L-Proline Catalyzed Michael Additions of Thiophenols to α,β-Unsaturated Compounds, Particularly α-Enones, in the Ionic Liquid [bmim]PF6

L-Proline catalyzed additions of 13 different thiols to 11 different α-enoneMichael acceptors in [bmim] PF6 are reported. Reasonable to high yields of the reactionproducts were isolated in most cases

L-Proline Catalyzed Michael Additions of Thiophenols to α,β-Unsaturated Compounds, Particularly α-Enones, in the Ionic Liquid [bmim]PF6

L-Proline catalyzed additions of 13 different thiols to 11 different α-enoneMichael acceptors in [bmim] PF6 are reported. Reasonable to high yields of the reactionproducts were isolated in most cases

Reduced graphite oxide in supercapacitor electrodes

The current energy needs have put the focus on highly efficient energy storage systems such as supercapacitors. At present, much attention focuses on graphene-like materials as promising supercapacitor electrodes. Here we show that reduced graphite oxide offers a very interesting potential. Materials obtained by oxidation of natural graphite and subsequent sonication and reduction by hydrazine achieve specific capacitances as high as 170 F/g in H2SO4 and 84 F/g in (C2H5)4NBF4/acetonitrile. Although the particle size of the raw graphite has no significant effect on the physico-chemical characteristics of the reduced materials, that exfoliated from smaller particles (<75 μm) result more advantageous for the release of the stored electrical energy. This effect is particularly evident in the aqueous electrolyte. Graphene-like materials may suffer from a drop in their specific surface area upon fabrication of electrodes with features of the existing commercial devices. This should be taken into account for a reliable interpretation of their performance in supercapacitors.Financial support from EU 7FP [Project Electrograph-266391], the project VEGA 1254/12 (M.H.) and MICINN [MAT 2011-25198] (T.A.C.) is gratefully acknowledged. The authors are grateful to Prof. Viera Skákalová for the useful discussions and critical remarks.Peer reviewe

Biomass waste-carbon/reduced graphene oxide composite electrodes for enhanced supercapacitors

We present a simple and effective alternative which optimizes electrodes based on low-cost carbons for high-performance supercapacitors. The combination with reduced graphene oxide (rGO) greatly improves the operation of microporous carbons easily produced by one-pot activation of grape seeds. The use of composite electrodes with rGO lowers the supercapacitor resistance and enables a much higher rate capability. The mixture of rGO flakes and particles of a highly porous carbon obtained by KOH activation allows retaining the high capacitance of 260 F g−1 of the standard electrodes at 1 mA cm−2 in aqueous H2SO4 whereas the value at 200 mA cm−2 is increased by around 2.4 times. Consequently, at high current density, the capacitor assembled with these composites stores eight times more energy and the power density is multiplied by four. The synergy between rGO and an ultramicroporous carbon produced by CO2-activation results extremely profitable, the cell assembled with composite electrodes reaching three times more energy and power at 200 mA cm−2 than the best performance of the standard counterpart. More importantly, the higher density of the composite electrodes leads to a capacitance of around 200 F cm−3 which translates into a remarkable improvement in the supercapacitor operation normalized to volume.T.A.C. gratefully acknowledges the funding from CSIC [Proyecto Intramural Especial 2016 8 0E035]. V.V. and V.S. thank the support by Slovak Research and Development Agency under the contract APVV-16-0319.Peer reviewe

Physical Properties Investigation of Reduced Graphene Oxide Thin Films Prepared by Material Inkjet Printing

The article is focused on the study of the optical properties of inkjet-printed graphene oxide (GO) layers by spectroscopic ellipsometry. Due to its unique optical and electrical properties, GO can be used as, for example, a transparent and flexible electrode material in organic and printed electronics. Spectroscopic ellipsometry was used to characterize the optical response of the GO layer and its reduced form (rGO, obtainable, for example, by reduction of prepared layers by either annealing, UV radiation, or chemical reduction) in the visible range. The thicknesses of the layers were determined by a mechanical profilometer and used as an input parameter for optical modeling. Ellipsometric spectra were analyzed according to the dispersion model and the influence of the reduction of GO on optical constants is discussed. Thus, detailed analysis of the ellipsometric data provides a unique tool for qualitative and also quantitative description of the optical properties of GO thin films for electronic applications

Chemical Oxidation of Graphite: Evolution of the Structure and Properties

Graphene oxide is a complex material whose synthesis is still incompletely understood. To study the time evolution of structural and chemical properties of oxidized graphite, samples at different temporal stages of oxidation were selected and characterized through a number of techniques: X-ray photoelectron spectroscopy for the content and bonding of oxygen, X-ray diffraction for the level of intercalation, Raman spectroscopy for the detection of structural changes, electrical resistivity measurements for probing charge localization on the macroscopic scale, and scanning transmission electron microscopy for the atomic structure of the graphene oxide flakes. We found a nonlinear behavior of oxygen uptake with time where two concentration plateaus were identified: Uptake reached 20 at % in the first 15 min, and after 1 h a second uptake started, reaching a highest oxygen concentration of >30 at % after 2 h of oxidation. At the same time, the interlayer distance expanded to more than twice the value of graphite and the electrical resistivity increased by seven orders of magnitude. After 4 days of chemical processing, the expanded structure of graphite oxide became unstable and spontaneously exfoliated; more than 2 weeks resulted in a significant decrease in the oxygen content accompanied by reaggregation of the GO sheets. These correlated measurements allow us to offer a comprehensive view into the complex oxidation process

Towards exotic layered materials : 2D cuprous iodide

Heterostructures composed of two-dimensional (2D) materials are already opening many new possibilities in such fields of technology as electronics and magnonics, but far more could be achieved if the number and diversity of 2D materials is increased. So far, only a few dozen 2D crystals have been extracted from materials that exhibit a layered phase in ambient conditions, omitting entirely the large number of layered materials that may exist in other temperatures and pressures. Here, we demonstrate how these structures can be stabilized in 2D van der Waals stacks under room temperature via growing them directly in graphene encapsulation by using graphene oxide as the template material. Specifically, we produce an ambient stable 2D structure of copper and iodine, a material that normally only occurs in layered form at elevated temperatures between 645 and 675 K. Our results establish a route to the production of more exotic phases of materials that would otherwise be difficult or impossible to stabilize for experiments in ambient.Comment: 15 pages, 6 figures, separate supplementary material include

Computational insights and the observation of SiC nanograin assembly: towards 2D silicon carbide

While an increasing number of two-dimensional (2D) materials, including graphene and silicene, have already been realized, others have only been predicted. An interesting example is the two-dimensional form of silicon carbide (2D-SiC). Here, we present an observation of atomically thin and hexagonally bonded nanosized grains of SiC assembling temporarily in graphene oxide pores during an atomic resolution scanning transmission electron microscopy experiment. Even though these small grains do not fully represent the bulk crystal, simulations indicate that their electronic structure already approaches that of 2D-SiC. This is predicted to be flat, but some doubts have remained regarding the preference of Si for sp 3 hybridization. Exploring a number of corrugated morphologies, we find completely flat 2D-SiC to have the lowest energy. We further compute its phonon dispersion, with a Raman-active transverse optical mode, and estimate the core level binding energies. Finally, we study the chemical reactivity of 2D-SiC, suggesting it is like silicene unstable against molecular absorption or interlayer linking. Nonetheless, it can form stable van der Waals-bonded bilayers with either graphene or hexagonal boron nitride, promising to further enrich the family of two-dimensional materials once bulk synthesis is achieved.© The Author(s) 201