimation of the GH-JRC for patients with endoprostheses
Prediction of Muscle Energy States at Low Metabolic Rates Requires Feedback Control of Mitochondrial Respiratory Chain Activity by Inorganic Phosphate
The regulation of the 100-fold dynamic range of mitochondrial ATP synthesis flux in skeletal muscle was investigated. Hypotheses of key control mechanisms were included in a biophysical model of oxidative phosphorylation and tested against metabolite dynamics recorded by 31P nuclear magnetic resonance spectroscopy (31P MRS). Simulations of the initial model featuring only ADP and Pi feedback control of flux failed in reproducing the experimentally sampled relation between myoplasmic free energy of ATP hydrolysis (ΔGp = ΔGpo′+RT ln ([ADP][Pi]/[ATP]) and the rate of mitochondrial ATP synthesis at low fluxes (<0.2 mM/s). Model analyses including Monte Carlo simulation approaches and metabolic control analysis (MCA) showed that this problem could not be amended by model re-parameterization, but instead required reformulation of ADP and Pi feedback control or introduction of additional control mechanisms (feed forward activation), specifically at respiratory Complex III. Both hypotheses were implemented and tested against time course data of phosphocreatine (PCr), Pi and ATP dynamics during post-exercise recovery and validation data obtained by 31P MRS of sedentary subjects and track athletes. The results rejected the hypothesis of regulation by feed forward activation. Instead, it was concluded that feedback control of respiratory chain complexes by inorganic phosphate is essential to explain the regulation of mitochondrial ATP synthesis flux in skeletal muscle throughout its full dynamic range
STRENDA DB : enabling the validation and sharing of enzyme kinetics data
Standards for reporting enzymology data (STRENDA) DB is a validation and storage system for enzyme function data that incorporates the STRENDA Guidelines. It provides authors who are preparing a manuscript with a user‐friendly, web‐based service that checks automatically enzymology data sets entered in the submission form that they are complete and valid before they are submitted as part of a publication to a journal
- …